Outlaw24 Posted March 28, 2010 Posted March 28, 2010 Am I overlooking the keystrokes to re-arm and re-fuel an aircraft after landing, or did they remove these options in FC2? Spoiler: MSI Z790 Carbon WIFI, i9 14900KF, 64GB DDR4, MSI RTX 4090, VKB STECS Mk ll throttle, VKB Gunfighter Ultimate MCG Pro w/200mm Extension, Winwing Orion Rudder Pedals W/damper, Wingwin Monitors/MFD's, UTC MK II Pro, Virpil TCS Plus Collective, MSI 34" QD-OLED @240Hz monitor, Samsung 970 Pro M2 2TB (for DCS), Playseat Air Force Seat, KW-980 Jetseat, Vaicom Pro, Tek Creations panels and controllers.
Thunderbird Posted March 28, 2010 Posted March 28, 2010 you have to do it after u land use "\" then sellect option F7 for maintainance to refuel first you must turn off the engine then request for refuel otherwise it wont work
Outlaw24 Posted March 28, 2010 Author Posted March 28, 2010 you have to do it after u land use "\" then sellect option F7 for maintainance to refuel first you must turn off the engine then request for refuel otherwise it wont work Thanks, for the quick reply, similiar to DCS: BS :thumbup: Spoiler: MSI Z790 Carbon WIFI, i9 14900KF, 64GB DDR4, MSI RTX 4090, VKB STECS Mk ll throttle, VKB Gunfighter Ultimate MCG Pro w/200mm Extension, Winwing Orion Rudder Pedals W/damper, Wingwin Monitors/MFD's, UTC MK II Pro, Virpil TCS Plus Collective, MSI 34" QD-OLED @240Hz monitor, Samsung 970 Pro M2 2TB (for DCS), Playseat Air Force Seat, KW-980 Jetseat, Vaicom Pro, Tek Creations panels and controllers.
Kuky Posted March 28, 2010 Posted March 28, 2010 Also I think you can't R&R on all bases... probably they have to have some aircraft set to take off or maybe land on them... today I landed on one base and I could not rearm or refuel... landing on other bases I could PC specs: Windows 11 Home | Asus TUF Gaming B850-Plus WiFi | AMD Ryzen 7 9800X3D + LC 360 AIO | MSI RTX 5090 LC 360 AIO | 55" Samsung Odyssey Gen 2 | 64GB PC5-48000 DDR5 | 1TB M2 SSD for OS | 2TB M2 SSD for DCS | NZXT C1000 Gold ATX 3.1 1000W | TM Cougar Throttle, Floor Mounted MongoosT-50 Grip on TM Cougar board, MFG Crosswind, Track IR
4c Hajduk Veljko Posted March 28, 2010 Posted March 28, 2010 Well, how do I make my own, custom, laodout? Thermaltake Kandalf LCS | Gigabyte GA-X58A-UD3R | Etasis ET750 (850W Max) | i7-920 OC to 4.0 GHz | Gigabyte HD5850 | OCZ Gold 6GB DDR3 2000 | 2 X 30GB OCZ Vertex SSD in RAID 0 | ASUS VW266H 25.5" | LG Blue Ray 10X burner | TIR 5 | Saitek X-52 Pro | Logitech G930 | Saitek Pro flight rudder pedals | Windows 7 Home Premium 64 bit
159th_Viper Posted March 28, 2010 Posted March 28, 2010 Well, how do I make my own, custom, laodout? Similar to BS, in the Loadout editor, hit the 'New' tab, enter a description and select relevant Ordinance. Once In-Game you will rearm with the Default request one would assume. In MP one would guess that you are at the mercy of the Options/Mission designer for the Loadout. Novice or Veteran looking for an alternative MP career? Click me to commence your Journey of Pillage and Plunder! [sIGPIC][/sIGPIC] '....And when I get to Heaven, to St Peter I will tell.... One more Soldier reporting Sir, I've served my time in Hell......'
Cougar Posted March 28, 2010 Posted March 28, 2010 (edited) Am I overlooking the keystrokes to re-arm and re-fuel an aircraft after landing, or did they remove these options in FC2? Also I think you can't R&R on all bases... probably they have to have some aircraft set to take off or maybe land on them... today I landed on one base and I could not rearm or refuel... landing on other bases I could For R&R the airfield you are landing on must be a friendly one. So if you are in the blue coalition you should look for a blue flag on the bottom right see screen below. For red coalition you need a red flag see screen below If you land on a neutral airfield you should see a white flag see screen below With that being said, you can land on any airfield but if you need to R&R you will need to land on a captured airfield by your coalition and only at that point you will get Ground service at your disposal. Now how to make airfield captured by your coalition? Have a ground vehicle within 2 KM of the airfield and the neutral base will be captured and your side will be able to use that airfield with the ability to R&R. If the ground vehicle is destroyed the base will become neutral again until it's captured again. The only permanent airfield that will remain captured by your coalition even if there's no vehicle is the one where you will respawn and the plane is set for Takeoff from ramp or runway. Since we are on the subject of airfield, I have a suggestion to make, add a command post vehicle at the airfield you own in case the tower is destroyed from that airfield. The command post will maintain the comms for that airfield. If there's no tower and no command post you won't be able to establish comms with the airfield. USA = APC M1025 HMMWV Russia = CP SKP-11 ATC command post. Hope it clears things up a bit Edited April 7, 2010 by Cougar 1
Breakshot Posted March 29, 2010 Posted March 29, 2010 Good post Cougar... Sounds like all the LRM features we had to use previously (in FC1) were implemented, and then some! Tim "Breakshot" Mytrofanov | C.O. of 51 ПВО / 100 КИАП Regiments | twitch.tv/51breakshot
4c Hajduk Veljko Posted March 29, 2010 Posted March 29, 2010 Cougar, I don't see pictures in your post? Thermaltake Kandalf LCS | Gigabyte GA-X58A-UD3R | Etasis ET750 (850W Max) | i7-920 OC to 4.0 GHz | Gigabyte HD5850 | OCZ Gold 6GB DDR3 2000 | 2 X 30GB OCZ Vertex SSD in RAID 0 | ASUS VW266H 25.5" | LG Blue Ray 10X burner | TIR 5 | Saitek X-52 Pro | Logitech G930 | Saitek Pro flight rudder pedals | Windows 7 Home Premium 64 bit
4c Hajduk Veljko Posted March 29, 2010 Posted March 29, 2010 In MP one would guess that you are at the mercy of the Options/Mission designer for the Loadout.Yes, that was my original concern. I don't know how to create/load custome payload when in MP game? Thermaltake Kandalf LCS | Gigabyte GA-X58A-UD3R | Etasis ET750 (850W Max) | i7-920 OC to 4.0 GHz | Gigabyte HD5850 | OCZ Gold 6GB DDR3 2000 | 2 X 30GB OCZ Vertex SSD in RAID 0 | ASUS VW266H 25.5" | LG Blue Ray 10X burner | TIR 5 | Saitek X-52 Pro | Logitech G930 | Saitek Pro flight rudder pedals | Windows 7 Home Premium 64 bit
Cougar Posted March 29, 2010 Posted March 29, 2010 Cougar, I don't see pictures in your post? Hmmmm anyone don't see my pictures?
Thunderbird Posted March 29, 2010 Posted March 29, 2010 cougar i cant see it as well Invalid Attachment specified. If you followed a valid link, please notify the administrator
4c Hajduk Veljko Posted March 29, 2010 Posted March 29, 2010 here same order These are visible. However, I still can not see pictures in your original post. Nor I can see your signature picture. Thermaltake Kandalf LCS | Gigabyte GA-X58A-UD3R | Etasis ET750 (850W Max) | i7-920 OC to 4.0 GHz | Gigabyte HD5850 | OCZ Gold 6GB DDR3 2000 | 2 X 30GB OCZ Vertex SSD in RAID 0 | ASUS VW266H 25.5" | LG Blue Ray 10X burner | TIR 5 | Saitek X-52 Pro | Logitech G930 | Saitek Pro flight rudder pedals | Windows 7 Home Premium 64 bit
Recommended Posts