bad_turbulence

Let me know if you ever found one for the CM2, thanks!

yep, split by 32 not only replicates the columns x3 in controls but it will also affect throttle axis percentages requiring re-calibration.

gotcha, sounds good. i will attempt to bind it accordingly. I have just noticed (because I haven't programmed the entire T50CM2 yet, is that there seems to be on on the right side of the throttle on the back side (mini-stick with push button)....this might end up being my slew

Mine shows the "N" you speak of on the RWR (Helios). What does that stand for and it's off-center to the left. Is that just a Monitors.lua tweak thing?

how'd that AOA turn out. Looks like a great idea.

QQ: on the TDC slew bindings, do you bind the G13 stick like you would any other hotas hat? Is it 8-way? <<OR>> is this more of a mouse action that smoothly moves the TDC cursor around. In other words, does it move the TDC cursor mechanically or with smooth motion?

ok , thanks, i will look for one and I appreciate the insight into this fantastic possibility.

thanks for sharing and I will add any experiences that seem useful after i hammer things out. First order of business is to check out the G13. I notice that's there were two other devices you mentioned, one is the G15 and there was even another. Which one is the best for DCS? Hands down G13, or do the other ones have a place in the running?

im trying to find the right tweaks too, im using a 1920x1080 touchscreen, AMPCD is too large of green lines to the point where they are blurry., there is a mod that turns them white

I'm a 3-screener (until i invest in the much newer VR technology), would these edits not be applicable to my configuration in your estimation?

it improves from a blob but i have this item in the left center of the bullseye center of the RWR that is somewhat fuzzy. and then for example, the MIG-29 "29" is real fuzzy as well but you can make out that it says "29" , did i do something wrong or is that what you're seeing? EDIT, it's an "N" right in the center or off-center a bit, kind of annoying and i know it probably should be there.

This seems to work really well. My AMPCD is a blurry green text on the HELIOS screen, not sure if thats an import/export issue...still searching on that one. THANKS again as that made a HUGE difference on my 2560x1440 screens. Helios another story due to DCS's export issues.

it improves from a blob but i have this item in the left center of the bullseye center of the RWR that is somewhat fuzzy. and then for example, the MIG-29 "29" is real fuzzy as well but you can make out that it says "29" , did i do something wrong or is that what you're seeing? But im not quite centered. that might be my viewports but i thought i have it dead on....EDIT, i check the viewports, they are ok. there is an "N" as in Nancy, off-center in the center of the RWR, not sure what "N" stands for but it's off to the left center of the bulleye, not sure why. But anyway, any help on what that is would be helpful and why its off-center. ALSO, in HELIOS, the AMPCD screen is jacked up with blurry green text. I heard where some when to white color but that seems to be unreadable on mine. ANY SUGGESTIONS?

hey, how'd you get that kneeboard to come up. :lol:

Should there be two mapped weapon release buttons (DCS F/A 18 v1.7) Button 4 (red button) and Button 20 (trigger)? Just wondering if i should set them both to weapon release or not, or go back to v1.6 and use it for spin Recovery? Any help is appreciated!!!

what is the round black thing attached to T3?

my arduino has been setup for rotary encoders 8x2 (16 total) through the use of two parallel cables (going from board to ardunio). is there a sketch i can use via DCS-BIOS to see if it works out of the gate? (i purchased the combo, i did not wire them up myself but have the wiring diagrams). It's used for x-plane currently. Arduino has ethernet added and 2 DB-25 added. Current functions of the encoders are left/right knob, single-push, double-push, and long push. This unit was produced by PeninsulaSims.com and currently, was designed for X-plane.

sorry i can't answer your question but i have a quick question of my own for you if you don't mind.....my arduino has been setup for rotary encoders 8x2 (16 total) through the use of two parallel cables (going from two encoder boards to ardunio). is there a sketch i can use via DCS-BIOS to see if it works out of the gate? the ardunio has an ethernet and DB-25 x 2 (i purchased the combo, i did not wire them up) thx a ton!

Did Air Display work?

if im low on USB ports and would like to get an internal sound card for this purpose, what product would you recommend that's workable but not too cheaply made? Something like this: https://www.amazon.com/GODSHARK-Internal-Windows-Profile-Bracket/dp/B07R191M25/ref=sr_1_18_sspa?dchild=1&keywords=internal+sound+hard+PCI-E&qid=1588609427&sr=8-18-spons&swrs=AE588B644C9687C500EE6EB857D03E54&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUE5VTNVTkxGWDZUVFomZW5jcnlwdGVkSWQ9QTA2NzkxNjg2V1NFTTNFRVU2QVkmZW5jcnlwdGVkQWRJZD1BMDg2MzA2NzIwTjdKV0U2UkQ1TkMmd2lkZ2V0TmFtZT1zcF9hdGZfbmV4dCZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU= What color jack do i plug into on the above GODSHARK device AND if I go USB, something like this: https://www.amazon.com/UGREEN-External-Converter-Headphone-Microphone/dp/B01M7QQQC7/ref=redir_mobile_desktop?ie=UTF8&aaxitk=d8EtHohht2Ol8.eIxSsqdA&hsa_cr_id=8744743280501&ref_=sb_s_sparkle What type of inputs do i need on the sound card? Do I need RCA jacks, or headphone style 3.5mm jacks on the sound card itself?

I read your post twice and I'm glad I read it a 2nd time, everything just clicked. This system is completely separate from the standard sounds from DCS that go to the primary sound output device. This product actually has a configuration of it's own sound card that it can see in device manager (that you, as the user, selects from a pull-down menu)...thus, this is its own independent deal altogether. BINGO! I'm looking on Amazon right now for a 2nd sound card. Thanks so much f4l0

I am using my built-in sound card (gigabyte mobo) for my sound-bar and an external AMP connected to two speakers..so i already have two outputs using a splitter. Will i need a third output for Sim Shaker for Aviators (for use with my ButtShaker Gamer2) from that same audio card? Or will I have to get another sound-card? thanks all !!! This is the splitter I'm using but it's optical and would mean that I would need a third output to be converted to RCA Audio jacks and before I buy another converter, I wanted to check with y'all. https://www.amazon.com/gp/product/B00HQ2R314/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1. (<<<---That's my splitter) So in summary: My computer goes to the 3-way splitter, , from the splitter I go straight to my optical connection on my SoundBar on my desk, then the 2nd splitter TOSLINK cable goes to my converter to RCA output which is for my Amp to 2 back speakers.

I have same setup, what have you found is a good configuration at the graphics settings and also settings in 3D settings of your nVidia card?

hey Baur, do you know where I can find one for version 4 (throttle)? thanks man!

+1