Jump to content

Recommended Posts

Posted

No. Stock clean install 2.5 . Was working then came this latest 2.5.015085 and it all went caput! I did repair. No change. This update threw everything over the cliff. No doubt ED is working on it.

I did gt KA-50 to fly in Free Flight: Nevada. But everything else is frozen.

Posted

I had three crashes yesterday after the patch. Vanilla install does crash as much as if I move my mods back. This release is pretty unstable in VR.

 

Cockpit, when it loads, loads extremly slow. Mission take felt 5min to start.

X-Plane 11.5x / DCS 2.5.6 / P3Dv5 / Aerofly FS 2 / War Thunder

 

Win10-x64 | ASUS Z390 Maximus VI | Intel i7-9700K @3.6GHz | Corsair Vengeance LPX 32 GB DDR4 | 6TB SSD Samsung 850 Pro | 2TB M2 PCI 4x | ASUS GTX 1080 ROG STRIX 8GB DDR5X | TM Hotas Warthog | Saitek Combat Pedals | Oculus Rift S

  • ED Team
Posted

Long load times are due to first load of shaders, and current memory and optimisations issues.

 

ED is currently working on a hotfix for 2.5.015085 to address the strange issues and crashes being seen by some users.

 

When I have more news I will pass it on.

 

Thanks

smallCATPILOT.PNG.04bbece1b27ff1b2c193b174ec410fc0.PNG

Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status

Windows 11, NVIDIA MSI RTX 3090, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 64GB DDR @3200, ASUS ROG Strix Z490-F Gaming, PIMAX Crystal

Posted

Same here. Pressing FLY freezes DCS with the Mi-8.

Current specs: Windows 10 64bit, i7-7700K @ 4.8 Ghz, 32 GB RAM, 1 To SSD, RTX2070-Super, TrackIR 5, TM Warthog, TM T.Flight Rudder Pedals

Posted

Same, can't play the game since the update :( I'll just have to wait for a fix, or rollback the update somehow I guess. Never had a crash in DCS like this before, so that's a pretty good track record, I'm sure they are on it.

Posted
Long load times are due to first load of shaders, and current memory and optimisations issues.

 

ED is currently working on a hotfix for 2.5.015085 to address the strange issues and crashes being seen by some users.

 

When I have more news I will pass it on.

 

Thanks

 

:thumbup:

X-Plane 11.5x / DCS 2.5.6 / P3Dv5 / Aerofly FS 2 / War Thunder

 

Win10-x64 | ASUS Z390 Maximus VI | Intel i7-9700K @3.6GHz | Corsair Vengeance LPX 32 GB DDR4 | 6TB SSD Samsung 850 Pro | 2TB M2 PCI 4x | ASUS GTX 1080 ROG STRIX 8GB DDR5X | TM Hotas Warthog | Saitek Combat Pedals | Oculus Rift S

Posted

I have problems with FC3 after the update:

1. on every startup, I get asked for a key for the F-15C module, when I ignore it says F-15C will be deactivated but I then can still enter the F-15C in-game

2. but the F-15 and Su-33 are unusable, F-15 goes to 86% throttle and stays there, can't steer, snapviews aren't like before, stick is fully deflected right and stays there, brakes axes don't work. When I check in 'adjust controls' all switches and axes (stick, throttle, brakes) work as intended.

3. Su-27 may be working better but crashes after a few seconds. Su-33 and 27 are now askew on the ground or the carrier, turned between 30-90° to the left

4. Other modules (A-10, Ka-50, Huey) work normally for me

5. mods or no mods, repair, clean, no difference

"[...] because, basically, in this day and age, if you get to the merge and no one's died - it's not good for anybody." - Keith 'Okie' Nance
"Nun siegt mal schön!" - Theodor Heuss, September 1958

"Nobody has any intention of building a wall." - Walter Ulbricht, June 1961
"Russia has no plans to invade either Ukraine or any other country.
" - Vladimir Chizhov, Russia's ambassador to the EU, January 2022

Posted

So I did reinstall. So things work , many don't

SU-25T appears to work. But if I fly 25T in Georgia, Free Flight. Then free flight again , in NTTR, DCS asks me to authorize NTTR? Go figure.

KA-50 appears to work.

FC3 does not work

A-10C appears OK, for now.

F-5E is completely dead. DCS freezes as soon FLY is pressed. In InstantAction/TakeOff in Georgia, sim starts, but a/c is dead with all warning lights lit. AKA Xmas tree. The barrometric altimeter reads 98570 feet.

Mig-21Bis is a freeze, I can hear the engine, but DCS is otherwise frozen.

 

I still love DCS, and remind myself that it is a beta. Like a cistertian monk. With a flaggelum whip. "Its a beta" SNAP!, "Its a beta" SNAPP!

Posted

You might try renaming your saved games install Dave. If it runs better, just slowly add back in the original files until you can put your finger on the culprit, then give that a good flagellating instead ;)

Posted

Problem with the Fw190:

Since the update to 2.5.0.15085 the gear switch of the Fw190 is at the 'ein' position, so as soon as electricity is switched on, the gear retracts on the ground.

Easy enough when doing the cold start (just press 'aus' first) but the instant action take-off mission is unplayable this way.

From cold start, I can't start the engine anymore; doing the same procedure as before the update, the engine splutters but doesn't run - has the startup procedure been changed?

Thanks!

"[...] because, basically, in this day and age, if you get to the merge and no one's died - it's not good for anybody." - Keith 'Okie' Nance
"Nun siegt mal schön!" - Theodor Heuss, September 1958

"Nobody has any intention of building a wall." - Walter Ulbricht, June 1961
"Russia has no plans to invade either Ukraine or any other country.
" - Vladimir Chizhov, Russia's ambassador to the EU, January 2022

Posted
I have problems with FC3 after the update:

1. on every startup, I get asked for a key for the F-15C module, when I ignore it says F-15C will be deactivated but I then can still enter the F-15C in-game

2. but the F-15 and Su-33 are unusable, F-15 goes to 86% throttle and stays there, can't steer, snapviews aren't like before, stick is fully deflected right and stays there, brakes axes don't work. When I check in 'adjust controls' all switches and axes (stick, throttle, brakes) work as intended.

3. Su-27 may be working better but crashes after a few seconds. Su-33 and 27 are now askew on the ground or the carrier, turned between 30-90° to the left

4. Other modules (A-10, Ka-50, Huey) work normally for me

5. mods or no mods, repair, clean, no difference

 

same here

Posted
Long load times are due to first load of shaders, and current memory and optimisations issues.

 

ED is currently working on a hotfix for 2.5.015085 to address the strange issues and crashes being seen by some users.

 

When I have more news I will pass it on.

 

Thanks

Great news on the hotfix, I think long load times on multiplayer servers are also due to unit object synchronization too (im pretty sure of it)

Developer of DDCS MP Engine, dynamicdcs.com

https://forums.eagle.ru/showthread.php?t=208608

Posted
I have problems with FC3 after the update:

1. on every startup, I get asked for a key for the F-15C module, when I ignore it says F-15C will be deactivated but I then can still enter the F-15C in-game

2. but the F-15 and Su-33 are unusable, F-15 goes to 86% throttle and stays there, can't steer, snapviews aren't like before, stick is fully deflected right and stays there, brakes axes don't work. When I check in 'adjust controls' all switches and axes (stick, throttle, brakes) work as intended.

3. Su-27 may be working better but crashes after a few seconds. Su-33 and 27 are now askew on the ground or the carrier, turned between 30-90° to the left

4. Other modules (A-10, Ka-50, Huey) work normally for me

5. mods or no mods, repair, clean, no difference

 

 

Latest update fixed most of my issues, thank you very much ED!

 

The only thing still happening was the key request for the F-15C module at program start - I have now actively disabled the F-15C in my module manager which has also fixed that - I can still use the F-15C in game as it is FC3

"[...] because, basically, in this day and age, if you get to the merge and no one's died - it's not good for anybody." - Keith 'Okie' Nance
"Nun siegt mal schön!" - Theodor Heuss, September 1958

"Nobody has any intention of building a wall." - Walter Ulbricht, June 1961
"Russia has no plans to invade either Ukraine or any other country.
" - Vladimir Chizhov, Russia's ambassador to the EU, January 2022

Posted
2.5.0.15184.338 seems to have been pushed to open beta

 

please update and try the fix

 

thanks

 

A-10C, MI-8 after hotfix work. Mig-21 is still freezing after I click to fly. I did fix the DCS, clean it up. I have reinstalled the Mig-21 but the problem still exists.

  • ED Team
Posted
A-10C, MI-8 after hotfix work. Mig-21 is still freezing after I click to fly. I did fix the DCS, clean it up. I have reinstalled the Mig-21 but the problem still exists.

 

can you try the mig again, then attach your dcs.log

 

if you like open a new post and we can focus on it.

smallCATPILOT.PNG.04bbece1b27ff1b2c193b174ec410fc0.PNG

Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status

Windows 11, NVIDIA MSI RTX 3090, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 64GB DDR @3200, ASUS ROG Strix Z490-F Gaming, PIMAX Crystal

Posted

New fix caused my 3 D Objects in Nevada Map not to load?

System:Motherboard Asus ROG Strix Z390-E,Asus ROG GeForce RTX 2080Ti OC, GPU, 32GB Corsair Vengeance DDR4 Ram, Intel i9 9900K @ 5 GHz , cooled by NZXT Kraken X52, Acer XB270HU G-Sinc monitor, Windows 10 Pro, Warthog joystick and throttle with wasy extension, VBK Gunfighter Pro and MCG Pro,MFG Rudder, running on a dedicated 1TB Samsung 970 Pro M2 Nvme , Super Wheel Stand Pro, with a HP Reverb G2

Posted

The building are there, just not visible. How do I know?

i9-9900K 4,9Ghz, 2080ti, 32Gb, 1Gb m.2, Index, WinWing throttle, Baur BRD-N, Crosswind pedals, Orbwiever and tm mfd`s, all in a Hornet simpit.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...