FOXFIRE TWOONE Posted June 3, 2011 Posted June 3, 2011 Has the procedure changed. I have been doing the TMS right to area mark, then, put tgt pod into stby mode, hit func then 8 to bring mark points show on hud and nothing. Tried switching to mark on CDU, still no go. Yes I have switched from HARS to EGI after alignment. Intel core I9 10900K 3.7 ghz Asrock Z490 Extreme4 G-SKill Ripjaws V 32GB Cooler Master 120m GTX 980 Superclocked Corsair AX850w psu Samsung 1 T M.2 2 X 850 ssd's Sony 48 in HD TV Trackir 5 Hotas Warthog F/A-18C Hornet Grip Logitech Pro Peddles Windows 10 64
FOXFIRE TWOONE Posted June 3, 2011 Author Posted June 3, 2011 Has the procedure changed. I have been doing the TMS right to area mark, then, put tgt pod into stby mode, hit func then 8 to bring mark points show on hud and nothing. Tried switching to mark on CDU, still no go. Yes I have switched from HARS to EGI after alignment. Fixed Low keyboard batterys, means brainless keyboard. Like me. :music_whistling: Intel core I9 10900K 3.7 ghz Asrock Z490 Extreme4 G-SKill Ripjaws V 32GB Cooler Master 120m GTX 980 Superclocked Corsair AX850w psu Samsung 1 T M.2 2 X 850 ssd's Sony 48 in HD TV Trackir 5 Hotas Warthog F/A-18C Hornet Grip Logitech Pro Peddles Windows 10 64
Cibit Posted June 3, 2011 Posted June 3, 2011 Actually I made several mark points today in a mission. but they where changed when I returned my spi to them. They where out to sea? I shall need to investigate furthur in case of human error But I am confident in my abilities:huh: i5 8600k@5.2Ghz, Asus Prime A Z370, 32Gb DDR4 3000, GTX1080 SC, Oculus Rift CV1, Modded TM Warthog Modded X52 Collective, Jetseat, W10 Pro 64 [sIGPIC][/sIGPIC] Adding JTAC Guide //My Vid's//229th AHB
Nate--IRL-- Posted June 3, 2011 Posted June 3, 2011 Actually I made several mark points today in a mission. but they where changed when I returned my spi to them. They where out to sea? I shall need to investigate furthur in case of human error But I am confident in my abilities:huh: Very odd, if you manage to get a quick track of this I'd like to take a look. Nate Ka-50 AutoPilot/stabilisation system description and operation by IvanK- Essential Reading
Cibit Posted June 3, 2011 Posted June 3, 2011 Will do Nate, it was a MP environment when it happened off to try again:) i5 8600k@5.2Ghz, Asus Prime A Z370, 32Gb DDR4 3000, GTX1080 SC, Oculus Rift CV1, Modded TM Warthog Modded X52 Collective, Jetseat, W10 Pro 64 [sIGPIC][/sIGPIC] Adding JTAC Guide //My Vid's//229th AHB
Cibit Posted June 4, 2011 Posted June 4, 2011 (edited) Just retried markpoints. They are off:cry: TRK attached hope I am not being noobish;) Also have you come across any MP issues where the clients with rampstart has no fuel? Its happened to me twice now whilst hosting Cheers Cib Edited June 4, 2011 by Cibit i5 8600k@5.2Ghz, Asus Prime A Z370, 32Gb DDR4 3000, GTX1080 SC, Oculus Rift CV1, Modded TM Warthog Modded X52 Collective, Jetseat, W10 Pro 64 [sIGPIC][/sIGPIC] Adding JTAC Guide //My Vid's//229th AHB
Nate--IRL-- Posted June 4, 2011 Posted June 4, 2011 Thanks I'll take a look. Nate Ka-50 AutoPilot/stabilisation system description and operation by IvanK- Essential Reading
Nate--IRL-- Posted June 4, 2011 Posted June 4, 2011 OK this is odd, Watching your track I see the MP are off, when I take control and do some MPs they are fine. I don't understand why. Nate Ka-50 AutoPilot/stabilisation system description and operation by IvanK- Essential Reading
nemises Posted June 4, 2011 Posted June 4, 2011 elevation / slant angle issue?...are marks calculated using an absolute position, or a relative ray cast ?
Kaiza Posted June 4, 2011 Posted June 4, 2011 Just retried markpoints. They are off:cry: TRK attached hope I am not being noobish;) Also have you come across any MP issues where the clients with rampstart has no fuel? Its happened to me twice now whilst hosting Cheers Cib I just had a quick look mate. It is because you are selecting your CDU on your right MFD before you make the mark point. When you do this the TAD becomes SOI and you are creating a mark point where your TAD cursor is rather than your TGP point. Leave TGP as SOI and try then it will work fine. :thumbup: 2 [url=http://www.aef-hq.com.au/aef4/forumdisplay.php?262-Digital-Combat-Simulator][SIGPIC]http://img856.imageshack.us/img856/2500/a10161sqnsignitureedite.png[/SIGPIC][/url]
Cibit Posted June 4, 2011 Posted June 4, 2011 Thanks for taking the trouble, I am glad it was not a bug:) Rusty procedures. Back to flight skool:doh: i5 8600k@5.2Ghz, Asus Prime A Z370, 32Gb DDR4 3000, GTX1080 SC, Oculus Rift CV1, Modded TM Warthog Modded X52 Collective, Jetseat, W10 Pro 64 [sIGPIC][/sIGPIC] Adding JTAC Guide //My Vid's//229th AHB
Nate--IRL-- Posted June 4, 2011 Posted June 4, 2011 I just had a quick look mate. It is because you are selecting your CDU on your right MFD before you make the mark point. When you do this the TAD becomes SOI and you are creating a mark point where your TAD cursor is rather than your TGP point. Leave TGP as SOI and try then it will work fine. :thumbup: Ah I should have spotted that, I feel silly now. Nate Ka-50 AutoPilot/stabilisation system description and operation by IvanK- Essential Reading
Kaiza Posted June 4, 2011 Posted June 4, 2011 No prob Cib. You've solved over 4000 issues for people Nate its OK to let the odd one go. :smilewink: [url=http://www.aef-hq.com.au/aef4/forumdisplay.php?262-Digital-Combat-Simulator][SIGPIC]http://img856.imageshack.us/img856/2500/a10161sqnsignitureedite.png[/SIGPIC][/url]
Recommended Posts