delevero Posted January 13, 2010 Posted January 13, 2010 Dear Forum. Does anyone have a solution to how i can fix the following graphic problem. http://cdreparation.dk/arma2/blackshark%20graphic%20problem.jpg it look like horisontal white snow lines in the small video screen, but the game world look normal in the cockpit and outside... the problem is isolated to the small camera screen. It was actually difficult to make this photo since the lines are flashing very fast and somehow i got a good picture every time not showing the problem. My computer core i7 940 12gb ram nvidia 295 latest direct x, and latest graphic driver.. I belive it could properbly have something to do with Vsync or that i have HT enabled for my core i7 in Bios. The game have worked fine in the past. I have installed a fresh copy of the game, and patch 1.0.1c, i have the download version of the game.
EtherealN Posted January 13, 2010 Posted January 13, 2010 HT enabled/disabled should not be able to cause that effect. What are your Anisotropic Filtering settings? A DxDiag output file (directions here: http://forums.eagle.ru/showthread.php?t=44466) would help in getting an overview of possible driver issues. [sIGPIC][/sIGPIC] Daniel "EtherealN" Agorander | Даниэль "эфирныйн" Агорандер Intel i7 2600K @ 4.4GHz, ASUS Sabertooth P67, 8GB Corsair Vengeance @ 1600MHz, ASUS GTX 560Ti DirectCU II 1GB, Samsung 830series 512GB SSD, Corsair AX850w, two BENQ screens and TM HOTAS Warthog DCS: A-10C Warthog FAQ | DCS: P-51D FAQ | Remember to read the Forum Rules | | | Life of a Game Tester
ED Team Wags Posted January 13, 2010 ED Team Posted January 13, 2010 Disable "Select the multi-GPU configuration" in 3D settings. Dear Forum. Does anyone have a solution to how i can fix the following graphic problem. http://cdreparation.dk/arma2/blackshark%20graphic%20problem.jpg it look like horisontal white snow lines in the small video screen, but the game world look normal in the cockpit and outside... the problem is isolated to the small camera screen. It was actually difficult to make this photo since the lines are flashing very fast and somehow i got a good picture every time not showing the problem. My computer core i7 940 12gb ram nvidia 295 latest direct x, and latest graphic driver.. I belive it could properbly have something to do with Vsync or that i have HT enabled for my core i7 in Bios. The game have worked fine in the past. I have installed a fresh copy of the game, and patch 1.0.1c, i have the download version of the game. Youtube: https://www.youtube.com/user/wagmatt Twitch: wagmatt System: https://forums.eagle.ru/showthread.php?p=3729544#post3729544
TheMoose Posted January 13, 2010 Posted January 13, 2010 (edited) I do not recall seing this before and I have a Nvidia 280. What's the OS? I'm on 64bit Seven. Using Nvidia Drivers 191.07, not the latest, since the latest gave me issues... Let us know if Wags trick does the thing... I'm curious. My setting is set to Mix Multi display peformance. AA=8x AF=0 Edited January 13, 2010 by TheMoose Antec 900 gaming tower, PSU: Corsair 750W, Q6600, Asus P5K, 8Gig Mushkin, Nvidia eVGA 280 GTX Superclocked 1G DDR3, SSDNOW200 Kingston Drive, TrackIr 3000+Vector, Logitech Extreme 3D Pro joystick, Saitek rudder pedals pro, Sharp 42" inch LCD Aquo. OS: windows 7 64bit.
delevero Posted January 13, 2010 Author Posted January 13, 2010 Hi and thank you for all the comments.. Here are my dxdiag.. i will try the above tips and tricks... system is windows 7 64bit... dxdiag http://cdreparation.dk/arma2/DxDiag.txt But i have been able to run the game before perfect on this computer with the same hardware so i know its working ;-) I let you know if the tips are working
delevero Posted January 13, 2010 Author Posted January 13, 2010 Problem solved Problem Solved :thumbup: Okay first of all thank all of you for comments they were helpfull. And the winner is..: wags for the comment disable multi gpu Well i had actually tried disabling the Multi gpu by making a profile in the Nvidia control panel so that every time i press the startup link it would modify the start file in blackshark that is named launch.exe so that it would automatic disable multi gpu every time i start the game.. Well it did actually disable multi gpu, but there is one little difference in Blackshark if you compare it to many other games.... The launch.exe is NOT the game, its just the menu of the game/simulator.. So when making an automatic profile you have to disable multi gpu with the file named DCS.exe and not launch.exe So when making these automatic rules about disabling multi gpu in the directory bin/stable/ then now you know that its the file dcs.exe that is important. It only took a few houres to figure out i have been so close fixing the problem... :doh: I notised when i disabled physx and multigpu manual..... dooh then it did surdenly work. But now its working perfect the automatic way.
Distiler Posted January 13, 2010 Posted January 13, 2010 I do not recall seing this before and I have a Nvidia 280. What's the OS? I'm on 64bit Seven. Using Nvidia Drivers 191.07, not the latest, since the latest gave me issues... Let us know if Wags trick does the thing... I'm curious. My setting is set to Mix Multi display peformance. AA=8x AF=0 AF=0 o_O setup AF to 8, it greatly increase texture quality when seen from certain angle/perspective (best example is a runway seen from low elevation position, AF 0 makes the runway blurry) AMD Ryzen 1400 // 16 GB DDR4 2933Mhz // Nvidia 1060 6GB // W10 64bit // Microsoft Sidewinder Precision 2
TAIPAN_ Posted January 15, 2010 Posted January 15, 2010 Problem Solved :thumbup: Okay first of all thank all of you for comments they were helpfull. And the winner is..: wags for the comment disable multi gpu Well i had actually tried disabling the Multi gpu by making a profile in the Nvidia control panel so that every time i press the startup link it would modify the start file in blackshark that is named launch.exe so that it would automatic disable multi gpu every time i start the game.. Well it did actually disable multi gpu, but there is one little difference in Blackshark if you compare it to many other games.... The launch.exe is NOT the game, its just the menu of the game/simulator.. So when making an automatic profile you have to disable multi gpu with the file named DCS.exe and not launch.exe So when making these automatic rules about disabling multi gpu in the directory bin/stable/ then now you know that its the file dcs.exe that is important. It only took a few houres to figure out i have been so close fixing the problem... :doh: I notised when i disabled physx and multigpu manual..... dooh then it did surdenly work. But now its working perfect the automatic way. I also had the same problem, it started when I setup multi monitor. Wags - I have a different fix, if you want to keep Multi-GPU configuration. All I did was change the DCS graphics settings to set the cockpit to 1024 every frame, instead of 1024. Fixed immediately :) Pimax Crystal VR & Simpit User | Ryzen CPU & Nvidia RTX GPU | Some of my mods
delevero Posted January 15, 2010 Author Posted January 15, 2010 (edited) good tip I also had the same problem, it started when I setup multi monitor. Wags - I have a different fix, if you want to keep Multi-GPU configuration. All I did was change the DCS graphics settings to set the cockpit to 1024 every frame, instead of 1024. Fixed immediately :) That sound very interesting, i will try that, thank you for the tip ** Setting the cockpit to 1024 every frame and enabling Multi Gpu is working 100% ** ( Fantastic ) Edited January 15, 2010 by delevero
Recommended Posts