bad_turbulence

great, thanks. already there and asking a question, lol. thx again!

That link appears to be pointing to a web sales store that is no longer in business. Do you know where I can find one or a product like this?

any luck since your last go-round with this? i have 3 1440p but mine are only 60Hz as opposed to 144Hz. I tried Helios with a 4th monitor but it borked my setup (my inexperience at fault and my system called me out on the resolution being so high). 8960x1440 But back to just the basic three screen right now. My setup works pretty good with 2 1440 and one 1920 to get to 7040 (i have a 1440p on the blink so this is temporary). so im at 1.777777777777778 (that's 14 7's) and its very workable. 7040 x 1440 (right screen is partial due to being a 1920x1080 PC Specs: 6800K 4.0Ghz , 2080Ti (not overclocked, just standard founders edition), 32GB, 3 27" PB278Q (1 touchscreen 1980x1024 15.6" screen (not current used - only in x-plane), would love to get it working with Helios - F-16C F/A 18 Hornet perhaps (or what anyone would suggest)....but i have lots to do to get the configuration correct. might be too much to ask the 2080Ti to do. thx all

Just curious, what monitor do you run to get frames like that? Must be a whopper. thx!

what would be your recommendation for 3 to 4 monitors on single 2080Ti card as far as graphics in-game settings and on nVid. controller? 3 2K monitors 1 1080p? thx-in-advnce

Settings (DCS, nVidia Control Panel) & Monitor config? Computer System Specs also please? Great video, great air vessel.

you can buy two 3080Ti's for that price and set them up with NVLink and have a super system. And you'd still have money left over to get the Virpil Throttle.

can you post pictures and diagrams, if you had already done that , sorry for repeating

hi, sorry im not sarge but i do have a 4 monitor "T" shape. It's quite the struggle getting it figured out. I have two 27" 1440's on 1 & 2 , my 3rd monitor is 23" 1920x1080 (far right). The bottom monitor (bottom-middle) is a 15.6" touchscreen. I am working on replacing #3 with another 1440p but I don't have it yet. So i have to do with what I have for now during CV19. But my main question is, how should i situate the monitors in windows 10? and then should i do 2560+2560+1920+1920 for the width? Or should i make the bottom monitor something like 1024x768 so i use less pixels and it can suffice with less screen to put instruments but they might appear larger which is good? So if i take the first example, i would have 8960x 1440 in windows with 4 across horizontally. Then we trick Helios or DCS into thinking they are across when really the 4th monitor is below forming the "T". Or are those numbers wrong? I know it's a mess so if you or anyone has ideas what to do with this quandary, let me know. SO i guess DCS doesn't know the difference as to where the monitors are physically located, so that is the trick i suppose. just letting it wrap around to the 4th when really it's not wrapping, its just doing what windows thinks its doing, correct? but then when you go back to working on your computer in a non game environment, you have to switch it back. But in any event...some suggestions would be just great, I'm worn out. Thanks for everyone's input into this thread...it's wonderful to know that someone has figured all this out.

Did you ever get it figured out? i have 2 27" 1440p monitors (we'll call them 1 & 2), my third monitor on the far right is a 23" 1920X1080 monitor. My 4th monitor is a touchscreen (15.6") directly below monitor #2, so it creates a "T". I saw another thread where someone uses a open source to configure the "T" formation. But im wondering if i should just use surround for the 3 monitors (but since there is an ugly duck in #3 monitor, is that possible)? and then the 4th , how can i get the lower cockpit on it just for a few instruments (would make flying much easier). I love 3 monitors, it's awesome so i don't use VR because my Oculus Rift is a screen-door creator and i will upgrade to better VR in the future but for now it's all I have). So i'd like to stick with a 4 monitor concept. And I AM waiting for like monitor to be fixed for #3, but it may be a long while due to CV-19. but for now im in that strange situation with odd man out. All of these monitors are connected to a 2080Ti , so i have just one 2080Ti. So far on 3 monitors frame rates are doing good. i need to tweak settings and find the right balance, but man is it pretty.

DCS can see the CM2 as Left VPC Throttle in three columns. Can you screen print this for clarification. Also, are you in Sim mode or Game mode? And does DCS show the throttle movement in the controls setup and just not work in-flight or does it not show the little horizontal bar moving when you work the throttle fore and aft?

So what's the Supercarrier , is that what comes with the F18?

Oh no, are you saying there are a bunch of lemons? oh boy, time to do some thorough testing.

is it the detents you like about the old one? I didn't realize it was back-lit. Is the new one back-lit (in addition to the clear buttons which are color-adjustable.?) What else makes the old one more preferable.

is it still holding up good? I was wondering if you knew anyone using the Vipril base and grip (Mongoos new version base and grip?) It's 383 usd for the base+shipping, so i want to make sure I'm making the right decision, then I would need to get the desk-mount and the grip (when available), and then the throttle. This investment seems worth it because it will probably last 4 to 6 years ..... Let me know what you think. Here is the exact part #'s of what i was thinking about: VPC MongoosT-50CM2 Base VPC MongoosT-50CM2 Throttle

Hi StrongArm. I highly value your opinion as it relates to interaction with the X52 and DCS with the A-10C in mind. Could you let me know where to find a good download of your config for current DCS (March 28th, 2020 version time-frame)? Thanks so much..I would hate to download the old one and lose some current setup trial and error I've been working on. But I'd rather just use your profile and be worry-free. It's such a mess trying to do it corrently.

Does anyone have a current suggestion for what has worked out the best as it relates to the X52 A-10C DCS config? Would you suggest doing the modes or no ?(especially as it pertains to VR). So, do you have one recommendation for VR, and yet a different one for non-VR play? And do those recommendations match the above thread or have things changed in your minds?

Hello, i also have the stream deck but was all the way up to 3.3.x.x.x. i still have no function of the keys in elgato but in x-plane 11. i went back to 3.1 and nothing. it used to work back on earlier versions so Im having a similar issue. i also have DCS but have not tried it in there yet since x-plane doesnt work. Has there been any additional information that you have garnered with this problem other than going back to 3.1. Im stuck with this because it does not work in any plane now. puzzled and any help is appreciated.