Capt Zeen Posted April 6, 2014 Posted April 6, 2014 Hello all! I just published my ka50 helios profile. You can heck it in this thread: http://forums.eagle.ru/showthread.php?t=122629 Capt_Zeen_HELIOS PROFILES_WEBSITE Capt_Zeen_Youtube Channel
sobe Posted April 8, 2014 Posted April 8, 2014 Capt_Zeen Did you use the standard BS2 Key file? I am going to program my WH and just wanted to make sure that there were not going to be any key command issues between your helios profile and my Hotas profile. Thanks Trackir4 using the latest Trackir 5 software, Win10 Pro [Creator Update] updated from Win7Pro Pro 64Bit, Intel® Core™ i5-2500 3.30 GHz 6M Intel Smart Cache LGA115 , GigaByte GA-Z68XP-UD4 Intel Z68 Chipset DDR3 16GB Ram, GTX MSI Gaming 1060 [6 GB] Video Card, Main Monitor 1 on left 1920x1080 Touchscreen Monitor 2 on right 1920x1080 .
Capt Zeen Posted April 9, 2014 Author Posted April 9, 2014 i used the default bs2 key file. No changes at all. Capt_Zeen_HELIOS PROFILES_WEBSITE Capt_Zeen_Youtube Channel
sobe Posted April 11, 2014 Posted April 11, 2014 Capt Z Now for the next issue. On your panel, the blue buttons for B P AND H auto controls stay lit when pressed off even though the same buttons in the game are unlit. I looked at your Helios script and cannot figure out why this happens. Am I just out of sych between your panel and the game as the game starts in the air? Trackir4 using the latest Trackir 5 software, Win10 Pro [Creator Update] updated from Win7Pro Pro 64Bit, Intel® Core™ i5-2500 3.30 GHz 6M Intel Smart Cache LGA115 , GigaByte GA-Z68XP-UD4 Intel Z68 Chipset DDR3 16GB Ram, GTX MSI Gaming 1060 [6 GB] Video Card, Main Monitor 1 on left 1920x1080 Touchscreen Monitor 2 on right 1920x1080 .
Capt Zeen Posted April 11, 2014 Author Posted April 11, 2014 (edited) Capt Z Now for the next issue. On your panel, the blue buttons for B P AND H auto controls stay lit when pressed off even though the same buttons in the game are unlit. I looked at your Helios script and cannot figure out why this happens. Am I just out of sych between your panel and the game as the game starts in the air? Hello again! Autopilots lights work well here, and other friends computers aswell. Even if you run a started ka50. The input for the lights comes from the export.lua so must work in any case. Be sure you got a correct export.lua instaled, in saved games/dcs/scripts I am using that one: http://forums.eagle.ru/showthread.php?t=97222 It work at the same time for ka50, a10C and fc3, and everything work fine. And of course, you configured in the profile the path to the game, correct? Edited April 11, 2014 by Capt Zeen Capt_Zeen_HELIOS PROFILES_WEBSITE Capt_Zeen_Youtube Channel
sobe Posted April 12, 2014 Posted April 12, 2014 Capt Zeen I am using a export.lau file that works ok with BMS and A10C and I am reluctant to change it this late at night. Over the weekend I will substitute your export file for the one I am using and see what happens. As a separate note, when I loaded your BS2 Helios profile in the Helios editor, and then went to the add interface tab, BS did not appear. I assumed that BS was already combined with the correct interface. However, I have DCS World on my D drive and not my C drive. When I have a blank profile, and go to the add interface tab, BS appears. An issue? Trackir4 using the latest Trackir 5 software, Win10 Pro [Creator Update] updated from Win7Pro Pro 64Bit, Intel® Core™ i5-2500 3.30 GHz 6M Intel Smart Cache LGA115 , GigaByte GA-Z68XP-UD4 Intel Z68 Chipset DDR3 16GB Ram, GTX MSI Gaming 1060 [6 GB] Video Card, Main Monitor 1 on left 1920x1080 Touchscreen Monitor 2 on right 1920x1080 .
tietze Posted April 12, 2014 Posted April 12, 2014 As a separate note, when I loaded your BS2 Helios profile in the Helios editor, and then went to the add interface tab, BS did not appear. I assumed that BS was already combined with the correct interface. However, I have DCS World on my D drive and not my C drive. When I have a blank profile, and go to the add interface tab, BS appears. An issue? The export script that Capt_z links above only regards DCS and will not interfere with BMS. The script does not change any personal preferences. In general terms it provides the link that makes Helios able to get data from DCS. As far as I recall (and I might be wrong) Helios is not aware that DCS now uses Saved Games/Scripts directory for the export script and instead Helios will install it directly into the DCS World folder. But as long as the script is in the correct place (in saved games) what place Helios thinks DCS is installed doesn't matter. But the profile editors button "Setup black shark" or "Setup DCS A-10C" does not work correctly. At least if you decide to use the above script the Setup buttons should not be used. Note that you will have to do some extra editing if also using TARS, TACView or other stuff that also use a DCS export script. Please fix the KA-50 bugs :-) Black Shark: Controller profile & setup, TrackIR profile, pit. Warthog HOTAS: Lubing the stick and extending the stick. Posts on howto customize switches in DCS & . Must-have mods for DCS World and KA-50 (mostly JSGME). Casual couch pilot, watching capped.tv...
Capt Zeen Posted April 18, 2014 Author Posted April 18, 2014 (edited) Added a new version of the profile for 16:9 monitor resolution users. This version got extra indicators and light alarms to fill the complete screen in 16:9 resolutions profile site: http://www.captzeen.com/helios Edited January 28, 2015 by Capt Zeen Capt_Zeen_HELIOS PROFILES_WEBSITE Capt_Zeen_Youtube Channel
sobe Posted May 1, 2014 Posted May 1, 2014 Capt Zeen I am still running 1.27 with your Helios profile and finally everything is working so nicely. Have you updated to 1.28 yet? Is there any issues with your profile and 1.28-i.e., controller problems? Thanks Trackir4 using the latest Trackir 5 software, Win10 Pro [Creator Update] updated from Win7Pro Pro 64Bit, Intel® Core™ i5-2500 3.30 GHz 6M Intel Smart Cache LGA115 , GigaByte GA-Z68XP-UD4 Intel Z68 Chipset DDR3 16GB Ram, GTX MSI Gaming 1060 [6 GB] Video Card, Main Monitor 1 on left 1920x1080 Touchscreen Monitor 2 on right 1920x1080 .
Capt Zeen Posted May 2, 2014 Author Posted May 2, 2014 Capt Zeen I am still running 1.27 with your Helios profile and finally everything is working so nicely. Have you updated to 1.28 yet? Is there any issues with your profile and 1.28-i.e., controller problems? Thanks tested in 1.2.8 and everything works fine 1 Capt_Zeen_HELIOS PROFILES_WEBSITE Capt_Zeen_Youtube Channel
BaD CrC Posted May 2, 2014 Posted May 2, 2014 Confirmed. Love it. https://www.blacksharkden.com http://discord.gg/blacksharkden
Capt Zeen Posted May 3, 2014 Author Posted May 3, 2014 Thanks Bad_CRC :-) Capt_Zeen_HELIOS PROFILES_WEBSITE Capt_Zeen_Youtube Channel
doveman Posted May 3, 2014 Posted May 3, 2014 Thanks for this great profile, Capt Zeen. I know how much work it can take making these as I've had a fiddle with Helios myself and just got a headache ;) Main rig: i5-4670k @4.4Ghz, Asus Z97-A, Scythe Kotetsu HSF, 32GB Kingston Savage 2400Mhz DDR3, 1070ti, Win 10 x64, Samsung Evo 256GB SSD (OS & Data), OCZ 480GB SSD (Games), WD 2TB and WD 3TB HDDs, 1920x1200 Dell U2412M, 1920x1080 Dell P2314T touchscreen
Recommended Posts