v2tec

However, the graphics card is rendering the scene for the rift and for the screen resolution. Is that right - so, if you have a higher screen resolution you should consume more gpu power than on a lower resolution, right too? What is the meaning of the fps with the rift? Because it is very low on my site (nevada map, single player, cold start) only 22 - 25 fps. But when I play without the rift, the fps is much higher and gameplay is fluid.

does the screen resolution (dcs settings page) has anykind of impact on frame rate with an oculus rift or is pixel density the only parameter? If I choose a very low resolution for the game, will the rift still use it's default resolution and the graphics card load will be reduced? I want the best picture with rift but the picture on the screen is not important to me.

Hallo zusammen, wenn ich auf der Nevada Map eine Mission starte, schaue ich mir über die Kartenansicht (F10) den Heimatflughafen an und die ATC Einstellungen für den Funk. Für die Nellis AFB gibt es hier folgende Einträge, 327.000 und 132.55, ... Der erste Eintrag, 327.000 lässt sich in der A10C über VHF nicht einstellen, also verwende ich den zweiten Eintrag. Hier kommt aber keine Kommunikation mit dem Tower zu stande. Sind die Frequenzen falsch, was ist die richtige, gibt es überhaupt eine Kommunikation auf Nellis?

Oh yeah, the good old times - flying the F-16 in falcon 4.0 with the dynamic campaign... almost ten years ago.

Problem fixed - sorry for blaming dcs. Finally it was my internet security software. It blocked the terrain.dll. NTTR is working fine now.

Worauf wird den die normandy map basieren, DCS 1.5 oder 2.0? Ich würde mich ja freuen, wenn die beiden Versionen endlich mal zueinander finden und es nur noch die neue Version 2.x gibt. Dann wäre es möglicherweise auch einfacher Erweiterungen zu entwickeln und Bugs zu fixen. Die vielen Betas und pre-purchase Phasen sind nicht mein Ding.

My ssd harddrive with DCS alpha (nevada map) crashed. So I wasn't able to unregister the product (terrain). Now I reinstalled alpha on a different harddrive. The module manager shows me that the nevada map is installed an registered. But when I start a mission it says "Error Terrain initialization". Strange, because according to the module manager everything was alright... So, I used the module manager to re-activate the product. It says nevada is already activated, but because it didn't work I clicked reactivate. I got a successful confirmation, but when I start a Mission, same problem. What is wrong and how can I fix it? If I do an reactivation it should work. It is totally annyoing having so much trouble for a bought product.

what happens, if I just install DCS 2.0 on a diffrent hard drive but with the same hardware components. Does the DRM know, that this PC is already registered /activated and just allows the installation of all activated modules?

unfortunately, my hard drive with the DCS World installation crashed today (not the windows drive). Is there any chance to free the installation keys and restore the install counter? Maybe I can enter somewhere the activation-keys and the activation-keys are somewhere stored in the registry(?), which is still available.

I would like to use a button for activating fuel pumps left and deactivating fuel pumps left. So far, I have only figured out that function d1096pnilunilcdnilvdnilvpnilvunil toggles the left fuel pumps on or off. All numbers around 1096 have different functions. Does sombody have a list of all available function-ids and their usage? Or maybe the id's for the fuel pumps on and off - if possible? Talking about the alpha version (nevada map) of DCS.

Hi, I would like to upgrade my system by a new board, cpu and ram. Will I have problems running my DCS installation with the new hardware configuration because of the DRM? Should I deactivate the modules first to save my install counter?

That is something I learned these days too. :-( Playing black sea map with 1.5 and NTTR with 2.0 - it's a pity. Hope the black sea map will be ported to 2.x soon, so one installation is sufficient. I am looking forward having the tree collision in the black sea map ;)

Hi, I just started learning the KA-50, coming from the A10C and I would like to use my TM Warthog. I wonder if it is possible to break down all those toggle switches of the KA-50 into single key-commands for activate and deactivate, so I could use specific buttons on the HOTAS to engage or disengage functions. Currently, it depends on the mission design (already in the air or cold start) or the HOTAS status itself if the button is in the correct state. Any ideas? :book: Example from the default.lua: {combos = {{key = 'R'}}, down = iCommandPlane_RouteMode, name = _('Engage/Disengage Route Mode'), category = _('Ins Collective Stick')}, Would be great to have these commands iCommandPlane_RouteModeEngage iCommandPlane_RouteModeDisengage

Wenn ich alle drei DCS World Versionen installiert habe, werden dann je Version auch die Installations-Keys für gekaufte Module verbraucht oder zählt die Installation trotzdem nur 1x, da es der selber Rechner ist (vielleicht wird das über ein Hardware-Token erkannt)?

When I play DCS (A10-C) in 4k resolution, the font size for radio and chat messages are too small and can't be read. The are some articles here about how to change some .lua files to get almost a larger font size. But a) it didn't work for me b) it will be overwritten by updates / patches. Please ED, add an additional font-size option in the game settings menu where players can increase the size manually - or increase the font size automatically, according the screen resolution. Thx in advance.

and by the way, aircraft trim is acutally not working if you use trim buttons on the stick. Had no problems after the firmware update of TM Warthog. Btw: There's a new TARGET GUI version out (at least new for me, didn't check for a year...)

By the way, the trim on the A10C doesn't work anymore. Button animation on the virtual flight stick is visible, but the plane doesn't react. It doesn't work for the open beta since a few releases and now with the latest patch 1.5.4.54596 on the official release it also doesn't work. :( Please fix, it is important and urgent!

Trim on A10C is still not working with thrustmaster warthog :(

patch 1.5.4.54316 Two bugs fixed - one still open. TrackIR is now working fine with the latest patch. Also leaving settings with the ok button doesn't crash (black screen) anymore. However, trim still doesn't work and this is mandatory if u want to flight the A10C smoothly. :(:(:( Another weekend w/o playing the sim...:cry:

I already tried, but then I had a black screen...

Didn't play for a few months but after the latest update I though I give it a try. I recognized following problems: - trim doesn't work anymore. The controls are set correctly and I even see the press-button-animation on the virtual flight stick, but the plane doesn't react. Is there a new button I have to activate now? Plane controls and settings are set correctly as they worked before. - TrackIR left and right view doesn't go straight anymore, it always rolls to the left or right depending where I am looking. I checked my TrackIR settings, but everything is fine. When I turn my head, it only changes the yaw axis without the roll axis, so it must be a problem in DCS added after post from reflected: - pressing ok button on the settings panel results in a black screen. Doesn't matter if changes are made or not. I really hope they fix it soon. I just re-arranged my flight sim stuff (pedals, warthog, trackIR...) ready to play... :cry: update 07-16-2016: version 54866 trim not fixed finally, patch 55584 fixed also the trim problem. No more problems so far...

I guess multiplayers are also splitted into these three versions. That explains why some online servers are almost empty. Any idea what is the best (stable and most players) version for multiplayer? Thx for the explainations so far - would be nice to find some hints in the download description.

Confused about versions 1.5, 1.5 beta, 2.0 alpha After a long time, I had a look in the download section on the DCS website. There are currently three versions of DCS World: - 2.0 alpha - 1.5 - 1.5 beta Is version 1.5 the final version and if yes, why is there an 1.5 beta? If it is not final, why offering an 1.5 version if it is still in beta phase? What about 2.0 alpha. Are there any advantages compared to 1.5 beside the NTTR map? Can I use 2.0 alpha only with the A10C module?

I am playing on a 4k screen (4096x2160) - that's great! However, the font's on the GUI and ingame for chat and the radio menu are very small. Any idea how I can change this? Btw. ED should fix this. There should be an automatic font size increase for high resolutions. thx --- I guess it is not possible to do it manually, because the thread was moved to wishlist...?

Ich würde den Ordner auf die SSD verschieben und auf der alten Platte einen Link auf das Verzeichnis der SSD legen. Das geht unter Windows 7 mit dem Befehl mklink ganz einfach, am besten mal im Internet nach der vollständigen Syntax suchen. So lassen sich übrigens viele Spiele einfach auf eine SSD verschieben, ohne das es mit der Registrierung Probleme gibt.