Jump to content

Recommended Posts

Posted

hello -

 

new hotas here... my gbu laser guided bombs not tracking in ccrp even though i have auto lase on with lase duration of 10seconds... any ideas?

 

wondering if i have to use nosewheel for some reason.. please advise.

ASUS Tuf Gaming Pro x570 / AMD Ryzen 7 5800X @ 3.8 / XFX Radeon 6900 XT / 64 GB DDR4 3200 

"This was not in the Manual I did not read", cried the Noob" - BMBM, WWIIOL

Posted

I'm trying to remember if auto-lase works even if you don't have the laser set to latch in the TGP. Could that be it. I always set it to latch anyway.

Corsair Graphite 780T / ASUS Maximus VIII Hero / i7-6700K@4.5GHz / Corsair H110i / 32GB DDR4 PC-2666 / ASUS 1080 Strix / EVGA 850 Pro / Samsung 950 Pro M.2 SSD / Win10x64 / Samsung UN48JU7500 4k / Logitech G910/933 KB/Headphones / Razer Naga Epic Mouse / MFG Crosswinds / TM HOTAS Warthog / HTC Vive

Posted

Is the TGP the SPI? you might be Lasing the Steerpoint rather than the target perhaps......

VIPER

 

161 SQN AEF

 

----------------------------------------------------------------------------

 

 

Intel i7 7700X

Corsair H70 Cooler

Corsair DDR4 RAM 32 GB 2400mhz

2x Corsair Hydro GeForce GTX 1080 Ti SLI

Samsung 970 EVO NVMe 1TB

1200 watt Corsair PSU

ASUS 299 TUF MK II Mainboard

Corsair 800D Obsidian case

Posted
my gbu laser guided bombs not tracking in ccrp even though i have auto lase on with lase duration of 10seconds... any ideas?

Sounds how it should be done. When I was new to this I selected the weapons in the DSMS with the OSBs and then edited the profile directly, but that is only temporary and when you deselect the weapon the profile is gone. Always go with the profile page and choose the right weapon profile there. But maybe you're already doing this.
Posted

Here's my question, you have auto lase set to 10 seconds, what's your weapon's flight time to target? If it's more than 10 seconds, then the laser shuts off before the bomb even gets close and it just starts to wobble. Try setting auto lase to 20 or 25 seconds and repeat the attack run. Just a thought.

Why is the rum always gone!?!?!?!

Posted
Here's my question, you have auto lase set to 10 seconds, what's your weapon's flight time to target? If it's more than 10 seconds, then the laser shuts off before the bomb even gets close and it just starts to wobble. Try setting auto lase to 20 or 25 seconds and repeat the attack run. Just a thought.

 

Lase time is "time to target", not "time from deployment". A 10 second lase time means the laser activates 10 seconds before impact. If you set your lase time too long, you increase your chances of falling short of the target, as the LGB will try to fly a flat trajectory to it, losing energy along the way.

dcs_sig.jpg

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...