emc

I use LGS to assign keys... DCS can't allow me... anyway it is working I mainly use in Ka-50 for PVI-800 and datalink in my modes

How about, assign WASD to joystick and try use it in notepad, same ghosting? My working grate in Ka-50 and FA-18: take a look G13 in my modes

You are 100% Right! I never expected BS2 to get new texture/model and features. I'm relative new to DCS (from beginning of 2018 ) and BS2 was first module, I'm in DCS World because it (found some post on quora). I can only imagine how others player feel happy to get updated after all years (form 2011), because I own it only 2 years and as I mention never expected to get so massive update. I don't understand why anybody complain about it... I'm sorry that you guys @Wags/@NineLine needed to explain it so exactly (money-wise and work-wise etc.) at the and we see only tip of iceberg, I expected since 2011 DCS changed a lot internally so free update of BS2 model/texture will cause massive internal BS3 changes anyway... somebody has to do it... it so obvious... Anyway @Wags/@NineLine love ya', keep up, never give up... I will buy BS3 at day zero!

I just bought F-14... know nothing about it... is pretty hard, all system and avionics... right now I jus do really basic stuff do not know what put at which switch in X-56.... But I'm loving it!

yes, I saw manual but I didn't get it what it means, but you are correct just single press will trigger whole sequence. And yes 3rd line isn't necessary. Once again thx :thumbup:

I try with delay but I didn't know I need check macro box! I was wonder what it really do? Can you explain in few words? https://imgur.com/eotRokM Anyway this do the trick! THX

Hi @Hollywood_315 I update to latest version and try import new changes for AIRIO but I got msgbox with: Error loading profile data [Ther is an eror in XML document (1,1).] Data at the root level in invalid. Line1, position 1. So I try installation of vaicom from scratch. But now main vaicom profile is completly empty. I can't acces to configuration window to master reset. How can it wipe everything and do clean install.... EDIT: I remove viaocom form export.lua and etc. and vorm VA folder, clean-up/repair DCS but still I see icons in main window of DCS

Hi, Recently I was tuning my setup of X56 Saitech/Logitech to be as useful as possible. I would like to use SCROLL wheel (on far left throttle), right now I use K1 button for it (Num * and Num /) But every turn of scroll cause key press / key release events immediately it works nicely with Weapon system mode selector (LAlt+F and LCtrl+F), but with slow zoom in/out when you have to hold button to do action, SCROLL is just to quick... I try few settings suggested by froogle in great but can not force SCROLL to hold the button. I try use Rotary 1 and 2 but soon I move out of center it zoom in or out till the and of scale and later on it gets crazy never settle down always sent Num * or Num / in any position. Here is my profile: https://www.digitalcombatsimulator.com/en/files/3307445/

Yeah maybe but due to driver error G13 didn't show up in DCS settings. And even now when I fix it it is only JOYBTN1 available in G13 column. Anyway... it is working via LGS...

Yes everything working fine. Solution is: turn off Core Isolation Memory Integrity as suggested here: after reboot driver was running fine!

Hi all G13 users I need you help regarding Logitech G13 and thread I bought used G13 and I can't get it working... Feel dumb, how difficult can be configure G13. I assign keystroke to keys, assign profile to dcs.exe file and make profile active, but nothing happens when I hit keys. Then I discover problem with Logitech Gaming Virtual Bus Enumerator Driver: "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39) {Bad Image} %hs is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support. Error status 0x" I have driver version 8.85.75.0 from 2016-06-13. Window 10 1909 x64 Latest Logitech Gaming Software 9.02.65 from 2018-10-08 Can you check at your side, and which driver you have and where to find correct driver. EDIT: Solution was turn off Core Isolation Memory Integrity as suggested here: after reboot driver was running fine!

Hi all G13 users I need you help regarding Logitech G13 and thread I bought used G13 and I can't get it working... Feel dumb, how difficult can be configure G13. I assign keystroke to keys, assign profile to dcs.exe file and make profile active, but nothing happens when I hit keys. Then I discover problem with Logitech Gaming Virtual Bus Enumerator Driver: "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39) {Bad Image} %hs is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support. Error status 0x" I have driver version 8.85.75.0 from 2016-06-13. Window 10 1909 x64 Latest Logitech Gaming Software 9.02.65 from 2018-10-08 EDIT: Solution was turn off Core Isolation Memory Integrity as suggested here: after reboot driver was running fine! Can you check at your side, and which driver you have and where to find correct driver.

Hi all G13 users I need you help regarding Logitech G13 and thread I bought used G13 and I can't get it working... Feel dumb, how difficult can be configure G13. I assign keystroke to keys, assign profile to dcs.exe file and make profile active, but nothing happens when I hit keys. Then I discover problem with Logitech Gaming Virtual Bus Enumerator Driver: "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39) {Bad Image} %hs is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support. Error status 0x" I have driver version 8.85.75.0 from 2016-06-13. Window 10 1909 x64 Latest Logitech Gaming Software 9.02.65 from 2018-10-08 EDIT: Solution was turn off Core Isolation Memory Integrity as suggested here: after reboot driver was running fine! Can you check at your side, and which driver you have and where to find correct driver.

Hi all G13 users I need you help regarding Logitech G13 and thread I bought used G13 and I can't get it working... Feel dumb, how difficult can be configure G13. I assign keystroke to keys, assign profile to dcs.exe file and make profile active, but nothing happens when I hit keys. Then I discover problem with Logitech Gaming Virtual Bus Enumerator Driver: "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39) {Bad Image} %hs is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support. Error status 0x" I have driver version 8.85.75.0 from 2016-06-13. Window 10 1909 x64 Latest Logitech Gaming Software 9.02.65 from 2018-10-08 EDIT: Solution was turn off Core Isolation Memory Integrity as suggested here: after reboot driver was running fine! Can you check at your side, and which driver you have and where to find correct driver.

Hi all G13 users I need you help regarding Logitech G13 and thread I bought used G13 and I can't get it working... Feel dumb, how difficult can be configure G13. I assign keystroke to keys, assign profile to dcs.exe file and make profile active, but nothing happens when I hit keys. Then I discover problem with Logitech Gaming Virtual Bus Enumerator Driver: "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39) {Bad Image} %hs is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support. Error status 0x" I have driver version 8.85.75.0 from 2016-06-13. Window 10 1909 x64 Latest Logitech Gaming Software 9.02.65 from 2018-10-08 EDIT: Solution was turn off Core Isolation Memory Integrity as suggested here: after reboot driver was running fine! Can you check at your side, and which driver you have and where to find correct driver.

:doh: I had smaller SSD after chane forgot to set it... thx :thumbup: I'm feel sorry...

One thing I set low preset of graphics settings in DCS now RAM usage hit 10-10.5 GB and crash in dcs.log I see more errors 'out of memory' ... no memory for sound???? 6 GB left.... dcs.log.txt

I try restore Nvidia settings to default - no change I lower all graphics settings in DCS - no change I see when in windows task manager my system hit 12GB ram usage then DCS crash/quit in dcs log I see: 2019-12-04 00:51:34.600 ERROR DX11BACKEND: failed to create vertex buffer. Reason: E_OUTOFMEMORY 2019-12-04 00:51:34.600 ERROR DX11BACKEND: Failed assert `false && "failed to create vertex buffer"` at Projects\render\dx11backend_win8\Source\DX11BufferManager.cpp:370 Clearly something with memory I have 16GB... but still during this issue testing windows report me that my system is lower on memory!

Crash when join any multiplayer server No matter which server I choose DCS crush when progress bar fill-up to end so just before joining DCS 2.5.5.40269 Open Beta CPU: i7 7700 GPU: GeForce GTX 1080 8GB DDR5 RAM: 1x16GB DDR4-2400 dcs.log.txt

It happens really often I have 2 screens so I can switch between several apps in background, I use DCS in window mode to easily use Alt-Tab. Most of a time DCS is just closed, not crashing-report windows appear, but this time I got some more logs. DCS 2.5.5.40269 Open Beta CPU: i7 7700 GPU: GeForce GTX 1080 8GB DDR5 RAM: 1x16GB DDR4-2400 dcs.log-20191203-225604.zip dcs.log.txt dcs.log.old.txt

Tried to find, since I'm Polish Russian version works for me, can you share a link??

Anybody try VA 1.8 already with VAICOM PRO ???

OK thx, reinstall Gametrix JetSeat Control Panel and restart helped. Sorry for late respone, working to much. One question more SSA working really good, but Gametrix JetSeat Control Panel can't connect to the cushion, I guess it's needed only for DDLs for SSA, right?

@Andre Hi, just today I got my JetSeat FSE, I follow instruction with installation on blog but when I plug USB and start SSA I got "Couldn't connect to JetSeat vibe cushion. I see cushion as USB device in windows10 settings but SSA do not detect it. Moreover when I start UWVeditor I got: ************** Exception Text ************** System.NullReferenceException: Object reference not set to an instance of an object. at UWVeditor.Form1.timer1_Tick(Object sender, EventArgs e) at System.Windows.Forms.Timer.OnTick(EventArgs e) at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) ************** Loaded Assemblies ************** mscorlib Assembly Version: 4.0.0.0 Win32 Version: 4.8.4042.0 built by: NET48REL1LAST_C CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll ---------------------------------------- UWVeditor Assembly Version: 1.1.0.0 Win32 Version: 1.1.0.0 CodeBase: file:///C:/Users/mplic/AppData/Local/Apps/2.0/9C00D4ZT.28R/3AJ7MXD1.0J7/sims..tion_582bdd2a80198c18_0001.0003_774327634533d77f/UWVeditor.exe ---------------------------------------- System.Windows.Forms Assembly Version: 4.0.0.0 Win32 Version: 4.8.4042.0 built by: NET48REL1LAST_C CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll ---------------------------------------- System Assembly Version: 4.0.0.0 Win32 Version: 4.8.4001.0 built by: NET48REL1LAST_C CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll ---------------------------------------- System.Drawing Assembly Version: 4.0.0.0 Win32 Version: 4.8.3752.0 built by: NET48REL1 CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll ---------------------------------------- System.Configuration Assembly Version: 4.0.0.0 Win32 Version: 4.8.3752.0 built by: NET48REL1 CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll ---------------------------------------- System.Core Assembly Version: 4.0.0.0 Win32 Version: 4.8.4042.0 built by: NET48REL1LAST_C CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll ---------------------------------------- System.Xml Assembly Version: 4.0.0.0 Win32 Version: 4.8.3752.0 built by: NET48REL1 CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll ---------------------------------------- System.Windows.Forms.DataVisualization Assembly Version: 4.0.0.0 Win32 Version: 4.8.3815.0 CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms.DataVisualization/v4.0_4.0.0.0__31bf3856ad364e35/System.Windows.Forms.DataVisualization.dll ---------------------------------------- Accessibility Assembly Version: 4.0.0.0 Win32 Version: 4.8.3752.0 built by: NET48REL1 CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll ---------------------------------------- ************** JIT Debugging ************** To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled. For example: <configuration> <system.windows.forms jitDebugging="true" /> </configuration>

you can use this mod as well... https://www.digitalcombatsimulator.com/en/files/3307091/