Jump to content

Recommended Posts

Posted (edited)

Buttons for flaps up and down but step by step.

Currently, we only have F (fully up and down) and individual flap positions (off, take-off and landing), but it would be nice to have the flap positions up one level and down one level. While this is less realistic, it's easier to set up the controllers.

Edited by YoYo
  • Like 1

Webmaster of http://www.yoyosims.pl

Yoyosimsbanner.gif

Win 10 64, i9-13900 KF, RTX  5090 32Gb OC, RAM 64Gb Corsair Vengeance LED OC@3600MHz,, 3xSSD+3xSSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5, [MSFS, P3Dv5, DCS, RoF, Condor2, IL-2 CoD/BoX] VR fly only: Meta Quest Pro

Posted (edited)
2 hours ago, YoYo said:

Buttons for flaps up and down but step by step.

Currently, we only have F (fully up and down) and individual flap positions (off, take-off and landing), but it would be nice to have the flap positions up one level and down one level. While this is less realistic, it's easier to set up the controllers.

In real life, the Mig-29 only has 2 flap positions. Up and Down. See this other thread where it explains why the flap selector panel has an UP and 2 Down switches.

 

Edited by CF104
Posted
6 minutes ago, CF104 said:

In real life, the Mig-29 only has 2 flap positions. Up and Down. See this other thread where it explains why the flap selector panel has an UP and 2 Down switches.

 

?
Did you read carefully what I wrote?

  • Like 1

Webmaster of http://www.yoyosims.pl

Yoyosimsbanner.gif

Win 10 64, i9-13900 KF, RTX  5090 32Gb OC, RAM 64Gb Corsair Vengeance LED OC@3600MHz,, 3xSSD+3xSSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5, [MSFS, P3Dv5, DCS, RoF, Condor2, IL-2 CoD/BoX] VR fly only: Meta Quest Pro

Posted
6 minutes ago, YoYo said:

?
Did you read carefully what I wrote?

What does it matter? Just use flaps up as your “up one level” and either take off flaps or landing flaps as your “down one level”.

It doesn’t matter, as they are functionally the same. 🤷‍♀️

Spoiler

Ryzen 7 9800X3D | 96GB G.Skill Ripjaws M5 Neo DDR5-6000 | Asus ProArt RTX 4080 Super | ASUS ROG Strix X870E-E GAMING | Samsung 990Pro 2TB + 990Pro 4TB NMVe | VR: Varjo Aero
VPC MT-50CM2 grip on VPForce Rhino with Z-curve extension | VPC CM3 throttle | VPC CP2 + 3 | FSSB R3L | VPC Rotor TCS Plus base with SharKa-50 grip | Everything mounted on Monstertech MFC-1 | VPC R1-Falcon pedals with damper | Pro Flight Trainer Puma

OpenXR | PD 1.0 | 100% render resolution | DCS graphics settings
Win11 Pro 24H2 - VBS/HAGS/Game Mode ON

 

Posted
3 hours ago, Raven (Elysian Angel) said:

What does it matter? Just use flaps up as your “up one level” and either take off flaps or landing flaps as your “down one level”.

It doesn’t matter, as they are functionally the same. 🤷‍♀️

It doesn't work that way. You have three buttons for flaps: off, takeoff, and landing. Having two flap buttons won't give you the takeoff position, for example. The current setup doesn't work on an up and down basis (which is realistic, but not very convenient, as I mentioned, if you only want to use two buttons for flaps only).

  • Like 1

Webmaster of http://www.yoyosims.pl

Yoyosimsbanner.gif

Win 10 64, i9-13900 KF, RTX  5090 32Gb OC, RAM 64Gb Corsair Vengeance LED OC@3600MHz,, 3xSSD+3xSSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5, [MSFS, P3Dv5, DCS, RoF, Condor2, IL-2 CoD/BoX] VR fly only: Meta Quest Pro

Posted

As earlier mentioned, there is no "takeoff" position at all. The "takeoff" position button gives the exact same flap/slat settings as the "landing" position. This makes sense from a manufacturing perspective because it's easier to re-use MiG-21 cockpit parts or whatever instead of making an entirely separate switch box for the MiG-29. 

However what I don't get is why the indicator also shows a half-flaps settings when it's clearly been designed in the shape of a MiG-29 and has not been recycled from another aircraft like the flaps switch box has.

  • Like 1
Posted (edited)
4 hours ago, YoYo said:

It doesn't work that way

I suggest you read through that thread. There have been discussions about it on the Russian forum too, apparently.

Edited by Raven (Elysian Angel)
  • Like 1
Spoiler

Ryzen 7 9800X3D | 96GB G.Skill Ripjaws M5 Neo DDR5-6000 | Asus ProArt RTX 4080 Super | ASUS ROG Strix X870E-E GAMING | Samsung 990Pro 2TB + 990Pro 4TB NMVe | VR: Varjo Aero
VPC MT-50CM2 grip on VPForce Rhino with Z-curve extension | VPC CM3 throttle | VPC CP2 + 3 | FSSB R3L | VPC Rotor TCS Plus base with SharKa-50 grip | Everything mounted on Monstertech MFC-1 | VPC R1-Falcon pedals with damper | Pro Flight Trainer Puma

OpenXR | PD 1.0 | 100% render resolution | DCS graphics settings
Win11 Pro 24H2 - VBS/HAGS/Game Mode ON

 

Posted (edited)
8 hours ago, Nealius said:

As earlier mentioned, there is no "takeoff" position at all. The "takeoff" position button gives the exact same flap/slat settings as the "landing" position. This makes sense from a manufacturing perspective because it's easier to re-use MiG-21 cockpit parts or whatever instead of making an entirely separate switch box for the MiG-29. 

However what I don't get is why the indicator also shows a half-flaps settings when it's clearly been designed in the shape of a MiG-29 and has not been recycled from another aircraft like the flaps switch box has.

This is not true. The Take-off (in Russian: VZLOT) and Landing (in Russian: PASADKA) positions of buttons provide different configurations.

This was also confirmed to me a moment ago by a pilot I know who flew the MiG-29 9-12A for 12 years in our military. The roll angle is different, even if it's not visible in the DCS.

This has been confirmed here, there are basically 3 different configurations:

This does not change the fact that I think we should still have a setting for the up and down buttons of flaps and that is what this request is about.

Edited by YoYo
  • Like 1

Webmaster of http://www.yoyosims.pl

Yoyosimsbanner.gif

Win 10 64, i9-13900 KF, RTX  5090 32Gb OC, RAM 64Gb Corsair Vengeance LED OC@3600MHz,, 3xSSD+3xSSD M.2 NVMe, Predator XB271HU res.2560x1440 27'' G-sync, Sound Blaster Z + 5.1, TiR5, [MSFS, P3Dv5, DCS, RoF, Condor2, IL-2 CoD/BoX] VR fly only: Meta Quest Pro

Posted

Providing flaps as an axis binding would be great, also for other mods.

  • Like 1

System: HP Z2 Tower, Win11 24H2, i9-14900K, 64GB RAM, 8TB SSD (M2) + 18TB HDD (Sata), GeForce RTX4070 TI Super 16GB VRAM, Samsung Odyssey 57" curved monitor (main screen) + BenQ 32" UW3270 (secondary screen), VKB Gunfighter Ultimate MK4 + S-TECS Throttle

DCS: All terrains, allmost all modules, most user flyable mods - CA, WWII Assets

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...