Roger01

Yes, dowloaded yesterday : https://github.com/DCSFlightpanels/dcs-bios Have reinstall again and no change. All modules I have are updated.

Hi! There's a "big" problem with the JF-17 dcs bios module. some specific JF-17 switch/other won't run. Ex : DcsBios::Switch2Pos afterburnSw("AFTERBURN_SW", PIN); <= WORKS! DcsBios::Switch2Pos aaAgSw("AA_AG_SW", PIN); <= DON'T WORKS! DcsBios::Switch2Pos ag1Ag2Sw("AG1_AG2_SW", PIN); <= DON'T WORKS! DcsBios::Switch3Pos masterArmSw("MASTER_ARM_SW", PIN_A, PIN_A); <= WORKS! DcsBios::Switch2Pos phTestSw("PH_TEST_SW", PIN); <= DON'T WORKS! DcsBios::Switch3Pos aarSw("AAR_SW", PIN_A, PIN_B); <= WORKS! DCS bios read correctly the code but switch don't move. Also, Yaw Trim Switch is a 3posSwitch not 2 . I don't have test all function. Just 5/6 for testing. Thanks! :smartass:

Hello, What the AAR and P.H test switch do? I click on that and... nothing happens. What's wrong? I know AAR is air refueling but the switch.. I don"t know. Thanks!

Wow, so fast, thanks again :)

Yeah, thank you!

Hello, The radio part and UFCP data display for the JF-17 is not implemanted yet? Thanks!

*Have added Ace Combat 2 voice sound* :music_whistling:

Vipergear's pots are better than rel4y? because rel4y sell an USB adapter too. But I can make this if I found a manuel to do this (I got some arduino, 3D printer, lot of stuff, just need buy a HALL captor).

Thanks a lot! So, just need to buy 2 fender pots, one for the ANT, et one for remplace part (pcb/"platine" ring?) of the RNG pot? Right? [Edit] Found 3 fender pots near my country. Nice!

Hi! I would like to know where can I buy : > 6000197 Potentiometer Antenna CTS 270XM8508 > 6000196 Potentiometer Range CTS 270S1800 > 6000194 Potentiometer Axe Z CTS 251B15F104B6NB I know TM don't sell it at all now, but where can I found this pots or similar pots? Thanks a lot!:thumbup:

Hi, I need to change my stick mounting grip sleeve, but I think if I do it with a 3D printer, it will be too fragile (brittle). Any idea where I can buy the part in metal? Thank you!

Can't reproduce.. So if I get this bug again, I post here the replay.

I think the question is the push button t3 in irl jf17 is : - push = airbrake on / release = off Or - push = airbrake on or off depend on eta of the airbrake / release = nothing

Thanks a lot. It's help me a lot, but I need to make some tests and draw a diagram because it's pretty confuse for me again. I see that's not so hard, but my brain is ****ed by this thing.

OK but what's the active wpt? If I tape DEST 40 on the ufcp so wpt 40 is my active wpt if no sensors is active no? (just in this case) Or wpt 40 becomes the last active wpt (ex. Wpt 3 if I tape wpt 3 before 40 on ufcp) Sorry if it's a stupid question but my mind is confused.

If nothing is designated (push tdc radar, sensors etc..), wpt 40 is erased? Wpt 40 becomes the active wtp at this moment so? With a fast test there's 2/3 days, I notice that wpt 40 change if I change AA mode with a tdc lock to a ag mode. But wpt 40 is not erased, it just change for another contact point but I don't know what.

So, sensors/missiles like c802 can slave any wpt (0 to 59 (max?)) if I select one of these wpt on ufcp? Wpt 40 just use for "copy" a t5 push with an active (soi) sensor?

[!!!!!!] AG radar flashing issue (No more separated thread please) :music_whistling:

I could be wrong but I don't think they use an absolute axis with a knob who auto return to 0. Otherwise they are forced to keep their finger on the knob in a specific position all the time to have the "good" antenna height ...

Anyone knows exactly when sounds start? Altitude : too close to the ground/sea AoA : too hard angle Bingo : Bingo fuel (easy :D ) DANGER : ? don't know Fuel : fuel very low I think? LandingGear : forget to up the landing gear Lock : ? Missile : ? Pullup : ? Speed : ? Tracking : Lock by a radar? WARNING : general warning (flash red button) YawRate : Yaw too fast? Thanks a lot!

Ha yes, mech anime, good idea! I look for this direction. :thumbup:

So SPJ is useless?

Same here, sometimes I get this bug. With a lock (double T5 click) The radar sometimes has a visual bug AND I can't change the SOI on other MFD. Need to hit A/A master mode again like witness_me.

[Edit] Won't work with camera zoom too. Yep, I know it's not a "bug" but I think it's important to make this option because my joystick I use for moving the TDC has no program like TARGET to use with it. Using axis like a key is pretty laggy... (slow, not smooth) And so If I use an absolute axis (like a normal knob), if I zoom with the pod (to the max for exemple) and I want to use the camera of a missile on another MFD, the zoom of this missile change immediately at the axis position to the max... because knob was to the max. With a "retourn to 0" knob, don't have this problem. How is the knob used on the real hotas? It's not easy to use like this.

Problem : With potar button (like the Z axis on some sticks) I can't use it for the T6_Axis: Antenna Elevation. Indeed, if I move the cursor, the antenna cursor will move just as much. BUT it will necessarily return to 0, since the button returns to 0, like this : Solution : Make an option who ignores the return of the joystick to the 0 of the axis. An exemple : I turn Z axis to the right = Antenna up to X % (for exemple 50%) Return to 0 = Antenna stays at 50% If I turn the Z axe in the other direction = Antenna down at 25% or -30% (or anyway). The more I turn the stick on the axe, et the faster the antenna up/down... Like the zoom! Camera zoom of the missiles/pods works like this with the Z axis. ( except for the zoom speed) Thanks!