euthyphro Posted October 7, 2019 Share Posted October 7, 2019 Any reason why I can no longer get aircraft carrier TCN to show on my MFCD and HUD? I can get the Morse Code but nothing far as range or bearing. Link to comment Share on other sites More sharing options...
Bunny Clark Posted October 7, 2019 Share Posted October 7, 2019 You have TACAN boxed on the HSI? Oil In The Water Hornet Campaign. Bunny's: Form-Fillable Controller Layout PDFs | HOTAS Kneeboards | Checklist Kneeboards Link to comment Share on other sites More sharing options...
boo_n_817 Posted October 9, 2019 Share Posted October 9, 2019 Any reason why I can no longer get aircraft carrier TCN to show on my MFCD and HUD? I can get the Morse Code but nothing far as range or bearing. I'm having the same issue. Seems like it went away after the last update. Link to comment Share on other sites More sharing options...
Shimmergloom667 Posted October 9, 2019 Share Posted October 9, 2019 I'm having the same issue. Seems like it went away after the last update. Can't confirm, working without issue for me i7 - 9700K | 32 GB DDR4 3200 | RTX 2080 | VKB Gunfighter Mk II /w MCG Pro | Virpil T-50CM2 Throttle | TrackIR 5 | VKB Mk. IV AJS-37 | A/V-8B | A-10C | F-14A/B | F-16C | F-18C | F-86F | FC3 | JF-17 | Ka-50 | L-39 | Mi-8 | MiG-15bis | MiG-19 | MiG-21bis | M2000-C | P-51D | Spitfire LF Mk. IX | UH-1H Link to comment Share on other sites More sharing options...
Brun Posted October 9, 2019 Share Posted October 9, 2019 Was doing traps last night. No issues using missions that were created many months ago. Asus Z690 Hero | 12900K | 64GB G.Skill 6000 | 4090FE | Reverb G2 | VPC MongoosT-50CM2 + TM Grips | Winwing Orion2 Throttle | MFG Crosswind Pedals Link to comment Share on other sites More sharing options...
Harker Posted October 9, 2019 Share Posted October 9, 2019 Works fine for me. Are you sure that you're tuning in the correct channel and band etc and that the unit actually has TACAN activated? Also, there are limitations on which TACAN channels are valid, because some of them interfere with the datalink. The limitations are different for A/A and T/R. Wags mentioned it a while ago in the Hornet mini updates. Try something like 70X T/R and see if it works. The vCVW-17 is looking for Hornet and Tomcat pilots and RIOs. Join the vCVW-17 Discord. F/A-18C, F-15E, AV-8B, F-16C, JF-17, A-10C/CII, M-2000C, F-14, AH-64D, BS2, UH-1H, P-51D, Sptifire, FC3 - i9-13900K, 64GB @6400MHz RAM, 4090 Strix OC, Samsung 990 Pro Link to comment Share on other sites More sharing options...
Shimmergloom667 Posted October 9, 2019 Share Posted October 9, 2019 Are the limitations simulated? Yes i7 - 9700K | 32 GB DDR4 3200 | RTX 2080 | VKB Gunfighter Mk II /w MCG Pro | Virpil T-50CM2 Throttle | TrackIR 5 | VKB Mk. IV AJS-37 | A/V-8B | A-10C | F-14A/B | F-16C | F-18C | F-86F | FC3 | JF-17 | Ka-50 | L-39 | Mi-8 | MiG-15bis | MiG-19 | MiG-21bis | M2000-C | P-51D | Spitfire LF Mk. IX | UH-1H Link to comment Share on other sites More sharing options...
Shimmergloom667 Posted October 9, 2019 Share Posted October 9, 2019 Tnx. Where I can find details about that? With the search function in this here forum ;) https://forums.eagle.ru/showpost.php?p=3821502&postcount=139 Edit: I'm hijacking the thread, do you know how to set up tcn dme/dme between two F-18? Tacan Yardstick channels have to be 63 apart, e.g. Lead aircraft 5Y, then flight needs 68Y to get ranging information. i7 - 9700K | 32 GB DDR4 3200 | RTX 2080 | VKB Gunfighter Mk II /w MCG Pro | Virpil T-50CM2 Throttle | TrackIR 5 | VKB Mk. IV AJS-37 | A/V-8B | A-10C | F-14A/B | F-16C | F-18C | F-86F | FC3 | JF-17 | Ka-50 | L-39 | Mi-8 | MiG-15bis | MiG-19 | MiG-21bis | M2000-C | P-51D | Spitfire LF Mk. IX | UH-1H Link to comment Share on other sites More sharing options...
boo_n_817 Posted October 10, 2019 Share Posted October 10, 2019 With the search function in this here forum ;) https://forums.eagle.ru/showpost.php?p=3821502&postcount=139 This post was back in March. I've made 50+ missions since then and have used 25X for the Stennis in most of them. It is still working working in missions built before the last update, but it's not working in missions built since. Help. :) Link to comment Share on other sites More sharing options...
randomTOTEN Posted October 10, 2019 Share Posted October 10, 2019 I've noticed lately that the TACAN has a tendency to "freeze" in MP. It's an easy fix. Turn the receiver off, then turn it back on again. It's reached the point for me where I can't tell if a bug or a feature. Link to comment Share on other sites More sharing options...
doright Posted October 10, 2019 Share Posted October 10, 2019 I had same issue in AV8B. Took off in MP from airfield and TACAN never pointed to CV. Once I landed on the CV the TACAN was fine. A/A TACAN to tanker seemed to work ok. Link to comment Share on other sites More sharing options...
Harker Posted October 10, 2019 Share Posted October 10, 2019 (edited) With the search function in this here forum ;) https://forums.eagle.ru/showpost.php?p=3821502&postcount=139 This post was back in March. I've made 50+ missions since then and have used 25X for the Stennis in most of them. It is still working working in missions built before the last update, but it's not working in missions built since. Help. :) Hm, I don't remember if I made any new carrier ops missions lately. Certainly working with older missions. I'll make a new one today and test it, if I have time. Although I use 74X for Stennis, so it might just be an issue of your chosen channel. A campaign I downloaded a few weeks ago uses 37X for the carrier and that works still. I'll test with 74X and 25X. Edited October 10, 2019 by Harker The vCVW-17 is looking for Hornet and Tomcat pilots and RIOs. Join the vCVW-17 Discord. F/A-18C, F-15E, AV-8B, F-16C, JF-17, A-10C/CII, M-2000C, F-14, AH-64D, BS2, UH-1H, P-51D, Sptifire, FC3 - i9-13900K, 64GB @6400MHz RAM, 4090 Strix OC, Samsung 990 Pro Link to comment Share on other sites More sharing options...
Harker Posted October 10, 2019 Share Posted October 10, 2019 I tested in a new mission on Caucasus. I could tune in to the carrier in T/R mode on 25X and to a tanker on 13Y just fine, getting accurate range and bearing info. AWACS was present and the datalink connection remained up the whole time. I shouldn't be able to get any info on those channels. So that's interesting, I guess... The vCVW-17 is looking for Hornet and Tomcat pilots and RIOs. Join the vCVW-17 Discord. F/A-18C, F-15E, AV-8B, F-16C, JF-17, A-10C/CII, M-2000C, F-14, AH-64D, BS2, UH-1H, P-51D, Sptifire, FC3 - i9-13900K, 64GB @6400MHz RAM, 4090 Strix OC, Samsung 990 Pro Link to comment Share on other sites More sharing options...
Stubbies2003 Posted October 11, 2019 Share Posted October 11, 2019 I've noticed lately that the TACAN has a tendency to "freeze" in MP. It's an easy fix. Turn the receiver off, then turn it back on again. I've seen this. I've seen TCN not work for some carriers randomly in MP and some work fine and have had all carriers work fine. The latest test I've been doing is to make sure to have the frequency dialed in prior to turning on the receiver or when changing carriers to shut off TCN then clear and change frequency then turn it back on. Has worked well so far but not nearly enough testing done to call it a work around. Link to comment Share on other sites More sharing options...
euthyphro Posted October 18, 2019 Author Share Posted October 18, 2019 Video!! Here is a video of my problem as described. There is no audio but I do hear the TCN beacon when I turn on the TCN volume. When I select a TCN at an airfield I do not have this problem. I only have this problem with carriers. https://www.youtube.com/watch?v=oKetnz67HvY&feature=youtu.be Link to comment Share on other sites More sharing options...
RentedAndDented Posted October 18, 2019 Share Posted October 18, 2019 Video is coming up as private for me. But - are you on the SA page by any chance and not the HSD? Link to comment Share on other sites More sharing options...
Stubbies2003 Posted October 18, 2019 Share Posted October 18, 2019 Got to see it again today in MP. I had the TACAN dialed in on the UFC, HSI on the left DDI, TCN boxed on the DDI and was 2-3 NM aft of the carrier turning in for landing and the signal just up and disappeared. Link to comment Share on other sites More sharing options...
euthyphro Posted October 20, 2019 Author Share Posted October 20, 2019 Got to see it again today in MP. I had the TACAN dialed in on the UFC, HSI on the left DDI, TCN boxed on the DDI and was 2-3 NM aft of the carrier turning in for landing and the signal just up and disappeared. I got the signal, just no TACAN beacon or heading selection on my HSI. Link to comment Share on other sites More sharing options...
euthyphro Posted October 20, 2019 Author Share Posted October 20, 2019 I uploaded it again... Should be public now Link to comment Share on other sites More sharing options...
Stubbies2003 Posted October 21, 2019 Share Posted October 21, 2019 I got the signal, just no TACAN beacon or heading selection on my HSI. Mine it totally vanishes as if I had manually selected a TACAN channel not in use. Heading inidicator spinning which is correct for no track/searching and no TACAN data in HUD or HSI. Link to comment Share on other sites More sharing options...
Recommended Posts