Eagle7907 Posted February 13, 2019 Posted February 13, 2019 I ran into another radar scan problem. Can’t really figure out what caused it, but basically I engaged mig23s and after firing two AMRAAMs at them did I notice the b-sweep was broken. It seemed somehow to lose about the last 20 degrees on the left. I can try to lock in that area, but during regular RWS scan it won’t. Track to follow. OB, latest update 2/13/19 Sent from my iPad using Tapatalk Pro Win 10, AMD FX9590/water cooled, 32GB RAM, 250GB SSD system, 1TB SSD (DCS installed), 2TB HD, Warthog HOTAS, MFG rudders, Track IR 5, LG Ultrawide, Logitech Speakers w/sub, Fans, Case, cell phone, wallet, keys.....printer
Eagle7907 Posted February 13, 2019 Author Posted February 13, 2019 Disregard the track. Pointless. For whatever reason the track doesn’t register me targeting an SA6 before my mig engagement. So you won’t even see what happened. I just get shot down. Sent from my iPad using Tapatalk Pro Win 10, AMD FX9590/water cooled, 32GB RAM, 250GB SSD system, 1TB SSD (DCS installed), 2TB HD, Warthog HOTAS, MFG rudders, Track IR 5, LG Ultrawide, Logitech Speakers w/sub, Fans, Case, cell phone, wallet, keys.....printer
GGTharos Posted February 13, 2019 Posted February 13, 2019 Your b-sweep is compressed in AZ from 140 to 80 degrees probably. Check on your DDI. The scan centering is not functioning yet, ie. the scan center is literally centered on aircraft heading, and that's the problem you're facing. I suggest that you use LHACQ for now to fight contacts that you'd normally pick up on the gimbals. [sIGPIC][/sIGPIC] Reminder: SAM = Speed Bump :D I used to play flight sims like you, but then I took a slammer to the knee - Yoda
Eagle7907 Posted February 13, 2019 Author Posted February 13, 2019 [NEED TRACK] Radar scan, b-sweep Your b-sweep is compressed in AZ from 140 to 80 degrees probably. Check on your DDI. The scan centering is not functioning yet, ie. the scan center is literally centered on aircraft heading, and that's the problem you're facing. I suggest that you use LHACQ for now to fight contacts that you'd normally pick up on the gimbals. I checked that. I went through all the azimuth settings and same result, the last quarter or eighth was cut off. Sent from my iPhone using Tapatalk Pro Win 10, AMD FX9590/water cooled, 32GB RAM, 250GB SSD system, 1TB SSD (DCS installed), 2TB HD, Warthog HOTAS, MFG rudders, Track IR 5, LG Ultrawide, Logitech Speakers w/sub, Fans, Case, cell phone, wallet, keys.....printer
mcfleck Posted December 21, 2019 Posted December 21, 2019 (edited) I can confirm this bug, as I am experiencing it too from time to time. Today I wanted to quickly try the new TWS function. After the initial engagement (and after I shot both enemy planes) I switched back to RWS and there it was again. I tried all azimuth settings. In 140° i.e. the radar scanned completely to the left, but stopped at about 58° to the right. I thougth, great I can submit a track file and maybe help getting this bug fixed. But replaying the track file I saw, that the recorded file sometimes came nowhere near to what really happened. So keep that in mind. After killing the second jet, I tried several different modes and a few moments later I switched back from TWS to RWS. Have a look and see for yourself. Version: Latest Open Beta (21. December, 2019) P.S.: Dont judge the engagement itself, as it was flown without any VR/Headtracker and was only meant to quickly test the TWS feature. I know it was horrible.:music_whistling: The mission I am using here is an adapted TTI Mission, which I turned into a pure AA Training map. All Credits and thanks for it are going to Deadlyfishes for his brilliant work.Centering Bug.trk Edited December 21, 2019 by mcfleck Added Track File, Added Information
al531246 Posted December 21, 2019 Posted December 21, 2019 I've been waiting for someone to make a bug report on this. I'm experiencing the same. You lock up a guy in TWS, turn it into an STT, guide a weapon to kill the target and then return back to RWS. The center of the radars sweep will be the target's last position whilst you had him locked up. Intel i5-8600k | EVGA RTX 3070 | Windows 10 | 32GB RAM @3600 MHz | 500 GB Samsung 850 SSD
Eagle7907 Posted December 22, 2019 Author Posted December 22, 2019 This happened again to me the other day as well while trying out TWS. Somehow, don’t know how, but the b-sweep was not completely going to the right. This time I didn’t really know what I was doing. Trying to learn TWS by trial and error. Evidently if you just do lots of sensor select or or other TDC presses and undesignates can cause it as well. Sent from my iPhone using Tapatalk Pro Win 10, AMD FX9590/water cooled, 32GB RAM, 250GB SSD system, 1TB SSD (DCS installed), 2TB HD, Warthog HOTAS, MFG rudders, Track IR 5, LG Ultrawide, Logitech Speakers w/sub, Fans, Case, cell phone, wallet, keys.....printer
falcon_120 Posted December 22, 2019 Posted December 22, 2019 Its definitely happening and I'm not sure how to reproduce it but it is related to the logic switching from a TWS AUTO back to RWS by pressing the OSB button. If Im able to reproduce it I will post a track.
mcfleck Posted December 22, 2019 Posted December 22, 2019 Well even if this may happen more frequently after the TWS implementation, I had seen this bug way earlier. Btw: A track is attached by now, so the thread title can be changed (the part in [...]).
Ziptie Posted December 23, 2019 Posted December 23, 2019 I ran into another radar scan problem. Can’t really figure out what caused it, but basically I engaged mig23s and after firing two AMRAAMs at them did I notice the b-sweep was broken. It seemed somehow to lose about the last 20 degrees on the left. I can try to lock in that area, but during regular RWS scan it won’t. Track to follow. OB, latest update 2/13/19 Sent from my iPad using Tapatalk Pro Same thing just happened to me today as well. Lost the left 20* of sweep. It was off center, by 20* . A similar bug popped up awhile back, but it was fixed with a hotfix/patch. Guessing and/or hoping that the same will happen this time. @bignewy - OP posted a track file for reference. Cheers, Don (callsign Ziptie) i7 6700 @4ghz, 32GB HyperX Fury ddr4-2133 ram, GTX980, Oculus Rift CV1, 2x1TB SSD drives (one solely for DCS OpenBeta standalone) Thrustmaster Warthog HOTAS, Thrustmaster Cougar MFDs Airframes: A10C, A10CII, F/A-18C, F-14B, F-16C, UH=1H, FC3. Modules: Combined Arms, Supercarrier. Terrains: Persian Gulf, Nevada NTTR, Syria
Eagle7907 Posted December 23, 2019 Author Posted December 23, 2019 I can confirm this bug, as I am experiencing it too from time to time. Today I wanted to quickly try the new TWS function. After the initial engagement (and after I shot both enemy planes) I switched back to RWS and there it was again. I tried all azimuth settings. In 140° i.e. the radar scanned completely to the left, but stopped at about 58° to the right. I thougth, great I can submit a track file and maybe help getting this bug fixed. But replaying the track file I saw, that the recorded file sometimes came nowhere near to what really happened. So keep that in mind. After killing the second jet, I tried several different modes and a few moments later I switched back from TWS to RWS. Have a look and see for yourself. Version: Latest Open Beta (21. December, 2019) P.S.: Dont judge the engagement itself, as it was flown without any VR/Headtracker and was only meant to quickly test the TWS feature. I know it was horrible.:music_whistling: The mission I am using here is an adapted TTI Mission, which I turned into a pure AA Training map. All Credits and thanks for it are going to Deadlyfishes for his brilliant work. Same thing just happened to me today as well. Lost the left 20* of sweep. It was off center, by 20* . A similar bug popped up awhile back, but it was fixed with a hotfix/patch. Guessing and/or hoping that the same will happen this time. @bignewy - OP posted a track file for reference. Cheers, Don (callsign Ziptie) I didn’t. Someone else did. Credit where credit is due. Sent from my iPad using Tapatalk Pro Win 10, AMD FX9590/water cooled, 32GB RAM, 250GB SSD system, 1TB SSD (DCS installed), 2TB HD, Warthog HOTAS, MFG rudders, Track IR 5, LG Ultrawide, Logitech Speakers w/sub, Fans, Case, cell phone, wallet, keys.....printer
ED Team NineLine Posted December 23, 2019 ED Team Posted December 23, 2019 Thanks for the track, unfortunately it looks like the server or mission is using custom scripts. if possible could you create a script-free track of the issue? Thanks! I can confirm this bug, as I am experiencing it too from time to time. Today I wanted to quickly try the new TWS function. After the initial engagement (and after I shot both enemy planes) I switched back to RWS and there it was again. I tried all azimuth settings. In 140° i.e. the radar scanned completely to the left, but stopped at about 58° to the right. I thougth, great I can submit a track file and maybe help getting this bug fixed. But replaying the track file I saw, that the recorded file sometimes came nowhere near to what really happened. So keep that in mind. After killing the second jet, I tried several different modes and a few moments later I switched back from TWS to RWS. Have a look and see for yourself. Version: Latest Open Beta (21. December, 2019) P.S.: Dont judge the engagement itself, as it was flown without any VR/Headtracker and was only meant to quickly test the TWS feature. I know it was horrible.:music_whistling: The mission I am using here is an adapted TTI Mission, which I turned into a pure AA Training map. All Credits and thanks for it are going to Deadlyfishes for his brilliant work. Forum Rules • My YouTube • My Discord - NineLine#0440• **How to Report a Bug**
mcfleck Posted December 24, 2019 Posted December 24, 2019 Oh shoot! Yes, sorry it is the mission where the scripts are dynamically loaded. I will try to reproduce it in a script less mission.
Ziptie Posted December 24, 2019 Posted December 24, 2019 It’s ok I think - as another thread was marked as “reported.” Although the title was different, the complaint and scenario is really the same - should be addressed as NL has reported it... https://forums.eagle.ru/showthread.php?t=258503 Cheers, Don (callsign Ziptie) i7 6700 @4ghz, 32GB HyperX Fury ddr4-2133 ram, GTX980, Oculus Rift CV1, 2x1TB SSD drives (one solely for DCS OpenBeta standalone) Thrustmaster Warthog HOTAS, Thrustmaster Cougar MFDs Airframes: A10C, A10CII, F/A-18C, F-14B, F-16C, UH=1H, FC3. Modules: Combined Arms, Supercarrier. Terrains: Persian Gulf, Nevada NTTR, Syria
ED Team NineLine Posted December 26, 2019 ED Team Posted December 26, 2019 Yeah, I agree, closing this one as already reported. Forum Rules • My YouTube • My Discord - NineLine#0440• **How to Report a Bug**
Recommended Posts