OnlyforDCS Posted October 2, 2015 Posted October 2, 2015 Hi, Just installed the module this morning before work to check out the UI and controls, and I noticed that there were no training missions present under the training tab. Is this WIP or intended? Thanks. Current specs: Windows 10 Home 64bit, i5-9600K @ 3.7 Ghz, 32GB DDR4 RAM, 1TB Samsung EVO 860 M.2 SSD, GAINWARD RTX2060 6GB, Oculus Rift S, MS FFB2 Sidewinder + Warthog Throttle Quadrant, Saitek Pro rudder pedals.
uboats Posted October 2, 2015 Posted October 2, 2015 only QS now [sIGPIC][/sIGPIC] My DCS Mods, Skins, Utilities and Scripts | Windows 10 | i7-4790K | GTX 980Ti Hybrid | 32GB RAM | 3TB SSD | | TM Warthog Stick | CH Pro Throttle + Pro Pedal | TIR5 Pro | TM MFD Cougar | Gun Camera: PrtScn |
OnlyforDCS Posted October 2, 2015 Author Posted October 2, 2015 (edited) Is there a start up sequence explained somewhere in one of the videos Wags did? (Or anywhere else for that matter) I assume the manual is also not available yet? Thanks! Edited October 2, 2015 by OnlyforDCS Current specs: Windows 10 Home 64bit, i5-9600K @ 3.7 Ghz, 32GB DDR4 RAM, 1TB Samsung EVO 860 M.2 SSD, GAINWARD RTX2060 6GB, Oculus Rift S, MS FFB2 Sidewinder + Warthog Throttle Quadrant, Saitek Pro rudder pedals.
Cibit Posted October 2, 2015 Posted October 2, 2015 One of wags videos had a quick and dirty start up not sure if it was part of a stream i5 8600k@5.2Ghz, Asus Prime A Z370, 32Gb DDR4 3000, GTX1080 SC, Oculus Rift CV1, Modded TM Warthog Modded X52 Collective, Jetseat, W10 Pro 64 [sIGPIC][/sIGPIC] Adding JTAC Guide //My Vid's//229th AHB
uboats Posted October 2, 2015 Posted October 2, 2015 Is there a start up sequence explained somewhere in one of the videos Wags did? (Or anywhere else for that matter) I assume the manual is also not available yet? Thanks! right panel: battery/net switch, then engine switch left panel, turbine button, once the turbine umber light is on, press right alt+home to unlock throttle, then press engine start button then once engine up, turn on all except left bottom two switches [sIGPIC][/sIGPIC] My DCS Mods, Skins, Utilities and Scripts | Windows 10 | i7-4790K | GTX 980Ti Hybrid | 32GB RAM | 3TB SSD | | TM Warthog Stick | CH Pro Throttle + Pro Pedal | TIR5 Pro | TM MFD Cougar | Gun Camera: PrtScn |
AADrcw Posted October 2, 2015 Posted October 2, 2015 There is a manual and quick start guide. Go to your DCS World beta install folder then Mods/ aircraft/ L39c/ Doc
OnlyforDCS Posted October 2, 2015 Author Posted October 2, 2015 There is a manual and quick start guide. Go to your DCS World beta install folder then Mods/ aircraft/ L39c/ Doc Oh wow, thanks! :) Didn't expect them to release them with the open beta. Can the manual be brought up in the game using the kneeboard? Current specs: Windows 10 Home 64bit, i5-9600K @ 3.7 Ghz, 32GB DDR4 RAM, 1TB Samsung EVO 860 M.2 SSD, GAINWARD RTX2060 6GB, Oculus Rift S, MS FFB2 Sidewinder + Warthog Throttle Quadrant, Saitek Pro rudder pedals.
AADrcw Posted October 2, 2015 Posted October 2, 2015 Oh wow, thanks! :) Didn't expect them to release them with the open beta. Can the manual be brought up in the game using the kneeboard? I personally have never done it but you can use the app http://forums.eagle.ru/showthread.php?t=129341 to convert the PDF pages to the right format for kneeboard pages. I'm not sure how it will work out doing the whole manual though.
ED Team Groove Posted October 2, 2015 ED Team Posted October 2, 2015 The training lessons are WIP right now. We will release them ASAP. Our Forum Rules: http://forums.eagle.ru/rules.php#en
OnlyforDCS Posted October 2, 2015 Author Posted October 2, 2015 Thanks for the heads-up Groove. Much appreciated. :thumbup: Current specs: Windows 10 Home 64bit, i5-9600K @ 3.7 Ghz, 32GB DDR4 RAM, 1TB Samsung EVO 860 M.2 SSD, GAINWARD RTX2060 6GB, Oculus Rift S, MS FFB2 Sidewinder + Warthog Throttle Quadrant, Saitek Pro rudder pedals.
Chann3l Posted October 2, 2015 Posted October 2, 2015 The training lessons are WIP right now. We will release them ASAP. Excellent news. This thing is a joy to fly.
elchacal Posted October 2, 2015 Posted October 2, 2015 The training lessons are WIP right now. We will release them ASAP. Excellent! :thumbup: [sIGPIC][/sIGPIC]
J3ST3R Posted October 3, 2015 Posted October 3, 2015 How do I turn on the HUD? INTEL i9 9900k @ 5Ghz, Asus Z390 strix ROG, 32gb 3200mhz Ram, Nvidia GTX 1080Ti, Corsair RM850i, Corsair H110i,, HP REVERB, Win 10 64bit. [sIGPIC][/sIGPIC]
J3ST3R Posted October 3, 2015 Posted October 3, 2015 Never mind, found the switch LOL INTEL i9 9900k @ 5Ghz, Asus Z390 strix ROG, 32gb 3200mhz Ram, Nvidia GTX 1080Ti, Corsair RM850i, Corsair H110i,, HP REVERB, Win 10 64bit. [sIGPIC][/sIGPIC]
Danzer Posted February 15, 2016 Posted February 15, 2016 The training lessons are WIP right now. We will release them ASAP. Hello Groove, I assume that the training missions will be a part of the 1.5.3 update? Would be Awesome.. :music_whistling: Dell XPS 8700: 28" DELL S2817Q 3840pi, i7-4790 3.6 GHz, 16 GB RAM, RTX 2070 Super, Windows 10, SSD 1 TB, HDD 2 TB + 32 GB SSD, TM HOTAS, Oculus Rift S. Repetition is the Mother of All Skills:matrix: [sIGPIC]<a href="http://www.flyfighterjet.com/" target="_blank"></a>[/sIGPIC]
Danzer Posted February 17, 2016 Posted February 17, 2016 WooHoo, I just did my first L39C flight in 1.5.3....... Awesome! There....there....... There are also training modules and the L39ZA is there too..COOL... Oh, am I a bit to much enthusiastic or what? Dell XPS 8700: 28" DELL S2817Q 3840pi, i7-4790 3.6 GHz, 16 GB RAM, RTX 2070 Super, Windows 10, SSD 1 TB, HDD 2 TB + 32 GB SSD, TM HOTAS, Oculus Rift S. Repetition is the Mother of All Skills:matrix: [sIGPIC]<a href="http://www.flyfighterjet.com/" target="_blank"></a>[/sIGPIC]
Recommended Posts