SandMan23

All of my countermeasures are released in succession until empty regardless of ALE-47 program settings. e.g. Set each program (1-5) to release 1 chaff and 1 flare, and still dispenses all until empty. This did not occur prior to the most recent update. I was able to set programs, then manual and release countermeasures per the program settings. Has something changed in this update that requires a different process? Thanks,

Any idea of a timeline for NVG implementation? Would be nice to be able to perform night ops in the Hornet. Thanks,

Obviously not major. Just noticed that the upper left handhold is missing the securing bolts and nuts as compared to the right one.

I have a mission set up with 9 waypoints. When manually cycling through then using HSI up / down arrow buttons the waypoint counter continues to 10, 11, 12, 13 ……past 9 and so on instead of recycling to way point 1. Is this correct, or am I missing something?

I have had the same issue with BALT in autopilot. Found if you are within pitch limits for BALT - push the stick forward slight after pressing BALT (hold for a couple of secs) you will get the : next BALT and it will be activated. Not very scientific....but is has been a trend I have noticed that works. Maybe a bug, or user error - not sure yet

Caucus flying yesterday with vapor effects - then later in the evening and today gone...…...nothing. No matter how many Gs I pull. No changes...same weather, missions, etc. Anyone else experiencing this phenomenon?

So...…...what is the bloody hold up?

As far as age goes, I look to be leading the pack thus far at 53. I am off work this week so Wed - Sun to bask in the Hornet glory!!

Yep - it is an acknowledge issue in the change log for today's update

Ran repair and corrected the issue

No longer have the ability to load AIM 9s to A10C after 5.23.18 update

Thought that F/A 18C release date is 5.30 not this Friday 5.25

I have it mapped to my hotas - cannot visually see the handle to tell if it is engaged or not is the issue.

Given the lighting in the cockpits (darkness), and with the loss of the working flashlight, it is almost impossible to see the Harrier parking break handle. Would it be possible to add a highlight (e.g. yellow) across the top edge of the handle to make it visible in the cockpit. Noting too outlandish - just a subtle identifier?

When performing light test during start up routine, noticed the following: 1 - Battery on 2 - LTS Test switch depressed 3 - All warning lights illuminate 4 - B*tching Betty announces Warning (Right Warning Panel - as occurs with APU start) 5 - Release LTS Test switch 6 - B*itching Betty continues to announce right panel warning with Warning Light, Flaps, JPTL, EFC and Gen lights flashing on right warning panel (As it would occur with APU start) 7 - Clear right panel warning light. B*tching Betty stops, right Warning Light goes out, but Flaps, JPTL, EFC and Gen warning lights remain lit. Then upon APU start, do not receive the right normal right warning light and annunciation. Seems to me that the LTS Test should illuminate all warning lights and B*tching Betty warnings, but all should cease and go out after LTS Test switch release, and you should still receive the normal right panel warning lights and annunciation following APU start. Unless I am missing something here.

I am experiencing the bug and do not have any mods enabled.

Still dealing with bugs / breaks in Harrier from last weeks update. Ugh.

I have run both clean up and repair. Will work in one mission then not the next. Not consistent. This has to be a bug. 6 months in on a module without consistent basic weapons capability. Mavericks were broken. Last update fixes Mavericks and breaks Sidearm, and still not armament panel ripple and interval capabilities. I think that more than enough time has elapsed since launch to have the basic items addressed in a ground attack aircraft. Please get this stuff fixed.

The gunsight pipper range ring is not functioning

Agreed - conflict with the GAU pod and SA. Was able to fire SA's without gun pod, but could not select SA from the MPCD. Could only select with the Armament panel.

Ran repair as well. No change. Still experiencing issue.

Thanks for the reply Tom, but the issue is not a case of being unfamiliar with the module. I have been flying the module since release. When I select the SA from the MFDP as I have always done, the cannon fires despite having Sidearm HUD symbol, tone and lock. - Selecting GUN twice in Store or RWR - brings up SA. I get the SA HUD symbol, tone and lock with the sidearm - but the cannon fires when attempting to launch. Thanks

Same issue here. Seems of late more is getting broken than fixed with each update. I spend more time combing through forums for solutions or discovering there isn't one, and then waiting for the next update, mostly 2 weeks at a clip, hoping it will correct the problem than I do flying these days. Apologies, just a little frustrating.

No response from ground crew when select comms option to store the boarding ladder following 2.5.1 update

No Updates this week? 1.19.18 No updates scheduled for 1.5 or 2.2?