Blue73 Posted May 3, 2019 Author Posted May 3, 2019 Hi Gruman, Which part specifically? Just the handle ends, handles, handles and pivot or the entire mechanism with HE sensors and magnets? Any chance for the STL file on the Hook and landing gear module? :book: Thanks. :thumbup:
Gruman Posted May 3, 2019 Posted May 3, 2019 The entire mechanism if possible. :music_whistling: Thanks, and if you decide to share it, no hurry :smilewink: Intel I9 10900k @5.1GHz | MSI MEG Z490 Unify | Corsair Vengeance 64GB - 3600MHz | EVGA RTX 3090 FTW3 VPC T-50 Base /w Viper & Hornet Grip | VPC Rotor TCS Pro w/ Hawk-60 Grip | TM TPR LG C2 42" | Reverb G2 | TIR 5 | PointCtrl | OpenKneeboard
Hansolo Posted May 6, 2019 Posted May 6, 2019 @Blue73 while looking for your power layout for Mr. Burns I just realized how many posts in your thread I had not seem. Simply jaw breaking and extraordinary work there sir. Hats off to you for your creations, sir :thumbsup: Cheers Hans 132nd Virtual Wing homepage & 132nd Virtual Wing YouTube channel My DCS-BIOS sketches & Cockpit Album
Blue73 Posted May 7, 2019 Author Posted May 7, 2019 Thanks Hans, I appreciate your comments! cheers John @Blue73 while looking for your power layout for Mr. Burns I just realized how many posts in your thread I had not seem. Simply jaw breaking and extraordinary work there sir. Hats off to you for your creations, sir :thumbsup: Cheers Hans
Blue73 Posted May 8, 2019 Author Posted May 8, 2019 (edited) Hi Everyone, I had to shift the bottom row of buttons back 4mm, it didn't look right, which meant a complete reprint of the UFC. Here is the completed module (except wiring). I've used plexiglass for the dummy displays. I've left plenty of room in there so a functioning display could be mounted. On the rear is the mounted electronics and wiring covers. cheers John Edited May 8, 2019 by Blue73
Nemax Posted May 8, 2019 Posted May 8, 2019 (edited) That UFC is a work of art Blue73 as with so much of your creations. If you could share the STL for that UFC that would be fantastic. I have an Ender3 which has stood still for far too long. Edited May 9, 2019 by Nemax ASUS ROG Zephyrus S GX502GW (Core i7-9750H, RTX 2070, 32 GB ram) TM Warthog - TM T-Flight Pedals - TrackIr 5 - Cougar MFD Modules F-86F - T.1A - A-10C - M-2000C - UH-1 - F-5 - P-51 - SA342 - Spitfire - AJS-37 - AV-8B - F/A-18C - L-39 - MiG-21 - MiG-15 - KA-50 FC3 - CA - NTTR - Normandy - WWII AP - LotATC - TacView
59thCasper Posted May 9, 2019 Posted May 9, 2019 Hi Everyone, I had to shift the bottom row of buttons back 4mm, it didn't look right, which meant a complete reprint of the UFC. Here is the completed module (except wiring). I've used plexiglass for the dummy displays. I've left plenty of room in there so a functioning display could be mounted. On the rear is the mounted electronics and wiring covers. cheers John looking great man, that plexi makes it look legit, top notch quality 59th | Casper [sIGPIC][/sIGPIC] Our Website | Our Facebook Page | YouTube Channel | Our Discord System : 9900k 5ghz, 32GB 4166mhz Ram, 2080Ti, Hotas Warthog, Virpil WarBRD base, MFG Crosswinds, VR + TrackIR, All Modules For DCS
dwpenney Posted May 9, 2019 Posted May 9, 2019 Yeah I would love to see the STL to get an idea how you broke that model up into individual pieces to print and assemble. Very nice job! Fridge ---------- Things which do you no good in aviation: 1) Altitude above you; 2) Runway behind you; 3) Fuel in the truck; 4) The airspeed you don't have.
Blue73 Posted May 10, 2019 Author Posted May 10, 2019 Thanks guys! You'll get all the STLs once I'm finished, apolgies for the wait, I appreciate your interest. I want it to be 100% good to print before sharing. cheers John
760mm Posted May 10, 2019 Posted May 10, 2019 What type of indicators (displays) will you use in the panel? Отправлено с моего ZB602KL через Tapatalk
Blue73 Posted May 10, 2019 Author Posted May 10, 2019 Hi, as this is a VR pit, at this stage no displays. What type of indicators (displays) will you use in the panel? Отправлено с моего ZB602KL через Tapatalk
Blue73 Posted May 14, 2019 Author Posted May 14, 2019 Rear Housing complete. Ordered a second Zortrax to accelerate the printing. Should proceed quicker to the finish line now. cheers John
NightShiftNinja Posted May 14, 2019 Posted May 14, 2019 Looks amazing as usual john!!!! Cant wait to see the finished project fully assembled. Sent from my SM-G930W8 using Tapatalk
Voyager Posted May 23, 2019 Posted May 23, 2019 This have been an amazing thread to follow. Makes me want to go get a 3D printer and build a simpit of my own. Definitely saving this thread to raid for ideas thoroughly if/when I start rolling on one. Might even see if I can raid it for parts of I move from the F-14 to the F/A-18 by the time you get to a release state. Very cool, and learned a ton of things I didn't know were possible to do with 3D printing :D
Blue73 Posted June 4, 2019 Author Posted June 4, 2019 (edited) Thank you all for your comments, it's very much a motivation. Edited June 4, 2019 by Blue73
Blue73 Posted June 4, 2019 Author Posted June 4, 2019 HUD Control panel is now complete, also all electronics for the UFC completed. I've decided to replace the buttons with accurate buttons. Thanks for following! cheers John
Blue73 Posted June 4, 2019 Author Posted June 4, 2019 Master mode side panel is mostly printed, I'll upload pictures soon. Here's the completed CAD model.
TomVR Posted June 4, 2019 Posted June 4, 2019 For the buttons, have to considered maybe for backlighting them, print the first two layers in black plastic with the letters cut in, then printing solid above with white frosted plastic.
Blue73 Posted June 4, 2019 Author Posted June 4, 2019 Hi Tom, Like this? https://forums.eagle.ru/showpost.php?p=3710195&postcount=139 :) For the buttons, have to considered maybe for backlighting them, print the first two layers in black plastic with the letters cut in, then printing solid above with white frosted plastic.
NightShiftNinja Posted June 4, 2019 Posted June 4, 2019 You sir are a hero among men!!!! Great work!!!! Sent from my SM-G930W8 using Tapatalk
Blue73 Posted June 4, 2019 Author Posted June 4, 2019 Thank you mate! You sir are a hero among men!!!! Great work!!!! Sent from my SM-G930W8 using Tapatalk
LynxDK Posted June 4, 2019 Posted June 4, 2019 I must say Blue, its some real Craftmansship right there :) Very very nice work indeed :) Regards. LynxDK [sIGPIC][/sIGPIC] Instagram
Blue73 Posted June 5, 2019 Author Posted June 5, 2019 Thank you LynxDK!! I must say Blue, its some real Craftmansship right there :) Very very nice work indeed :)
Recommended Posts