Mordants

Whilst I realise profiles are mainly set for personal preference for the kit you have, it might be worth attaching your profile so we can have a play around with it. Looks like you have a great setup.

I hope so, because I just won the F14A & B in a competition tonight and I'll need all the help I can get. I normally fly the Mi-8 so shows where I am in the plot lol.

I was watching Rossmum last night on Twitch and his settings looked rock solid when he looked in the cockpit and elsewhere. It reminded me of your problem. He said he ensures “precision“ is enabled, slows the movement a little but may help. I don’t have access to my computer to check it out at the moment but perhaps it might help you before you spend anymore.

When I wanted to do what you want without any hassles I found RSMapper on here and saves all that LUA faff. Program any single action key to on/off however you like, and more. Youtube also has a hoe to guide if needed.

Hi thanks for the reply, but I'm all sorted now. I had an issue with the export lua file, needed to changw a couple of lines around.

Hi Here are my before and after Export.lua files from Saved Games>DCS openbeta> Scripts. Simshaker lines had to be top. hope it helps. Original Export.lua Export.lua

See attached Cold War 1947 - 1991.pdf

Hi I've just seen this after I'd shut down the games computer, I'll dig out the files tomorrow and get back to you. Though to honest it was only 4 or 5 lines i had to juggle with.

Bugger, I've only just managed to source, sort and collate 59 pages of the last briefings so I can follow the missions Rossmum plays, and that's only if he lets slip which mission it actually is. I'm not quiet there just yet at automatically guessing which one he is on.

Hi I had a similar problem to many USB's not enough sockets. I used a SupaGeek PCI-E to Type C (1), Type A (4) USB 3.0 5-Port PCI Express Expansion Card from Amazon and a similar one with 5 USB outlets plugged straight into the motherboard, no problems and dead easy. I am slightly suspicious of multi port desk top hubs , hence the PCI route. Regards button mappings, if your talking Joystick then RSmapper is well useful, I did a search and found on here, there are also YOUTUBE vids on how to set it up. Hope that helps.

Hi All I have now sorted my snags with SimShaker for Aviators. In the scripts folder of saved games for my version of DCS Beta is an export lua, this contained a couple of lines for my Streamdeck along with a couple of lines from SSA. A little bit of shuffling around with the strings trying to find an order that would enable both systems to work proved fruitful. Disconnecting the 3.5mm audio plugs from the Jetpad now also gave me full control via the USB connector in the SSA program, no longer needing the Sound Intercept mode The second problem was with with .NET framework producing errors, this was solved by basically carring out a scan check via the command line then un checking .NET framework in Windows features, restarting the computer and re- installing it. I did a re boot to make sure and it seemed to behave. The gametrix controller now shows a satisfactory green light. Hopefully this helps anyone else out there. Many thanks to the generous people out there who chipped in to help with the initial snags I was having. Regards

In my inbox earlier from The SystemActive team We were going to wait until we knew the units had been shipped from Factory on Friday 13th before we gave an update as we have been misinformed a number of times before. However, we have received so many calls and emails in the last two days that we decided to put this out there and update again on Friday. For enquiries about pre-orders before September 24th "HP Press Release September 24th, 2020 Customers who have already pre-ordered the HP Reverb can expect to receive their shipments this fall, starting in early November 2020. Pre-orders are expected to be prioritized for the time/date the order was made to our channel partners. We had a meeting with HP today (November 10th, 2020) and were told shipment from factory to the UK of first pre-orders will begin November 13th , 2020. Once we have proof units have left the factory for shipment to the UK we will provide our customers with an update on numbers and date of delivery to them. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- For enquiries about pre-orders after September 24th "HP Press Release September 24th, 2020 "Demand has been high so all pre-orders made starting today, September 24will start arriving to customers from channel partners in early December." HP has not given us any further updates regarding pre-orders made after September 24th. Thank you for your patience. If you have any other questions or wish to contact us please email reverb@systemactive.com The SystemActive team

Hi Check out Charles Tytler videos on You tube Search for Image State Change (Lamp Illumination) - DCS Interface for Streamdeck His vids are very comprehensive.

Late update regarding this problem, I had a chance to jump on my computer.: It suddenly occurred to me to compare my DCS saved games script settings for the stable version and the beta version. Lo and behold slightly different folder structure in the DCS folder compared to the Beta version. So I ran the stable DCS version and SSA and there to my surprise was the Aircraft I was flying see attached pic. The question is since I play the Beta version 99.9% of the time how do I get the right folder structure into the beta version script file in my saved games folder. Would it be a matter of copying and pasting the relevant missing files, or deleting the DCS stable version in the saved games folder and re-installing SSA so it only sees one DCS folder i.e. the Beta version. Any thoughts?

Hi No, nothing apart from an order acknowledgement at the moment. I can wait.

Co-incidentally I ordered mine from there earlier this afternoon. That was the only site I found too. https://systemactive.co.uk/online/hp-reverb-g2/

Hi everyone, I originally posted this in [Official] SimShaker for Aviators, but me thinks this forum might be the one for my snag below, basically PC sound output works and things vibrate and also under test but no communication with DCS. i.e. it doesn't show the aircraft i'm running, tried loads of different ones. Seems to be a comms problem between DCS and Aviators software, anyone have any idea. Apologies if this is the wrong forum. I deleted this similar question earlier thought it might be the wrong place to post. (Ah so many insecurities) I dont want to upset anyone. My Jetseat arrived Last Friday 7th Nov 2020, which I am using for DCS. I am having a problem with the Jetseat set up. Whilst the seat connects via the USB it will not operate in that mode. I have to connect the 3.5mm audio jacks and also switch the mode button on the controller to show red which I believe to be the Sound intercept mode. I followed the instructions below Assembly and Installation Instructions Attach the JetSeat to a chair using straps Connect the JetSeat control unit by means of DIN connectors Connect the AC/DC power adapter to the JetSeat and AC network Set JetSeat On/Off switch to ON Download and install Gametrix JetSeat Control Panel and Massage applications Connect JetSeat USB connector into a PC USB port. Sound Intercept mode You can use JetSeat in its Sound Intercept mode with any game (not only PC game but actually at any device with 3.5 mm sound output). Plug JetSeat's 3.5 mm male jack into your device sound output (as if it was a Buttkicker amplifier), plug a headset or speakers into JetSeat's 3.5 mm female jack, press and hold MODE button at JetSeat's control unit for 3 seconds. LED color changes. Wait about 10 seconds for changes to take effect. That's it. Further steps: adjust vibration level by rotating a big black dial at the control unit or via JetSeat Control Panel App. Disappointingly I am also unable to detect any DCS aircraft in the Simshaker application, download is the beta version 2.1.4.0 (I had earlier tried the stable version with the same result) I just see the generic Jet Engine, Helicopter and Piston options. I also have installed NET Framework 4.8 I have an email trail with Andre but no progress so far. Additionally the kit passes the test modes with all sensors vibrating. I’m hoping you smart guys/gals out there might be able to help me find a solution. Found my Solution: Hi All I have now sorted my snags with SimShaker for Aviators. In the scripts folder of saved games for my version of DCS Beta is an export lua, this contained a couple of lines for my Streamdeck along with a couple of lines from SSA. A little bit of shuffling around with the strings trying to find an order that would enable both systems to work proved fruitful. Disconnecting the 3.5mm audio plugs from the Jetpad now also gave me full control via the USB connector in the SSA program, no longer needing the Sound Intercept mode The second problem was with with .NET framework producing errors, this was solved by basically carring out a scan check via the command line then un checking .NET framework in Windows features, restarting the computer and re- installing it. I did a re boot to make sure and it seemed to behave. The gametrix controller now shows a satisfactory green light. Hopefully this helps anyone else out there. Many thanks to the generous people out there who chipped in to help with the initial snags I was having. Regards

Hey no problems and no need to apologise all answers gratefully received.

Hi thanks for the reply. Test mode works within the software, everything checks out when self testing, just not from the game, with no current aircraft from the game. I won't be able to get back on this computer now till tomorrow night (wife works from home on here) but any further help is welcome. Cheers.

Hi, i just done that test and the situation remains the same, I did check with the aircraft I own AV8B, FA-18, A10 and MI-8 and Huey. still no result. Also removed the 3.5mm audio jacks and left in USB, closed the Jetseat control panel. No vibrations from the device. plugged the jacks back in reset the mode button so it turned red and the vibrations returned albeit generic. Thanks for your continuing help and please don't apologise, your helping me.

Hi Thanks for your reply beta version 2.1.4.0 "Disappointingly I am also unable to detect any DCS aircraft in the Simshaker application, download is the beta version 2.1.4.0 (I had earlier tried the stable version with the same result) I just see the generic Jet Engine, Helicopter and Piston options".

Hi everyone, My Jetseat arrived Last Friday 7th Nov 2020, which I am using for DCS. I am having a problem with the Jetseat set up. Whilst the seat connects via the USB it will not operate in that mode. I have to connect the 3.5mm audio jacks and also switch the mode button on the controller to show red which I believe to be the Sound intercept mode. I followed the instructions below Assembly and Installation Instructions Attach the JetSeat to a chair using straps Connect the JetSeat control unit by means of DIN connectors Connect the AC/DC power adapter to the JetSeat and AC network Set JetSeat On/Off switch to ON Download and install Gametrix JetSeat Control Panel and Massage applications Connect JetSeat USB connector into a PC USB port. Sound Intercept mode You can use JetSeat in its Sound Intercept mode with any game (not only PC game but actually at any device with 3.5 mm sound output). Plug JetSeat's 3.5 mm male jack into your device sound output (as if it was a Buttkicker amplifier), plug a headset or speakers into JetSeat's 3.5 mm female jack, press and hold MODE button at JetSeat's control unit for 3 seconds. LED color changes. Wait about 10 seconds for changes to take effect. That's it. Further steps: adjust vibration level by rotating a big black dial at the control unit or via JetSeat Control Panel App. Disappointingly I am also unable to detect any DCS aircraft in the Simshaker application, download is the beta version 2.1.4.0 (I had earlier tried the stable version with the same result) I just see the generic Jet Engine, Helicopter and Piston options. I also have installed NET Framework 4.8 I have an email trail with Andre but no progress so far. Additionally the kit passes the test modes with all sensors vibrating. I’m hoping you smart guys/gals out there might be able to help me find a solution.

@jonsky7 Awesome thanks for the "heads up".

Hi Does anyone have the answer to this please, I have searched but thus far unsuccessfully ?

Regarding the Thrustmaster Warthog with Deltasim's Slew mod, which bindings control it? I've found that both the slew mod and adjacent "hat" control the same thing in my AV8B