winchesterdelta1 Posted December 25, 2015 Posted December 25, 2015 Hey. There. Lets start a how to post. My first questions. - How to turn RWR on? - How to find targets. (My Radar is on and i can slew around. But it doe snot show any contacts.) - How to select missiles? Go in close, and when you think you are too close, go in closer.
il_corleone Posted December 25, 2015 Posted December 25, 2015 Hey. There. Lets start a how to post. My first questions. - How to turn RWR on? - How to find targets. (My Radar is on and i can slew around. But it doe snot show any contacts.) - How to select missiles? Hello Winchester, to turn your RWR on, you must enable it, it is behind the INS, heading to the back of the plane. https://youtu.be/LlRkq41t9ks?t=65 1:05 Mark, ECM, RWR... in that panel To find targets, you must first, warm it, 1st click, second click and the radar will be on Silence mode, and the third one will get your radar working. Take note that Elevation of the antenna is not working To select missiles you must turn your Master arm on, PCA panel on your left, and then, in the line below MAG = MAgic 530= Super 530D and you must read the manual, its everything there, Salute
winchesterdelta1 Posted December 25, 2015 Author Posted December 25, 2015 Thank you. I found the RWR. But about the radar. What button to click to warm it? Any pictures? Go in close, and when you think you are too close, go in closer.
winchesterdelta1 Posted December 25, 2015 Author Posted December 25, 2015 I see put the Radar power switch to EM. Go in close, and when you think you are too close, go in closer.
XeNoise Posted December 25, 2015 Posted December 25, 2015 Another question: If i get a black screen due to for example to high Gs, how comes that i can't do anything about it? It just stays black until i touch the ground..
cameleon33 Posted December 25, 2015 Posted December 25, 2015 Up to a point, I think you pass out. That is why the screen stays black. You have to stop pulling Gs before it's too late :) [sIGPIC][/sIGPIC]
Zeus67 Posted December 25, 2015 Posted December 25, 2015 Another question: If i get a black screen due to for example to high Gs, how comes that i can't do anything about it? It just stays black until i touch the ground.. That's because you, as the pilot, have fainted and thus cannot control the aircraft until you wake up. "Programming today is a race between software engineers striving to build bigger and better idiot-proof programs, and the Universe trying to produce bigger and better idiots. So far, the Universe is winning." "The three most dangerous things in the world are a programmer with a soldering iron, a hardware type with a program patch and a user with an idea."
winchesterdelta1 Posted December 25, 2015 Author Posted December 25, 2015 hmm it still cant see targets. Im doing something wrong Go in close, and when you think you are too close, go in closer.
QuiGon Posted December 25, 2015 Posted December 25, 2015 (edited) To use the radar you need to turn it on by clicking the bottom most switch on the right side of the radar screen and on the left consile you need to turn the knob with the open triangle on it to EM I think. Also make sure to turn the radar range up, because default is just 10nm I think. Edited December 25, 2015 by QuiGon Intel i7-12700K @ 8x5GHz+4x3.8GHz + 32 GB DDR5 RAM + Nvidia Geforce RTX 2080 (8 GB VRAM) + M.2 SSD + Windows 10 64Bit DCS Panavia Tornado (IDS) really needs to be a thing!
QuiGon Posted December 25, 2015 Posted December 25, 2015 How to shut the engine down? Intel i7-12700K @ 8x5GHz+4x3.8GHz + 32 GB DDR5 RAM + Nvidia Geforce RTX 2080 (8 GB VRAM) + M.2 SSD + Windows 10 64Bit DCS Panavia Tornado (IDS) really needs to be a thing!
Zeus67 Posted December 25, 2015 Posted December 25, 2015 How to shut the engine down? There is a brown button by the throttle side, on the seat side. That is the engine shut-down button. 1 "Programming today is a race between software engineers striving to build bigger and better idiot-proof programs, and the Universe trying to produce bigger and better idiots. So far, the Universe is winning." "The three most dangerous things in the world are a programmer with a soldering iron, a hardware type with a program patch and a user with an idea."
winchesterdelta1 Posted December 25, 2015 Author Posted December 25, 2015 OK i think i found it. The radar Illumination switch needs to be on as well. Go in close, and when you think you are too close, go in closer.
QuiGon Posted December 25, 2015 Posted December 25, 2015 There is a brown button by the throttle side, on the seat side. That is the engine shut-down button. :thumbup: Intel i7-12700K @ 8x5GHz+4x3.8GHz + 32 GB DDR5 RAM + Nvidia Geforce RTX 2080 (8 GB VRAM) + M.2 SSD + Windows 10 64Bit DCS Panavia Tornado (IDS) really needs to be a thing!
XeNoise Posted December 25, 2015 Posted December 25, 2015 That's because you, as the pilot, have fainted and thus cannot control the aircraft until you wake up. Uhhh that will make me to think twice before pulling master Gs :lol: Was expecting it to be like in fc3 aircrafts where you can pass out for maybe 5-10 max 15 seconds. Thanks master :book:
GGTharos Posted December 25, 2015 Posted December 25, 2015 You pass out for between 24 and 80 sec in fc3 AC IIRC. Could be wrong though. [sIGPIC][/sIGPIC] Reminder: SAM = Speed Bump :D I used to play flight sims like you, but then I took a slammer to the knee - Yoda
Call911 Posted December 26, 2015 Posted December 26, 2015 How to..start up check list. Tried to copy the manuals checklist an add it too the kneeboard but no luck there.
anlq Posted December 26, 2015 Posted December 26, 2015 Oh, you guys are lucky to have M2000C at this time. Im still struggling with "how to download M2000C using Module Manager" because MM working like sh*t, I can't login. How annoying.
Farlander Posted December 26, 2015 Posted December 26, 2015 Question.. Why does the mirage not lock to the centre of the diamond on the ground? when i try to select a target on the ground i have to put the reticle somewhere between the centre and the top of the diamond to get get it perfectly centered on the target.. Hard to explain, i tried my best..
Zeus67 Posted December 26, 2015 Posted December 26, 2015 Question.. Why does the mirage not lock to the centre of the diamond on the ground? when i try to select a target on the ground i have to put the reticle somewhere between the centre and the top of the diamond to get get it perfectly centered on the target.. Hard to explain, i tried my best.. We'll check. "Programming today is a race between software engineers striving to build bigger and better idiot-proof programs, and the Universe trying to produce bigger and better idiots. So far, the Universe is winning." "The three most dangerous things in the world are a programmer with a soldering iron, a hardware type with a program patch and a user with an idea."
LT.Helo Posted December 26, 2015 Posted December 26, 2015 Hey, with a friend we are stuck on a very simple task ... How do you make your plane able to turn on the taxi ( INSER button on A10-c ) ? There is only the wheel brake option . Thx ...
jojo Posted December 26, 2015 Posted December 26, 2015 Question.. Why does the mirage not lock to the centre of the diamond on the ground? when i try to select a target on the ground i have to put the reticle somewhere between the centre and the top of the diamond to get get it perfectly centered on the target.. Hard to explain, i tried my best.. What are you trying to do ? AG designation for bombing ? Mirage fanatic ! I7-7700K/ MSI RTX3080/ RAM 64 Go/ SSD / TM Hornet stick-Virpil WarBRD + Virpil CM3 Throttle + MFG Crosswind + Reverb G2. Flickr gallery: https://www.flickr.com/gp/71068385@N02/728Hbi
Live-Dimension Posted December 26, 2015 Posted December 26, 2015 Hey, with a friend we are stuck on a very simple task ... How do you make your plane able to turn on the taxi ( INSER button on A10-c ) ? There is only the wheel brake option . Thx ... Enable nose wheel steering with S. There's likely more to it but that'll get you going for now :)
Croaker47 Posted December 26, 2015 Posted December 26, 2015 S by default I think I saw in another thread. EDIT: Live beat me to it.
nomdeplume Posted December 26, 2015 Posted December 26, 2015 Enable nose wheel steering with S. There's likely more to it but that'll get you going for now :) And it's listed in controls as "Nosewheel Steering Button / IFF" in the HOTAS category, if you want to bind a button to it.
stephane Posted December 26, 2015 Posted December 26, 2015 [ame] [/ame] M2000C tutorial on another game but ..same plane so ...
.thumb.webp.f2588eefb42554f354bfcfd678dbcdc0.webp){kind=logo}
Recommended Posts