Jump to content

Recommended Posts

Posted

Here is a new quick and dirty guide to get people up-to-speed and running in the Su-25T. New-comers should find it useful to get the plane up in the air and ready to play with the buttons. It covers the majority of useful commands and tips.

Up-to-Speed Guide to the Su-25T

 

Any errors or problems, let me know.

 

Up-to-Speed Guides for both Su-25T and A-10

ZoomBoy

My Flight Sims Page

- Link to My Blog - Sims and Things - DCS Stuff++

- Up-to-Speed Guides to the old Lockon A10A and Su-25T

- Some missions [needs update]

Posted

WOW!

 

Nice page, lots of great information there. Zoomboy you seem to be doing it all these days!

 

Thanks a lot, from a guy who's had ZERO flight time in the T since 1.1 came out (Real Life distractions) but DOES have internet access at work to at least READ about it .... :)

Posted

From feed-back I've received, I will be adding an auto-pilot/trimming section. Just need to do some research before completing it.

ZoomBoy

My Flight Sims Page

- Link to My Blog - Sims and Things - DCS Stuff++

- Up-to-Speed Guides to the old Lockon A10A and Su-25T

- Some missions [needs update]

Posted

Updated the Guide with the Auto-pilot(6 to 7 modes) and trimming info. Also included is a bit on the “Combat steering” mode.

ZoomBoy

My Flight Sims Page

- Link to My Blog - Sims and Things - DCS Stuff++

- Up-to-Speed Guides to the old Lockon A10A and Su-25T

- Some missions [needs update]

Posted
Updated the Guide with the Auto-pilot(6 to 7 modes) and trimming info. Also included is a bit on the “Combat steering” mode.

 

Excellent synopsis. One correction perhaps. It's been my experience that the autopilot modes "A" and "ALT-6" are identical. "A" no longer provides autothrottle. You must adjust the throttle for both.

 

Rich

YouTube Channel: https://www.youtube.com/channel/UCU1...CR6IZ7crfdZxDg

 

_____

Win 11 Pro x64, Asrock Z790 Steel Legend MoBo, Intel i7-13700K, MSI RKT 4070 Super 12GB, Corsair Dominator DDR5 RAM 32GB.

Posted

Fixed some bits(thanks Ironhand,AStotzer and others) and I've also compiled some Mission advice(link at the bottom of Guide) which has an extra practice mission.

ZoomBoy

My Flight Sims Page

- Link to My Blog - Sims and Things - DCS Stuff++

- Up-to-Speed Guides to the old Lockon A10A and Su-25T

- Some missions [needs update]

Posted
Do you have quick guides to the other planes

Nope, just A-10 and Su-25T.

Except for the Dog-fighting, Bombs to drop/Missiles to shoot, Combat/Navigation Modes sections, most of the commands are the same.

ZoomBoy

My Flight Sims Page

- Link to My Blog - Sims and Things - DCS Stuff++

- Up-to-Speed Guides to the old Lockon A10A and Su-25T

- Some missions [needs update]

  • ED Team
Posted

Great guide ZoomBoy27!

 

Can I make some small corrections about autopilot modes?

 

ALT-3 engages ONLY "Emeregency Leveling" mode and never "Combat Autopilot Mode".

 

When your are in "Combat Autopilot Mode" with something locked by "Shkval" system, pressing ALT-~ you will get control ONLY over pitch. It is usefull for finall ingress at the target. When you will depress ALT-~ the autopilot will return your airplane at the initial altitude. The initial altitude is one wich was at moment of the mode turning-on ("A" key).

 

Another one.

Lock any point at ground by "Shkval". Then engage "Combat Autopilot" (By "A" key).

Now you can leave controls and search targets by moving TDC - your plane simply will follow TDC movements. Also try same with strong crosswinds (something about 10-12 km/h). You will see that plane will get some lead angle to compensate wind.

[sIGPIC][/sIGPIC]

 

К чему стадам дары свободы?

Их должно резать или стричь.

Наследство их из рода в роды

Ярмо с гремушками да бич.

Posted
Great guide ZoomBoy27!...

ALT-3 engages ONLY "Emeregency Leveling" mode and never "Combat Autopilot Mode".

 

Thanks.

So ALT-3 is not a whole auto-pilot mode but just levels you out and then puts you into Barometric Altitude Hold? I read the manual(pg 49) and it seems that way.

Otherwise corrected as best as I can.

ZoomBoy

My Flight Sims Page

- Link to My Blog - Sims and Things - DCS Stuff++

- Up-to-Speed Guides to the old Lockon A10A and Su-25T

- Some missions [needs update]

  • ED Team
Posted
Thanks.

So ALT-3 is not a whole auto-pilot mode but just levels you out and then puts you into Barometric Altitude Hold? I read the manual(pg 49) and it seems that way.

Otherwise corrected as best as I can.

 

Yes. Also "Emeregency Leveling" will be engaged automatically from "Combat" mode if you will break the lock.

When you will press "A" key from any non-navigational mode the "Emeregency Leveling" will be engaged instead of "Route".

[sIGPIC][/sIGPIC]

 

К чему стадам дары свободы?

Их должно резать или стричь.

Наследство их из рода в роды

Ярмо с гремушками да бич.

Posted
Yes. Also "Emeregency Leveling" will be engaged automatically from "Combat" mode if you will break the lock.

When you will press "A" key from any non-navigational mode the "Emergency Leveling" will be engaged instead of "Route".

 

Corrected that as weel. I even gave Emergency Leveling Mode its own special font

 

Woohoo!!!!! :icon_jook :cool:

ZoomBoy

My Flight Sims Page

- Link to My Blog - Sims and Things - DCS Stuff++

- Up-to-Speed Guides to the old Lockon A10A and Su-25T

- Some missions [needs update]

  • ED Team
Posted

Thank you. :)

 

Edit:

Oops.

"If you're on RTB - B3B or LDG - NOC modes, it merely gives you Emergency Leveling Mode. "

 

RTB and LDG - are NAV submodes. So if you will press "A" there, the "Route" AUTOPILOT mode will be engaged. :D :D :D

 

BTW:

When these navigational submodes are turned on, autopilot follows your plane to return point, then navigational system automatically switches to LDG mode and autopilot will follow you by glideslope (at least will try to do it). At RALT = 50 m the autopilot will engage "Emeregency Leveling". So you MUST to disengage the autopilot (by "A" key) before this altitude if you wish to land. ;) I hope it will help.

[sIGPIC][/sIGPIC]

 

К чему стадам дары свободы?

Их должно резать или стричь.

Наследство их из рода в роды

Ярмо с гремушками да бич.

Posted

ZoomBoy,

 

Do youknow how to drop all of the iron bombs at the same time on Su-25T?

 

From what I figured, "ПО-1, ПО-2, ПО-3, ВСЕ", works on a pair of bombs at the time only? In other words "ВСЕ" would not release all of the bombs from all pylons at the same time.

Thermaltake Kandalf LCS | Gigabyte GA-X58A-UD3R | Etasis ET750 (850W Max) | i7-920 OC to 4.0 GHz | Gigabyte HD5850 | OCZ Gold 6GB DDR3 2000 | 2 X 30GB OCZ Vertex SSD in RAID 0 | ASUS VW266H 25.5" | LG Blue Ray 10X burner | TIR 5 | Saitek X-52 Pro | Logitech G930 | Saitek Pro flight rudder pedals | Windows 7 Home Premium 64 bit

  • ED Team
Posted

You must to keep trigger depressed until last bomb in ripple was not released.

This switch influences on weapons stations (not bombs) count from wich bombs will be released. I.e. you can not release a single bomb from MBD-67U MER. Only whole station.

[sIGPIC][/sIGPIC]

 

К чему стадам дары свободы?

Их должно резать или стричь.

Наследство их из рода в роды

Ярмо с гремушками да бич.

Posted

Hi Olgerd,

 

If I take just regular iron bombs an all pylons, the most I can release at one time is 2! Even with salvo switch in "ВСЕ" position! For the next two bombs to release, I have to release and depress the key on a keyboard (or a button on a joystick).

 

What I want is to release all iron bombs, from all pylons at one time, with one keyboard or joystick button press. How do I do that? Or is ti possible at all?

 

I tried with space bar, did not work. Then I remapped my joystick, that did not work either?

Thermaltake Kandalf LCS | Gigabyte GA-X58A-UD3R | Etasis ET750 (850W Max) | i7-920 OC to 4.0 GHz | Gigabyte HD5850 | OCZ Gold 6GB DDR3 2000 | 2 X 30GB OCZ Vertex SSD in RAID 0 | ASUS VW266H 25.5" | LG Blue Ray 10X burner | TIR 5 | Saitek X-52 Pro | Logitech G930 | Saitek Pro flight rudder pedals | Windows 7 Home Premium 64 bit

  • ED Team
Posted

May be you have different types of bombs at different stations? The switch works only on currently selected type. Or may be unsimmetrical loading?

 

Edit:

Do you use ripple interval settings?

[sIGPIC][/sIGPIC]

 

К чему стадам дары свободы?

Их должно резать или стричь.

Наследство их из рода в роды

Ярмо с гремушками да бич.

Posted
May be you have different types of bombs at different stations? The switch works only on currently selected type. Or may be unsimmetrical loading?

 

Edit:

Do you use ripple interval settings?

 

YES, you are right! I've just figured it out! Only bombs of the same type will work in this mode!

 

I've just tried it and it works perfectly fine!

 

Thank you!

Thermaltake Kandalf LCS | Gigabyte GA-X58A-UD3R | Etasis ET750 (850W Max) | i7-920 OC to 4.0 GHz | Gigabyte HD5850 | OCZ Gold 6GB DDR3 2000 | 2 X 30GB OCZ Vertex SSD in RAID 0 | ASUS VW266H 25.5" | LG Blue Ray 10X burner | TIR 5 | Saitek X-52 Pro | Logitech G930 | Saitek Pro flight rudder pedals | Windows 7 Home Premium 64 bit

  • ED Team
Posted

Good. :)

  • Like 1

[sIGPIC][/sIGPIC]

 

К чему стадам дары свободы?

Их должно резать или стричь.

Наследство их из рода в роды

Ярмо с гремушками да бич.

Posted
Thank you. :)

 

Edit:

Oops.

"If you're on RTB - B3B or LDG - NOC modes, it merely gives you Emergency Leveling Mode. "

 

RTB and LDG - are NAV submodes. So if you will press "A" there, the "Route" AUTOPILOT mode will be engaged. :D :D :D

 

BTW:

When these navigational submodes are turned on, autopilot follows your plane to return point, then navigational system automatically switches to LDG mode and autopilot will follow you by glideslope (at least will try to do it). At RALT = 50 m the autopilot will engage "Emeregency Leveling". So you MUST to disengage the autopilot (by "A" key) before this altitude if you wish to land. ;) I hope it will help.

 

OK Fixed

ZoomBoy

My Flight Sims Page

- Link to My Blog - Sims and Things - DCS Stuff++

- Up-to-Speed Guides to the old Lockon A10A and Su-25T

- Some missions [needs update]

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...