wiseking Posted June 7, 2014 Posted June 7, 2014 I'm about to get one 280X for DCS as its discount due to recent devaluation of BIT-coin. Anyone using or used this kind of video card mind giving any comments on it, like the FPS of the DCS, the color display,etc?:helpsmilie:
Mustang Posted June 7, 2014 Posted June 7, 2014 (edited) I'm about to get one 280X for DCS as its discount due to recent devaluation of BIT-coin. Anyone using or used this kind of video card mind giving any comments on it, like the FPS of the DCS, the color display,etc?:helpsmilie: Make sure you install the very latest Catalyst 14.6 display drivers with this card to get the best out of DCS - btw this should be in the tech section of forum ;) Edited June 7, 2014 by Mustang
wiseking Posted June 7, 2014 Author Posted June 7, 2014 Make sure you install the very latest Catalyst 14.6 display drivers with this card to get the best out of DCS - btw this should be in the tech section of forum ;) thank you for your recommendation and remind
wiseking Posted June 7, 2014 Author Posted June 7, 2014 Make sure you install the very latest Catalyst 14.6 display drivers with this card to get the best out of DCS - btw this should be in the tech section of forum ;) Would you mind telling me the FPS of DCS in totally high effects or half high effects with 280X?
Cobra847 Posted June 7, 2014 Posted June 7, 2014 I average around 40-60 fps with most settings on high in our MiG-21, but AMD is certainly suboptimal for DCS. Nicholas Dackard Founder & Lead Artist Heatblur Simulations https://www.facebook.com/heatblur/
SkateZilla Posted June 7, 2014 Posted June 7, 2014 R9-280X is the same Chip as the HD7970 :) Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs
trooph Posted June 7, 2014 Posted June 7, 2014 Its alright :) performance varies from vendors. MSI and GIGABYTE (REV 2!) are the best imho. I see rare dips below 50. Even on a10c with both MFDS in mav and A-G modes on, most settings maxed out with extreme visibility mod
*Rage* Posted June 7, 2014 Posted June 7, 2014 but AMD is certainly suboptimal for DCS. Im not sure thats still the case with the latest drivers. [sIGPIC][/sIGPIC] 64th "Scorpions" Aggressor Squadron Discord: 64th Aggressor Squadron TS: 195.201.110.22
SkateZilla Posted June 7, 2014 Posted June 7, 2014 Its alright :) performance varies from vendors. MSI and GIGABYTE (REV 2!) are the best imho. I see rare dips below 50. Even on a10c with both MFDS in mav and A-G modes on, most settings maxed out with extreme visibility mod For Tahiti Based GPUs, Going by Cooling, Performance and I/O The MSI Lightning is The best. ASUS DCII Behind it. Gigabyte Windforce in third in Cooling/Performance. the 280X Versions doing use the same coolers as the 7970s, MSI's 280X may use the same Shroud and Fans, but it doesnt use the same VRM Array, Memory Chips or Cooling Plate. Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs
T_A Posted June 8, 2014 Posted June 8, 2014 I`m using Sapphire Tri-X factory OC 280X Without mods and all settings to highest and no traffic @ 1920X1200 im getting (with A10C): ~40 on the runway ~50 in the air ~60 in external view (F2) with mods (HDR, very high visibility range , better ground textures etc...) the frames are lower but the game still feels pretty smooth. i chose 280X over the 770GTX because its faster in every other game, and i`m sure with EDGE it will overtake it in DCS as well. IAF.Tomer My Rig: Core i7 6700K + Corsair Hydro H100i GTX Gigabyte Z170X Gaming 7,G.Skill 32GB DDR4 3000Mhz Gigabyte GTX 980 OC Samsung 840EVO 250GB + 3xCrucial 275GB in RAID 0 (1500 MB/s) Asus MG279Q | TM Warthog + Saitek Combat Pedals + TrackIR 5 [sIGPIC][/sIGPIC]
Gerg Posted June 9, 2014 Posted June 9, 2014 I`m using Sapphire Tri-X factory OC 280X Without mods and all settings to highest and no traffic @ 1920X1200 im getting (with A10C): ~40 on the runway ~50 in the air ~60 in external view (F2) with mods (HDR, very high visibility range , better ground textures etc...) the frames are lower but the game still feels pretty smooth. i chose 280X over the 770GTX because its faster in every other game, and i`m sure with EDGE it will overtake it in DCS as well. Yea pretty much same with my Dual-x 280x with a bit of overclock.
wiseking Posted June 11, 2014 Author Posted June 11, 2014 I`m using Sapphire Tri-X factory OC 280X Without mods and all settings to highest and no traffic @ 1920X1200 im getting (with A10C): ~40 on the runway ~50 in the air ~60 in external view (F2) with mods (HDR, very high visibility range , better ground textures etc...) the frames are lower but the game still feels pretty smooth. i chose 280X over the 770GTX because its faster in every other game, and i`m sure with EDGE it will overtake it in DCS as well. Now, i have changed my graphic card into R9 280X and my cpu is FX6350. Other then that, i've update the driver to catalyst 14.6 beta. However, i've got FPS only about 13 when all the effects are high, and 20 when the effects are medium. Would you mind telling me about how to solve this problem.
Recommended Posts