Jump to content

FA-18C difficulty in the internal management of the cockpit


Recommended Posts

Posted

Dear DCS Pilots,

 

I'm sorry for the banality of the problem, but I can not manage the movement inside the cockpit and the clickable mouse at the same time. Maybe it's an incorrect setting.

 

I saw on a video tutorial of Eagle Dynamics that the movement inside the cockpit is very easy and does not preclude the ability to click the commands.

 

On the contrary, I have to continuously switch LAlt + C to move from mouse movement to clickable mouse.

 

 

Why does this difference?

 

 

Thanks

Posted

Most people are using TrackIR or some other form of headtracking (VR works too). Thats why you see a lot of people have no trouble moving the camera around while clicking on stuff at the same time.

Posted
but I can not manage the movement inside the cockpit and the clickable mouse at the same time. Maybe it's an incorrect setting.

Same here, with TrackIR i can't keep the mouse in place, or better, keep the picture where the mouse is. Most of the time I need to pause TRackIR, flip the switches or turn the dials and then unpause. Creating a dead zone helped only for the part where the headtracker is in the dead zone.

Win11 Pro 64-bit, Ryzen 5800X3D, Corsair H115i, Gigabyte X570S UD, EVGA 3080Ti XC3 Ultra 12GB, 64 GB DDR4 G.Skill 3600. Monitors: LG 27GL850-B27 2560x1440 + Samsung SyncMaster 2443 1920x1200, HOTAS: Warthog with Virpil WarBRD base, MFG Crosswind pedals, TrackIR4, Rift-S, Elgato Streamdeck XL.

Personal Wish List: A6 Intruder, Vietnam theater, decent ATC module, better VR performance!

Posted
Which TrackIR brand you would recommend to me ?

 

I’ve been using the track clip pro for years and it’s great if you use headphones as it clips onto them.

It’s a little delicate and you’ll always want to put your headphones down so you don’t damage the sensors.

I think I’m using the trachiR 5 software. It’s been a long time since I thought about it, maybe I’ve got the 4 with 5 software?

Dunno.

Posted

I‘m using my TrackIR for more than 10 years now and still have the original that I purchased back then running with the latest software (v5 IIRC). A very faithfull device which has probably seen more than 3000hrs of usage without any glitch! Must have for flight simulation (unless you go for VR of course).

Posted

trackhat.org is a budget option. Haven't had any problems with it. Easy set up and pitch, yaw, roll, x, y and z axis can all be adjusted.

[sIGPIC][/sIGPIC]

Posted

Which gives the better tracking without glitching; the clip pro or the three point hat "assembly"? Or it it solely dependent on the software settings and elimination of outside light sources?

Clevo laptop: P650HS-G, i7-7820HK 3.9Hz max (+overclock capable), Liquid Metal pasted, 16GB DDR4/2400MHz, 15.6 G-Sync 120Hz 5ms panel, nVidia GTX 1070 w/8GDDR5, 10Pro

Installed: DCS World, DCS World 2 with Nevada, F-5; Purchased: F/A-18C

Posted

Trackir all the way

 

also the feeling is more real and u look and press something

OS: Win10 home 64bit*MB: Asus Strix Z270F/

CPU: Intel I7 7700k /Ram:32gb_ddr4

GFX: Nvidia Asus 1080 8Gb

Mon: Asus vg2448qe 24"

Disk: SSD

Stick: TM Warthog #1400/Saitek pro pedals/TIR5/TM MFDs

[sIGPIC][/sIGPIC]

Posted (edited)
Which gives the better tracking without glitching; the clip pro or the three point hat "assembly"? Or it it solely dependent on the software settings and elimination of outside light sources?

 

I just found this old post when googling which is better.

 

https://forums.naturalpoint.com/viewtopic.php?t=6493

 

Worth a read of all 15 posts, I’m not sure if anything has changed much since then in terms of concept.

 

I wouldn’t like to wear a hat and headphones...

Edited by danny875
Link
Posted

just wanted to chime into say the Smooth preset in TrackIR software works well for me, if its too sensitive its hard to click sometimes.

 

Trackclip pro is considered active IR as it emits IR light. trackIR hat clip is passive and just reflects light emitted by the camera and is considered less accurate. in my experience. it was a giant pain in the ass to use the trackclip pro and it's assembly is just about the cheapest you can possibly imagine. i use the hat option and it's much better, hat and headphones is better than headphones and a power cord and clip thingy that is made like crap.

Antec P280 | Gigabyte Z370 Aorus 7 | i7 8086K @ 4.9Ghz on Thermaltake 240mm CLC | 32GB Kingston HyperX DDR4 @ 2400Mhz | Asus Strix Vega 64 8GB | Asus Strix XG35VQ w/ FreeSync

 

Samsung 960EVO NVMe for DCS and Windows 10 w/ other storage for stuff

 

TrackIR 5, TM WH Stick + Throttle + TM T-Flight Rudder Pedals

Posted
just wanted to chime into say the Smooth preset in TrackIR software works well for me, if its too sensitive its hard to click sometimes.

 

Trackclip pro is considered active IR as it emits IR light. trackIR hat clip is passive and just reflects light emitted by the camera and is considered less accurate. in my experience. it was a giant pain in the ass to use the trackclip pro and it's assembly is just about the cheapest you can possibly imagine. i use the hat option and it's much better, hat and headphones is better than headphones and a power cord and clip thingy that is made like crap.

 

 

I hate wearing a cap especially in summer so I have the hat clip zip-tied to the top of my headphones. Looks a bit funny but works well :lol:

Posted

good alternative at cheap price is EDtracker which I'd like to switch over from my trackir .

 

http://www.edtracker.co.uk/shop

  • CPU : Intel i7 8700k@5.0ghz cooled by Noctua NH-D15 / Motherboard:Asorck Z370 Taichi / RAM: 32GB GSkill TridentZ @3600mhz / SSD: 500GB Nvme Samsung 970 evo+1 TB Sabrent Nvme M2 / GPU:Asus Strix OC 2080TI / Monitor: LG 34KG950F Ultrawide / Trackir 5 proclip/ VIRPIL CM2 BASE + CM2 GRIP + F148 GRIP + 200M EXTENSION /VKB T-Rudder MKIV rudder /Case: Fractal Design R6 Define black

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...