Gizmondo

Hello Guys, I think it's time to advance on the project,I managed to finish almost all the skins but we need a good 3D modeller to correct bugs and issues with our Model. and another one to create spec textures from the template. any Volunteers??

you're bleedign wayyy too much energy, but good hit for a first

I don't make people pay for something i didn't make

Maybe not the cockpit , but the external model yes

The su-27SM is an upgraded version of the Su-27, the SM3 is the same but built new rather than a mid-life upgrade. the su-27SM2 was initially supposed to reffer to the SU-35 but was not really applied For the MOD, it is not dead we are slowely working ont it and correcting bugs. and we work on the cockpit too but there is an issu because it is based on Bearstudio Su-30 cockpit that we modified, i don't think that we will be able to make it public (question of copyrights) i don't know how it's gonna end-up.

did you turn the control switch on the rear NDB panel to the right??

Yes i did, i found the answer just after my post, but i kept it for those who maybe need the lines

Really thanks man , I've read it and learned a lot I managed to make the Landing/Taxi light 3 positions switch work : original: {down = iCommandPlane_SpotSelect_switch,value_down = 1.0,name = _('Spotlight Switch - LANDING'),category = {_('Systems')}}, {down = iCommandPlane_SpotSelect_switch,value_down = -1.0,name = _('Spotlight Switch - TAXI'),category = {_('Systems')}}, {down = iCommandPlane_SpotSelect_switch,value_down = 0.0,name = _('Spotlight Switch - OFF'),category = {_('Systems')}}, my modifications: {down = iCommandPlane_SpotSelect_switch, up = iCommandPlane_SpotSelect_switch,value_down = 1.0, value_up = 0.0, name = _('Spotlight Switch - LANDING'), category = {_('Systems')}}, {down = iCommandPlane_SpotSelect_switch, up = iCommandPlane_SpotSelect_switch,value_down = -1.0, value_up = 0.0,name = _('Spotlight Switch - TAXI'), category = {_('Systems')}}, -- Landing Gear {down = iCommandPlaneGearUp, up = iCommandPlaneGearDown, value_down = 1, value_up =0, name = _('Landing Gear Handle, Up/Down'),category = {_('Systems')}}, -- Flaps {down = iCommandPlaneFlaps, up = iCommandPlaneFlaps, value_down = 1, value_up = 2, name = _('Flaps Flight Position'), category = {_('Flight Control'), _('Left Console')}}, {down = iCommandPlaneFlaps, up = iCommandPlaneFlaps, value_down = 2, value_up = 5, name = _('Flaps TakeOff Position'), category = {_('Flight Control'), _('Left Console')}}, {down = iCommandPlaneFlaps, up = iCommandPlaneFlaps, value_down = 3, value_up = 2, name = _('Flaps Landing Position'), category = {_('Flight Control'), _('Left Console')}}, -- Auxiliary Switch Panel ---------------------- {down = lights_commands.L39C_Command_BANO_SteadyFlash_EXT,up = lights_commands.L39C_Command_BANO_SteadyFlash_EXT,cockpit_device_id = devices.LIGHTS,value_down = 0.0, value_up = 0.5 ,name = _('Navigation Lights Mode Control Switch - FLICKER'), category = {_('Auxiliary Switch Panel'), _('Only Front Cockpit')}}, {down = lights_commands.L39C_Command_BANO_SteadyFlash_EXT,up = lights_commands.L39C_Command_BANO_SteadyFlash_EXT,cockpit_device_id = devices.LIGHTS,value_down = 1.0, value_up = 0.5 ,name = _('Navigation Lights Mode Control Switch - FIXED LIGHTING'), category = {_('Auxiliary Switch Panel'), _('Only Front Cockpit')}},

Is there a way to assign the 3position flaps buttons in the L-39 to the flaps switch on the WARTHOG??

Sorry guys i have no real updates. i will post if i have news

This is a coverted bearstudio Su-30MK from FSX

Andrey can you tell us more about this :

Yes we gave our Algerian skins to ED to put them in DCS and after months and months they finally did it but they forgot to put the Mig-21bis. We were using Su-27 and Su-33 to replace the Su-30 , this is why they have MKA skins even if they are fictionals. you can see more on our FB page : https://www.facebook.com/pg/vaafdz/photos/?tab=album&album_id=1793563427540083 It's free!

meanwhile @ Иркутский авиационный завод:

PM!

Algeria is not in the blue or red coalition by default when you open the mission editor, you must create a new mission an select the coalitions. BTW, I think it's time for some explanations. In fact there are two Su-30 Models in this subject: 1- The COMBATACE's one with SKATEZILLA working on bringing back and improving the model from 3DS format to EDM, and as you can see ANDREY134 also brought it back from old EDM to new EDM. 2- The VAAF model (virtual Algerian Air Force) by FREEBIRD on wich we are working since weeks, and on wich we still have some issues. I am not a modeller but a skinner,and i was tryin to split my self between the two projects but now with SKATEZILLA on standby for sometime for personal reasons i am dedicating my time on working on the 2nd one, so we will see what's these two parallel projects will lead to. ANYONE WHO CAN BRING SOMETHING TO THIS PROJECT IS WELCOME! (cockpit, flight model.....) my main problem actually is HOW TO MAKE A SPECULAR file from my template/skin file??? some screens of advancement:

It's Not indian I am Algerian , and this is a SU-30MKA (A stands for ALGERIA) -__- I am working on the template , when it is finished i will make the other skins, MKA BLUE, SM VVS, SM VKS, MKM ,MKI etc...

It's Official , Our Algerian Air Force MOD is part OF DCS, THANKS ED TEAM For listening to us

tHE air algerie tail logo is wayyy too big

why not contacting the ADA TEAM, they've already made a good model for the ADA MOD 2.0 http**://w*w*w.*lockon*files*.com/files/file/2147-ada-mod-v2-pour-lock-on-flaming-cliffs-2/

you're welcome false means the file is in your livery folder with your description true means it is somewhere in a compresssed texture folder recognised by the game or in temptextures