Raven434th Posted December 4, 2014 Posted December 4, 2014 I dunno even where to start...but a good indication would be that even if you completely clear all axis movement input...it still receives input. MAPPING THE MOVEMENT FOR GROUND CONTROL AXIS IS COMPLETELY BROKEN MODUALS OWNED AH-64D APACHE, Ka-50, UH-1H, Mi-8MTV2, Mi-24,MiG-29 FF, Gazelle, FC3, A-10C, A-10CII, Mirage 2000C, F-14 TOMCAT, F/A-18C HORNET, F-16C VIPER, AV-8B/NA, F-15 E, F-4 Phantom, MiG-21Bis, L-39, F-5E, AJS 37 Viggen, MiG-19, F-86, MiG-15Bis, Spitfire IX, Bf-109K, Fw-190D, P-51D, CA, COLD WAR GERMANY,SYRIA, AFGHANISTAN,NEVADA, NORMANDY, PERSIAN GULF, MARIANA ISLANDS,SUPER CARRIER, WORLD WAR II ASSETS PACK, HAWK T1 SYSTEM SPECS AMD 7600X 4.7 Ghz CPU , MSI RX 6750 12 gig GPU ,32 gig ram on Win11 64bit.
Looney Posted December 4, 2014 Posted December 4, 2014 I don't have a problem with this at all [sIGPIC][/sIGPIC] Commodore 64 | MOS6510 | VIC-II | SID6581 | DD 1541 | KCS Power Cartridge | 64Kb | 32Kb external | Arcade Turbo
Raven434th Posted December 4, 2014 Author Posted December 4, 2014 (edited) Yeah well there's diffinately something wrong...I also have double entries in the command column.. ie.. I see rotate turret left and underneath it is rotate turret left again.Something is screwed up somewhere as I don't have any control as to what appears in the command columns,that's their end as far as I know. I even deleted the config file and generated a new one...same problem. And If it was something on my end I would have the same problems when applying axis commands to aircraft...which I don't. Edited December 5, 2014 by Raven434th MODUALS OWNED AH-64D APACHE, Ka-50, UH-1H, Mi-8MTV2, Mi-24,MiG-29 FF, Gazelle, FC3, A-10C, A-10CII, Mirage 2000C, F-14 TOMCAT, F/A-18C HORNET, F-16C VIPER, AV-8B/NA, F-15 E, F-4 Phantom, MiG-21Bis, L-39, F-5E, AJS 37 Viggen, MiG-19, F-86, MiG-15Bis, Spitfire IX, Bf-109K, Fw-190D, P-51D, CA, COLD WAR GERMANY,SYRIA, AFGHANISTAN,NEVADA, NORMANDY, PERSIAN GULF, MARIANA ISLANDS,SUPER CARRIER, WORLD WAR II ASSETS PACK, HAWK T1 SYSTEM SPECS AMD 7600X 4.7 Ghz CPU , MSI RX 6750 12 gig GPU ,32 gig ram on Win11 64bit.
TrigaNZ Posted December 5, 2014 Posted December 5, 2014 I also have this problem. I have cleared the saved games folder and deleted the settings for each controller but still have multi axis input. For example rudder pedals and joystick both turn tank but only rudder pedals shows a setting.
Bushmanni Posted December 5, 2014 Posted December 5, 2014 I have this problem also. I have uninstalled CA and deleted config files and then reinstalled but that didn't help either. Also some of the new controls for CA can't be mapped. DCS Finland: Suomalainen DCS yhteisö -- Finnish DCS community -------------------------------------------------- SF Squadron
Raven434th Posted December 5, 2014 Author Posted December 5, 2014 Oh thank god ...I thought it was only me...no offense yup this totally makes ca unplayable. Question is whats going on???BTW I have a x-55 if that's a help MODUALS OWNED AH-64D APACHE, Ka-50, UH-1H, Mi-8MTV2, Mi-24,MiG-29 FF, Gazelle, FC3, A-10C, A-10CII, Mirage 2000C, F-14 TOMCAT, F/A-18C HORNET, F-16C VIPER, AV-8B/NA, F-15 E, F-4 Phantom, MiG-21Bis, L-39, F-5E, AJS 37 Viggen, MiG-19, F-86, MiG-15Bis, Spitfire IX, Bf-109K, Fw-190D, P-51D, CA, COLD WAR GERMANY,SYRIA, AFGHANISTAN,NEVADA, NORMANDY, PERSIAN GULF, MARIANA ISLANDS,SUPER CARRIER, WORLD WAR II ASSETS PACK, HAWK T1 SYSTEM SPECS AMD 7600X 4.7 Ghz CPU , MSI RX 6750 12 gig GPU ,32 gig ram on Win11 64bit.
Esac_mirmidon Posted December 5, 2014 Posted December 5, 2014 Hey Raven, i had the same problem but here is the solution. Clean not only the ground unit controls and axis in options/controls but also in the "general" tab. I hope this will help you. " You must think in russian.." [sIGPIC][/sIGPIC] Windows 7 Home Premium-Intel 2500K OC 4.6-SSD Samsung EVO 860- MSI GTX 1080 - 16G RAM - 1920x1080 27´ Hotas Rhino X-55-MFG Crosswind Rudder Pedals -Track IR 4
Raven434th Posted December 5, 2014 Author Posted December 5, 2014 (edited) OOOKKKKAYYY...that was the ticket. Thanks a lot. I wonder why this is though??? And is this documented anywhere? Also what is the general category for?? Edited December 5, 2014 by Raven434th MODUALS OWNED AH-64D APACHE, Ka-50, UH-1H, Mi-8MTV2, Mi-24,MiG-29 FF, Gazelle, FC3, A-10C, A-10CII, Mirage 2000C, F-14 TOMCAT, F/A-18C HORNET, F-16C VIPER, AV-8B/NA, F-15 E, F-4 Phantom, MiG-21Bis, L-39, F-5E, AJS 37 Viggen, MiG-19, F-86, MiG-15Bis, Spitfire IX, Bf-109K, Fw-190D, P-51D, CA, COLD WAR GERMANY,SYRIA, AFGHANISTAN,NEVADA, NORMANDY, PERSIAN GULF, MARIANA ISLANDS,SUPER CARRIER, WORLD WAR II ASSETS PACK, HAWK T1 SYSTEM SPECS AMD 7600X 4.7 Ghz CPU , MSI RX 6750 12 gig GPU ,32 gig ram on Win11 64bit.
Raven434th Posted December 5, 2014 Author Posted December 5, 2014 There are still problems with key movement key mapping... this needs some going over by the coders big time MODUALS OWNED AH-64D APACHE, Ka-50, UH-1H, Mi-8MTV2, Mi-24,MiG-29 FF, Gazelle, FC3, A-10C, A-10CII, Mirage 2000C, F-14 TOMCAT, F/A-18C HORNET, F-16C VIPER, AV-8B/NA, F-15 E, F-4 Phantom, MiG-21Bis, L-39, F-5E, AJS 37 Viggen, MiG-19, F-86, MiG-15Bis, Spitfire IX, Bf-109K, Fw-190D, P-51D, CA, COLD WAR GERMANY,SYRIA, AFGHANISTAN,NEVADA, NORMANDY, PERSIAN GULF, MARIANA ISLANDS,SUPER CARRIER, WORLD WAR II ASSETS PACK, HAWK T1 SYSTEM SPECS AMD 7600X 4.7 Ghz CPU , MSI RX 6750 12 gig GPU ,32 gig ram on Win11 64bit.
Steggles Posted July 28, 2015 Posted July 28, 2015 Ah will have to try this when I get home from work. Having to keep the left toe brake on my rudder centred to make it go straight kinda breaks the game. -16AGR- 16th Air Guards Regiment is always looking for pilots - http://www.16agr.com EWRS - Early Warning Radar Script Specs: Gigabyte Sniper Z5-S Intel i5-4670k 3.4GHz OC'd 3.9GHz w/ Thermaltake 120mm Water 3.0 Pro Liquid CPU Cooler 16GB RAM Gigabyte GTX 1080 TM Hotas Warthog: SN: 06976 Saitek Pro Flight Combat Rudder Pedals TrackIR5 with TrackClipPro & Oculus Rift 2x 28" 4k UHD Monitors (3840x2160 each) + 1280x1024
Recommended Posts