Jump to content

Recommended Posts

Posted

when i boot up a mission, my joystick and keybord don't seem to do anything, but i can hit escape and pull up the menue.

 

Anyone know why my controls won't work???

DCS: F-4E really needs to be a thing!!!!!!

 

 

Aircraft: A-10C, Ka-50, UH-1H, MiG-21, F-15C, Su-27, MiG-29, A-10A, Su-25, Su-25T, TF-51

Posted

Check your controller settings in the option section.

Select an aircraft and the axis-tab. Check if your controllers are mapped correctly.

Some missions start with the active-pause activated (pause symbol in the upright corner) hit the pause key to unpause.

Did you select a mission where you're flying an aircraft which you actually activated (purchased)? You can select those aircrafts but you won't be able to fly them.

 

Did this problem occur before 1.2.7?

Posted

What sort of stick you using? Probably an unimportant question, but you never know. Also another simple one, do you have it plugged in before you actually launch the mission? That seems to happen to me sometimes out of stupidity :D

This post is protected by a pilot who has a serious lack of negotiating skills, but is absolute hell in a dogfight. If you do not belong here, please leave.

 

You have now been properly negotiated with.

 

MiG-29S Instant Action Mission Fix

Come check out and add to my list of all landmarks in DCS World!

^that works now

Posted
What sort of stick you using? Probably an unimportant question, but you never know. Also another simple one, do you have it plugged in before you actually launch the mission? That seems to happen to me sometimes out of stupidity :D

 

 

a saitek cyborg evo

 

 

 

and i selected instant action for the A-10C (which was the first thing that i bought) but the problem goes away if i start a mission with me not flying, and then take control of an aircraft

DCS: F-4E really needs to be a thing!!!!!!

 

 

Aircraft: A-10C, Ka-50, UH-1H, MiG-21, F-15C, Su-27, MiG-29, A-10A, Su-25, Su-25T, TF-51

Posted
Check your controller settings in the option section.

Did this problem occur before 1.2.7?

 

For me, yes! Once in awhile, and truly random, when I open World, go to the controller settings, I find all columns blank. I simply reload my files and everything comes back and works again.

 

Now, each time I open World, I go to controller settings and double check. So far, after the initial upgrade of 1.2.7, they're there every time.

Acer AMD Phenom II x 4 840T, 16 gb. memory, Zotac GTX580 Amp2 3GB, 40" Philips tv, Thrustmaster HOTAS Warthog, Saitek Combat Rudders , Cougar MFCD's w/ 21.5" LG monitor, DSD Track Master button box, 3rd. century Roman field comanders helmet w/ Track IR 5, Windows 7 Home P.

 

“God is a comedian, playing to an audience that's afraid to laugh.”... Voltaire

 

"Diplomacy is the practiced art of being able to confidently say 'nice doggie' until you find a rock" ... Tom Clancy

Posted (edited)

Having same issue, been a long time user and never seen this one. Simply cannot do anything in sim but press esc and click with mouse.... Checked controls all are still there and responding in the options menu, so not sure whats goin on, tried running as Admin, didnt help, any ideas? 1.2.7.23097

 

 

This is a show stopper, literally cannot use the sim in any way shape or form, have exhausted all my Ideas..... ED pls help

Edited by willzah1313
Posted (edited)

Bump! starting to have a big ol WTF about this guys, ANYTHING? Still will not work what so ever..... Tried deleting all the controls in \Users\*\Saved Games\DCS\Config\Input no luck, still only mouse and ONE key works which is ESC. Cant change views, cant fly, cant do ANYTHING, except exit.... a re-install is not an option, my internet is not able to DL the 12+GB again.... HELP!

Edited by willzah1313
Posted

Found a workaround, updated the BETA and its works controls and all, so my question, WHY didnt it work in the normal update, and does it matter that the Beta is now the non beta?

Posted

My game just suddenly started working again. I have no clue what happened or what changed, it just started working

DCS: F-4E really needs to be a thing!!!!!!

 

 

Aircraft: A-10C, Ka-50, UH-1H, MiG-21, F-15C, Su-27, MiG-29, A-10A, Su-25, Su-25T, TF-51

Posted (edited)

Hello, I have the same problem, my controls work fine (axis tune, buttons, etc) while in the options, but when I start the sim everything stops working, no keyboard or joystick input at all, except ESC. I can only use the mouse.

If I click Adjust Controls in game, nothing happens and I'm forced to close the game.

Trying to download and re-install the whole DCS World ATM, hopefully that fixes it.

 

I'm using a Thrustmaster Warthog and ver. 1.2.7.23097

 

It's really game breaking for me, and I was just about to buy FC3 too..

 

edit: fixed after re-installing

Edited by Cloudie
Posted (edited)

I am not able to save any changes to my MFD Cougar button setups. It always saves (after several clicks on the OK button) a file with the following content only in <user>\saved games\DCS\config\input\a10c\joystick\f16 mfd 1...lua:

 

function layout()

return {

forceFeedback = {

Yep, the file seems to be truncated and any changes are not saved.

Keyboard and Thrustmaster Warthog joystick+throttle files seem to work, though. Very weird.

 

Edit:

 

It seems that I'm having this problem: http://forums.eagle.ru/showthread.php?t=118251

It is also discussed here: http://forums.eagle.ru/showthread.php?t=119755

 

Any solutions to it yet? Is it related to the problems of the other posters above?

Edited by RedX

Intel Core i7 9700K@4.6GHz|ASUS Strix Z390-H|G.Skill DDR4 32GB@3200MHz|MSI GeForce RTX 2080 Ti|2xSSD 500GB Samsung 970 EVO M.2 RAID0|SSD Samsung 850 EVO|Corsair HX 750W|Fractal Design Define R6 Blackout|UWQHD 34"|Valve Index|Logitech G9|MS Natural Ergonomic Keyboard 4000|VPC WarBRD Base+MongoosT-50CM2 Grip|VPC MongoosT-50 Throttle|VKB T-Rudder|Beyerdynamic DT770|Boom mic|Windows 10 Home

Posted
Found a workaround, updated the BETA and its works controls and all, so my question, WHY didnt it work in the normal update, and does it matter that the Beta is now the non beta?

 

I'm having the same issue. Nothing responds while flying. I'm running the newest version (1.2.7 I guess) on steam. How can I update the BETA?

Thank's

Posted

SOLVED

 

Guys, I contacted DCS support, and they solved my issue (imputs not responding, only esc key works).

 

For anyone ho's facing this issue: Go on instalation folder (either "Eagle Dynamics/DCS World" for convencional version, or "SteamApps/common/DCSWorld/" for Steam version) look for Scripts/Imput, and delet Imput.lua file. I recommend to backup this fale first, in case removing it doesn't work.

 

Now, enjoy the game :pilotfly:

  • ED Team
Posted

I suggest you to try

Steam Library: DCS World -> Properties -> Local Files -> Verify integrity of game cache...

 

The problem seems to do with how Steam deletes obsolete files.

Dmitry S. Baikov @ Eagle Dynamics

LockOn FC2 Soundtrack Remastered out NOW everywhere - https://band.link/LockOnFC2.

  • ED Team
Posted

Nope. Steam deletes the file when updating to 1.2.7 as it should.

How this file happened to appear, or managed to stay in your game folder once again ...

Dmitry S. Baikov @ Eagle Dynamics

LockOn FC2 Soundtrack Remastered out NOW everywhere - https://band.link/LockOnFC2.

Posted
Nope. Steam deletes the file when updating to 1.2.7 as it should.

How this file happened to appear, or managed to stay in your game folder once again ...

 

My problem was solved, and i had verifyed my game cache, and it didn't work. Anyway, by removing that file, i can now enjoy this game.

 

Thank's

Posted

I have the same problem after updating to 1.2.7. All the aircraft controls on the joystick and keyboard do not work, except esc. And when I try "adjust control" in the pause menu, the game hangs. I will try deleting Input.lua, and will let you the result.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...