Crowman

Hi All Quick update on my previous post, I incorrectly posted that the HUD was inop, I was wrong this was due to me not following correct startup procedure. I am currently flying the default quick mission for the NTTR ie the cold-start. I refueled on the deck to full tanks (Invulnerable by the way) I followed the checklist, and so far have managed to taxi out and takeoff without a problem, currently flying around, I have noticed in flight so far, 1:The radar appears totally inop, 2: The aircraft is consuming fuel even though in options its set to Infinite fuel or what ever it is. Apart from that so far so good will update as and when find things.

Hi All Having same problems as mentioned by yourselves also noticed that Hud doesnt seem to be working either. I am able to refuel on ground to 100% then aircraft can be flown ok. Also noticed when spawning cold cockpit is powered even though battery switched off.

Hi All. Sorry if this has already been reported, but I have noticed whilst going through my aircraft since the latest update 1.5.6 27-01-2017, regarding the animation for the prop whilst running at idle a stationary image of the prop keeps flicking in, if I raise the idle speed just slightly all is ok, I dont know if this is a new bug but didnt notice it previously. Hope this is of use.

Hi Guys Looks like the startup bug has knocked out the ignition system as I have noticed Afterburners dont light up either

Hi All Installed the latest update on 1.5 Beta and had the same problem with Mig21 crashing DCS world. After playing about with config folder files etc, I found that in settings under cockpit resolution I changed it from my usual setting of 1024 to 512 and all Mig 21 missions loaded and worked ok, just to confirm it for my self exited back to settings and changed to 512 every frame and it crashed again, back to 512 ok, hope this helps.

Hi Skate cheers for the info great liveries will try your suggestions on the other liveries I have in the collection, I suspect a lot of work ahead

Hi Skate please find screenshots hopefully attached, hope you find them helpful. Keep up the good work and look forward to your advice.

Hi Skate just downloaded your Fury skins and guess what they have the annoying bort codes on

Hi jcbak Sorry for the typo as you pointed out I meant "R shift K"

Hi All. Sorry if this has been reported already in Nevada Map. I've noticed several aircraft suffer from the same issue, that is being unable to zero the altimeters on the ground at mission start they dont seem to be able to go low enough, dont think game error more of aircraft limitation, that could cause problems when flying in IFR conditions, also unable to change to Airfield setting for approach following info from ATC. something to bear in mind when flying through the Nevada Mountains in the dead of night with no NV.

Hi again small correction to last post regarding F-5E kneeboard textures I've noticed that the Mig-21 is also affected by this.

Hi All First of all congratulations to Belsimtek on the brilliant new Aircraft. Next sorry if this has already been posted but so far I have been unable to find any other posts on the matter, namely the standard kneeboard "L Shift K" on my aircraft is not displaying any maps just the aircraft hints pages then the missing textures bmp is on the following pages, mission waypoints are listed as is my aircraft position when I select it, I have checked through the other aircraft installed and they are ok, sorry didnt mention this is on V 2.0.3.55457.89, v 1.5.4 is as ok, your help on this matter would be most appreciated. Keep up the good Work:)

Hi got the same problem in v 2.0.2.52369.64 as of 20/04/2016

Hi all. Hope this is the right place to post this. Since the latest update for DCS 2.0 which is now 2.0.2.52369.64, during setting up of controls etc after update clear out, took the Ka-50 for a flight over Creech and checked out systems including ejection found with immortal setting the rotor blades no longer separate and the roof hatch not opening, first tried this on the ground, then in the air sure enough the aircraft kept flying till ground strike, unchecked immortal in settings with identical mission loaded ejection system is as should be, dont think was present before update hope this helps keep up the good work.

Mission Editor Map DCS World 2 NTTR Hi All Ive been looking through the various posts, so apologies if I missed a posting answering my question which is this. Regarding the Mission editor in the NTTR when the Map level view is selected it shows the maps of the area as would be available to real life pilots (just shows how accurate the NTTR Map is) my question is, are these maps available for viewing outside of the sim and if so where would I find these files and what would be needed to view them. Thanks in advance. Crowman. PS keep up the good work and looking forward to the next update.

Hi Everybody. I made the mistake of updating 1.2 to 1.5 and its anything but stable, still got the problems of the Beta and now cant go back to 1.2 for a stable game my advice from personal experience dont update 1.2 till 1.5 is well sorted. I didnt mind the bugs on testing but not on whats supposed to be a stable version, keep your versions seperate, any advice on reverting back to 1.2 would be appreciated.

Hi All I've also noticed a problem with the tank textures in that if you surrender control of an aircraft with the textures, Right Alt J or what ever it is and the AI takes over the textures change to the default textures, hope this helps.

Hi All. Sorry if this has already been reported but I have noticed on v1.5 of the Huey when a civilian or military skin is selected without hard-points the flares still operate even though the dispensers are not shown. Hope this helps keep up the good work.

Hi all. Don't know if anyone else has reported what I think may be bug on the Dora's weapons, when infinite ammo is selected in options, and 4x sc50 is selected in the load out, when you have dropped all 4 bombs they visually reappear as expected but are then unusable, bomb present lights also don't illuminate, they can be jettisoned as a whole complete with rack though . Sorry if this has already been reported. Keep up the good Work. Cheers.

Mi-8 Cargo release Hi all. Ive also noticed problems with cargo on the Mi-8, I have noticed that the controls for the emergency and tactical release on the collective ie the push buttons stick in when either the keyboard or bound hotas commands are used, yet if you mouse click on them they work as they should pressing and releasing. If either of these are pressed whilst carrying cargo you cant drop it no matter what, with the result that even trashing the cargo and "breaking the cable" you still are attached to it with some amusing results, the helo cannot escape no matter what, give it a go you'll see what I mean! In the mean time found just using cargo Hook and Auto unhook seem to work fine when used on HOTAS, have tried it on the other HELO's and the dont seem affected, hopefully this will shed some light on this snag. If this has already been reported else when then apologies.

Hi Again got to the bottom of the problem with my install had an old mod for Me-109E in mods folder once this was removed DCS started again with update installed, hope this sheds light on anyone else problems found hint in error log.

Latest Update 1.2.15 Hi Guys tearing out whats little is left of my hair, following latest update which supposedly included the Mig 15 I can no longer start DCS world tried all of said updates and repairs no luck I'm well peeved

Latest Update, went to my purchase page and copied my activation code to clipboard and then pasted into DCS World, when activation asked for, now working ok, Seems there is a morale here, don't type activation codes manually, now on with the cool Sim. Thanks all Crowman!!

Quick update, Installed boxed version of A-10C activated OK, tried in DCS world, asked for activation, entered already filled in codes, activated OK though used another activation any suggestions of the BS 2 Problem, have BS 1 Boxed but i bought standalone module

Hi All. I recently bought a new all singing all dancing PC, downloaded latest DCS World and all modules which i had on other PC. played and activated DCS world, no problem, same with P-51, Huey, Combined arms etc. Problems started with BS2 which was bought as complete module, on entering reg key, invalid key warning came up, checked on my account, was correct, so tried same with A-10C which was bought on DVD and integrated into DCS world, same problem, check key in DVD sleeve, was entered correctly, please help as getting well p##*#d off:mad:, by the way the modules that work look and run brilliant:). Installed boxed version, activated no problem, will try to activate module in DCS world next Cheers Crowman