vgilsoler

The axis labeled in control setup don't correspond to the axis in cockpit - RSI-6K Volume Knob in setup moves RSI-6K Antenna control handle lock knob in cockpit - RSI-6K Wave control handle in setup moves RSI-6K Volume knob in cockpit Why the Antenna tuning or the remote receiver knob are not available as axis but a handle lock knob it is?

Where are the missions of Normandy map that are described in the newsletter? I can’t find them in missions section for P47D, P51D or FW190D9.

At this moment, to override default IA behavior the mission creators need to add scripts at mission so the server could be overloaded by them. What I'm thinking is some type of API running on an external resource that could modify the behavior of the unit assigned to. Something like mission exporting the IA data speed, location, sensors, etc. and receiving new parameters those modify the heading, weapons, throttle, etc. So you could assign different "behavior" to same type of IA units. Benefits: - Offload the CPU resources of server running the mission to one (or more) external resources. - Using a public API service, mission creators could share in a central point their "modified" behaviors. And other mission creators select them from mission editor. - Data could be passed to a Machine Learning service that would "coordinate" or modify the actions of the IA units based on previous missions. This is not for short, medium or long term, just wanted to light the spark of developers (inside or outside ED) to start to think about it.

After read some posts about the configuration at 4k, I decided to try again moving from 1920x1080 to 3840x2160 I did a clean installation of nvidia drivers and left the settings by default, I disabled the windows HDR setting. I reinstalled again the beta and set the attached settings in DCS. And now it's a totally different game, I can see contacts at 20km, no shimmering, no excessive bright at cockpit, and the performance in the mission was very correct. I need to try another mission with more objects and I think I will need to reduce the settings. But now DCS seems the sim I was looking for the last 20 years. It seems 2.9 is far better for 4k than it should be for 1080. I hope they can put both at same level. practice_p47_beta_4k.trk

I tested the same mission i use for practice in the P47D in The Channel map on 2.8 and 2.9. I need to say I prefer not to use beta versions but saying the changelog I liked to taste the new graphical settings. About performance and eye candy 2.9 seems a big step forward, I was able to setup all settings at maximum using TAA, no shimmering on buildings or other planes, more than 100 fps (sometimes drop to 50) but nothing important. If all the mission would have gone in that way I would be a very happy man, but what worried me is the new spoting contacts, or other objects. Just going to the runway, I saw the windsock become transparent for a moment (min 6 aprox), but later it happened the same chasing a FW190 (min 60 aprox) in a dive and losing the contact, or chasing a JU88 (min 70 aprox) Trying to locate and escort a B17 was also more difficult than in 2.8. I hope that is what is referred in the changelog as "some visual issues may be seen in certain hardware/graphical options combination" I attach both tracks, the realease track is only until B-17 is located. i7 3770k @3.9 Ghz - 32GB RAM - RTX 4060 - SSD for OS and DCS practice_p47_beta.trk practice_p47_release.trk

And Stuka and german level bombers ... To wish is free

I have an axis not assigned to anything else and from the remaining axis controls I selected the tailwheel lock for it.

If I assign the tailwheel lock to an axis it doesn’t move into the cockpit. Same axis works for other controls like flaps or landing gear. Assigning keys makes it working.

The CPU bond message in this mission is flashing. In other played missions it doesn’t do.

In that case the CPU requirements statement should be updated as this CPU is included for High Graphics settings. Specially if you have in mind that DCS in Single Thread does not matter how many cores the CPU has. CPU: Core i5+ at 3+ GHz or AMD FX / Ryzen; Thanks for your response.

I disabled one drive and DCS as already in the ESET exceptions. I've setup pagefile to 32GB. I repeated the mission again to get the time data: From T0 to T1000 aprox 60 FPS at T1000 to T1200 aprox 25 FPS at T1200 aprox 17 FPS at T1600 aprox 15 FPS at T1900 aprox 10 FPS at T2050 aprox 40 FPS From T2700 to the end 60FPS The results are few better than the first report. I did the mission in ST and it was worst than in MT. I attach the track and DCS log from this test. dcs_2.log BaedekerRaid_FPS_2.zip

I got a drop in FPS running the Baedecker Mission in the Channel Map. At the beginning and at the end of mission the FPS are constant at 60 FPS (the FPS are limited to Vsync) Even when flying around the bombers formation. Later the FPS down to 30 or even below 10 FPS. I deleted fxo and metashaders folder before launching the mission and take the FPS data. I also launched a windows performance monitor session to be sure the hardware resources are used by DCS and not by other software or service. I attach the track, dcs and debrief logs, the tacview data the performance monitor report and the sysinfo export (unfortunately it was took in spanish but I hope it could be useful for you) Let me know if you need I provide more details. Regards, performane_monitor_report.zip dcs_logs.zip BaedekerRaid_FPS_track.zip Tacview-20230908-220721-DCS-Fw190D9-FWAF-Channel-Baedeker Blitz Canterbury Raid.zip sysinfo.txt

Like other modules in DCS, the P-47 should have a Challenge Campaign. In fact, all modules in DCS should have one. It is a good point to start with a module after buy it.

It seems the general result is a smoother game.

I did a test yesterday with a simple mission I use for aiming training (a FW190D9 VS a B17G) Usually I get some stutters when B17G gunners start to fire for first time. With MultiThread the FPS drop, but in SingleThread the issue is with sound. I tested the config provided by Reflected adjusted to my rig -GPU scheduler OFF - Vsync off in game - Vsinc on in NVCP - Triple buffering on - Limited my FPS to 60 in the NVCP I deleted fxo and metashaders2 folders. After that the first time I launched the mission in MT the stutters went away, but the second time I launched the mission they came back again. Later today or during weekend I'll repeat the mission to confirm the results.

If you multiply the size for each possible module and if you don't use these liveries, it is excessive. It could be optional to download/install them.

Maybe an optional check for download full liveries, or a select which model liveries do you want to download. It will be enough. 14GB of F14 liveries by default, I think it's a bit excessive.

Just dreaming and making a wish list IA: - better flight and combat capabilities. Flyable Planes: (I don't want to put another versions of existing planeset) - Bombers (Ju-88, B-25, He-111, B-26, B-17, B-24, Lancaster) Put human bombers and fighter pilots will come later as bugs to honey pots. - Fighters (P-38, Typhoon) IA Planes (better if flyable): - FW-200, MC-205, Bf-110, ME-262, P-40, Ju-87, Beaufighter Maps: - Mediterranian, Italy or North Africa Assets: - More of everything (tanks, trucks, AAA, etc) but ships from Royal Navy, Regia Marina and Marine Française are very welcome.

Problem solved. 1. Login as admin in Vista is not the same as run as admin. 2. F9 and F12 must not be mapped in trackir to run blackshark. Use another keys. By the way, I don't know any reason for that a game must be running as admin to work. I hope in next patches DCS will not run as admin to work.

I use trackir4 version both hardware and software. I will resetup the exes for run as admin. I changed the controls manually.

I login as admin. BlackShark and Trackir run as admin also.

I've reinstalled BlackShark and left default setup. but It's still happening the same. These are screenshots of the trackir setup. When I try to take a screenshot of blackshark controls setup I only got a black screen but the mapped keys in trackir are deleted from blackshark controls.

I tried creating a new profile for blackshark, using a fixed profile, and checking the profile assigned to blackshark. If I'm in game and I press the mapped keys nothing happens. If I do ALT+TAb, return to windows desktop and press again the keys it works. It happens the same if the session I'm running is administrator or not. I'll try to take some screeenshots later.

I tried login as administrator and it happens the same inside Blackshark the mapped keys in trackir don't work. If I minimize Blackshark the keys work.

In my last attempt I run trackir as normal user. I'll try to remap again as admin login.