lmp Posted September 7, 2017 Posted September 7, 2017 I'm using my twcs throttle HAT to control the right knobs and while this works well for moving the cursor on the map, switching pages is nearly impossible. A single short press of the button will move the knob several clicks.
gospadin Posted September 8, 2017 Posted September 8, 2017 (edited) Reported, thanks. Edited September 13, 2017 by gospadin My liveries, mods, and missions for DCS:World M-2000C English Cockpit | Extra Beacons Mod | Nav Kneeboard | Community A-4E
Gizzy Posted September 11, 2017 Posted September 11, 2017 Realising that it's being looked at but Just for info, setting rotaries pulse rate as low as 8ms, it's still way too sensitive and inoperable (on the rotary switch... screen mouse scroll is fine) ... none the less a great module bolt on...
horus-DCS Posted September 12, 2017 Posted September 12, 2017 Knobs very sensitive when controlled by joystick buttons Same here. The display has been exported on the external monitor and the cougar MFD is doing its job for controlling switches...except these L/R knobs. I know the trick tweaking gain parameters in clickabledata file, and it definitely make the rotation slow, but it's still too fast at the minimum working value. Under the value the knobs won't rotate at all. Sent from my iPhone using Tapatalk
ralgha Posted September 13, 2017 Posted September 13, 2017 Also ran into this, looking forward to a fix.
heloguy Posted October 21, 2017 Posted October 21, 2017 Seems like this function shouldn’t be controlled by the amount of time the button is pressed, but instead by the number of times the button is pressed. The real life 430 has a notch feeling in the knobs, so one notch equal one ‘click’ of movement so to speak. i9 12900k @ 4.9ghz, 64gb RAM Nvidia RTX 3090 Windows 11 x64 Pimax Crystal VP Force Rhino w/RS F16GRH, Virpil TCS Rotor Plus AH-64 Collective, BRD F1 Pedals, WH Throttle, FSSB R3 w/WH Grip, PointCTRL v2
ody81 Posted October 22, 2017 Posted October 22, 2017 Seems like this function shouldn’t be controlled by the amount of time the button is pressed, but instead by the number of times the button is pressed. The real life 430 has a notch feeling in the knobs, so one notch equal one ‘click’ of movement so to speak. But for those who want to use a button or hat switch, setting a waypoint could be a time consuming nightmare.
heloguy Posted October 23, 2017 Posted October 23, 2017 But for those who want to use a button or hat switch, setting a waypoint could be a time consuming nightmare. Would a compromise be (for those who wish to use encoders) to add a function like ‘turn left outer knob one click’? i9 12900k @ 4.9ghz, 64gb RAM Nvidia RTX 3090 Windows 11 x64 Pimax Crystal VP Force Rhino w/RS F16GRH, Virpil TCS Rotor Plus AH-64 Collective, BRD F1 Pedals, WH Throttle, FSSB R3 w/WH Grip, PointCTRL v2
ody81 Posted October 23, 2017 Posted October 23, 2017 Would a compromise be (for those who wish to use encoders) to add a function like ‘turn left outer knob one click’? We'll see what happens, with that in mind though it's hard to please everyone. Leave it to the boffins :)
horus-DCS Posted October 23, 2017 Posted October 23, 2017 Would a compromise be (for those who wish to use encoders) to add a function like ‘turn left outer knob one click’? I think this is a good idea. Please DEVs, consider this option! Sent from my iPhone using Tapatalk
some1 Posted October 23, 2017 Posted October 23, 2017 I think ABRIS in Ka-50 has the same issue. Never fixed. Hardware: VPForce Rhino, FSSB R3 Ultra, Virpil WarBRD, Hotas Warthog, Winwing F15EX, Slaw Rudder, GVL224 Trio Throttle, Thrustmaster MFDs, Saitek Trim wheel, Trackir 5, Quest Pro
horus-DCS Posted October 23, 2017 Posted October 23, 2017 I think ABRIS in Ka-50 has the same issue. Never fixed. ABRIS knobs sensitivities can be fixed by editing gain values in clickabledata.lua. But the trick doesn't work for NS430. Sent from my iPhone using Tapatalk
Chic Posted October 25, 2017 Posted October 25, 2017 (edited) I'm using my twcs throttle HAT to control the right knobs and while this works well for moving the cursor on the map, switching pages is nearly impossible. A single short press of the button will move the knob several clicks. I've modded the NS430 default.lua to have the Right & Left, Large & Small rotary knobs output a single momentary pulse. Now getting errorless one:one responses from my rotary encoders. Should work with any type of controller input. JSGME/OVGME ready.GPS Rotary Encoder Fix.rar Edited October 25, 2017 by Chic 2 1 A Co, 229th AHB, 1st Cav Div ASUS Prime Z370-A MB, Intel Core i7 8700K 5.0GHz OC'd, RTX 3090, 32GB DDR4, 1TB SSD, Win 10 Samsung 65" 4K Curved Display (Oculus Rift occaisionally), Track IR5, VoiceAttack, Baur's BRD-N Cyclic base/Virpil T-50CM Grip, UH-1h Collective by Microhelis & OE-XAM Pedals. JetSeat & SimShaker for Aviators. JUST CHOPPERS
heloguy Posted October 27, 2017 Posted October 27, 2017 This works great Chic, thanks for doing the leg work on that! i9 12900k @ 4.9ghz, 64gb RAM Nvidia RTX 3090 Windows 11 x64 Pimax Crystal VP Force Rhino w/RS F16GRH, Virpil TCS Rotor Plus AH-64 Collective, BRD F1 Pedals, WH Throttle, FSSB R3 w/WH Grip, PointCTRL v2
horus-DCS Posted October 28, 2017 Posted October 28, 2017 I've modded the NS430 default.lua to have the Right & Left, Large & Small rotary knobs output a single momentary pulse. Now getting errorless one:one responses from my rotary encoders. Should work with any type of controller input. JSGME/OVGME ready. Thanks mate! This works great.
Chic Posted October 30, 2017 Posted October 30, 2017 Glad its workin out. Thanks for the feedback guys. A Co, 229th AHB, 1st Cav Div ASUS Prime Z370-A MB, Intel Core i7 8700K 5.0GHz OC'd, RTX 3090, 32GB DDR4, 1TB SSD, Win 10 Samsung 65" 4K Curved Display (Oculus Rift occaisionally), Track IR5, VoiceAttack, Baur's BRD-N Cyclic base/Virpil T-50CM Grip, UH-1h Collective by Microhelis & OE-XAM Pedals. JetSeat & SimShaker for Aviators. JUST CHOPPERS
zerocoolant Posted December 31, 2017 Posted December 31, 2017 +1 to this issue. Having trouble using the VRInsight MSPanel that worked so well for the Mig-15's controls. NS430 knobs skip two to three clicks for every pulse.
Razor18 Posted May 9, 2018 Posted May 9, 2018 Any news about this? Still can't assign knob incr. or decr. function to any button, or any keyboard key for that matter, cause it sends repeated pulses too fast to have one step for one key press...
ody81 Posted May 10, 2018 Posted May 10, 2018 (edited) Any news about this? Still can't assign knob incr. or decr. function to any button, or any keyboard key for that matter, cause it sends repeated pulses too fast to have one step for one key press... I can say that it is known and on the drawing board :thumbup: For the time being though there is a lovely lua script in this very thread somebody has made that will ease your troubles :joystick: Edit: Dammit, and the lua file isn't on this thread and I don't know where it is, got you covered anyway though. This is a link to the file in JSGME/OVGME format, or you can just drag, drop and replace if you want. I do not take credit for this, I just can't remember who exactly made it. https://www.dropbox.com/sh/c80qdjo17fcknxf/AABBQiWyHkffdX_1sOFZ9toPa?dl=0 Edited May 10, 2018 by ody81 Dammit!
Chic Posted May 10, 2018 Posted May 10, 2018 (edited) I can say that it is known and on the drawing board :thumbup: For the time being though there is a lovely lua script in this very thread somebody has made that will ease your troubles :joystick: Edit: Dammit, and the lua file isn't on this thread and I don't know where it is, got you covered anyway though. This is a link to the file in JSGME/OVGME format, or you can just drag, drop and replace if you want. I do not take credit for this, I just can't remember who exactly made it. https://www.dropbox.com/sh/c80qdjo17fcknxf/AABBQiWyHkffdX_1sOFZ9toPa?dl=0 Post #13. Edited May 10, 2018 by Chic A Co, 229th AHB, 1st Cav Div ASUS Prime Z370-A MB, Intel Core i7 8700K 5.0GHz OC'd, RTX 3090, 32GB DDR4, 1TB SSD, Win 10 Samsung 65" 4K Curved Display (Oculus Rift occaisionally), Track IR5, VoiceAttack, Baur's BRD-N Cyclic base/Virpil T-50CM Grip, UH-1h Collective by Microhelis & OE-XAM Pedals. JetSeat & SimShaker for Aviators. JUST CHOPPERS
ody81 Posted May 10, 2018 Posted May 10, 2018 Post #13. Sorry! I missed that completely. Some days... :helpsmilie: Good work Chic, very useful.
Chic Posted May 10, 2018 Posted May 10, 2018 Sorry! I missed that completely. Some days... :helpsmilie: Welcome to my world! Thank you. A Co, 229th AHB, 1st Cav Div ASUS Prime Z370-A MB, Intel Core i7 8700K 5.0GHz OC'd, RTX 3090, 32GB DDR4, 1TB SSD, Win 10 Samsung 65" 4K Curved Display (Oculus Rift occaisionally), Track IR5, VoiceAttack, Baur's BRD-N Cyclic base/Virpil T-50CM Grip, UH-1h Collective by Microhelis & OE-XAM Pedals. JetSeat & SimShaker for Aviators. JUST CHOPPERS
Strut Posted May 10, 2018 Posted May 10, 2018 Chic, whats happened to you mate, youve become a geek !!!!!!:geek: Great job mate, keep it up ! Regards DL available skins here: https://www.digitalcombatsimulator.com/en/files/?CREATED_BY=Strut Pictures of my Skins here: https://imgur.com/a/bOQyQqW [sIGPIC][/sIGPIC] Win10 64bit, Intel® Core i7-5820K CPU OC @ 4.50GHz x6, X99A GAMING PRO CARBON, MSI RTX 2080 TI GAMING X TRIO 11Gb, 32GB DDR4 RAM, SSD 960 EVO250GB, SSD 850 EVO 500GB, JetSeat, MFG Crosswind Pedals, VPC Mongoose T-50, TMWH, DSD ButtonBox, Pimax 5k XR/BE
Chic Posted May 10, 2018 Posted May 10, 2018 Nah, still a grunt. My Man. A Co, 229th AHB, 1st Cav Div ASUS Prime Z370-A MB, Intel Core i7 8700K 5.0GHz OC'd, RTX 3090, 32GB DDR4, 1TB SSD, Win 10 Samsung 65" 4K Curved Display (Oculus Rift occaisionally), Track IR5, VoiceAttack, Baur's BRD-N Cyclic base/Virpil T-50CM Grip, UH-1h Collective by Microhelis & OE-XAM Pedals. JetSeat & SimShaker for Aviators. JUST CHOPPERS
Razor18 Posted May 10, 2018 Posted May 10, 2018 Hay Chic, can you make a lua to be able to assign it to a key or button too? Now you can't because it is still too fast of a change instead of a step by step. Sent you a PM about it on 1st Cav too...
Recommended Posts