Antiguedad Posted August 31, 2020 Posted August 31, 2020 I've noticed that turning HSI VAD Selector both in clockwise or counterclockwise directions always increases the value in modes rho and theta. At least in my case, I can't decrease the values of rho or theta in HSI VAD mode. Dont know if it's a bug, or if anyone else have noticed this. (last openbeta) Thanks. (sorry for the title, I meant value, not valor)
Wagner Posted September 1, 2020 Posted September 1, 2020 I don't often use it but i can confirme that when creating an offset to a target (tested on multiplayer). Win10 64 / Intel Core i5-9400F/ 32Go RAM / GeForce GTX 2070s / HOTAS Warthog french speaking here... Callsign ZeeWag on DCS Callsign "Wagner" since 1998 (Falcon 4.0, Longbow II...)
Natshi Posted September 2, 2020 Posted September 2, 2020 hello all, Yeah confirm, I was about to oppen this thread myself. I think it is from last update.
lolwut845 Posted September 10, 2020 Posted September 10, 2020 yup, happens to me too. i7 4790K, 1080ti, oculus quest+link, winwing f18 hotas, MFG crosswind custom AB2 pit
RAZBAM_ELMO Posted September 25, 2020 Posted September 25, 2020 Hello JuanAJ, if you can confirm this still present in the latest update from 23/09/2020. If so, please attach a new .trk file thankyou. Know and use all the capabilities in your airplane. If you don't, sooner or later, some guy who does use them all will kick your ass. — Dave 'Preacher' Pace, USN.
=36=Witcher Posted September 25, 2020 Posted September 25, 2020 Hello JuanAJ, if you can confirm this still present in the latest update from 23/09/2020. If so, please attach a new .trk file thankyou. I can confirm this is still in the latest OpenBeta, tried yesterday. In orded to reproduce, just click+drag the IDN left knob, or scroll the mousewheel. it will only increase, regardless of the direction of the click-and-drag or the mousewheel.
RAZBAM_ELMO Posted September 25, 2020 Posted September 25, 2020 And just to also confirm you have a clean install? Can you post a .trk file for us to review as well? Sent from my SM-N960F using Tapatalk Know and use all the capabilities in your airplane. If you don't, sooner or later, some guy who does use them all will kick your ass. — Dave 'Preacher' Pace, USN.
Galinette Posted September 25, 2020 Posted September 25, 2020 (edited) I confirm the bug too with a clean OpenBeta install. The knob turns in both directions, but the theta or rho always increase. This happens both with the mouse and a VR controller. trk : hsi-bug.trk Edited September 25, 2020 by galinette
=36=Witcher Posted September 25, 2020 Posted September 25, 2020 Well, galinette made it quicker. I guess there's no need for another track.
Moody1204 Posted September 26, 2020 Posted September 26, 2020 And just to also confirm you have a clean install? Can you post a .trk file for us to review as well? Sent from my SM-N960F using Tapatalk Hi Elmo, Here is a propper trackfile concerning the HSI knob bug. You will see that turning the knob only increased the value. Thanks !M2k_HSI_knob_bug.trk
Galinette Posted September 26, 2020 Posted September 26, 2020 Here is a propper trackfile What?? Mine was improper? :)
Moody1204 Posted September 27, 2020 Posted September 27, 2020 What?? Mine was improper? :) haha no, it was fine. Two are better than one and it follows a request on the Razbam discord :thumbup:
DimSim Posted October 16, 2020 Posted October 16, 2020 Confirm this bug still exists v2.5.6 beta channel. HSI VAD selector - turning selector left or right always increases the value Track attachedm2000_hsi_vad_sel_bug1.trk
gulredrel Posted October 17, 2020 Posted October 17, 2020 Good to find this thread. Also got this behaviour in current stable, which is the same as beta at the moment of writing.
RAZBAM_ELMO Posted October 18, 2020 Posted October 18, 2020 Good to find this thread. Also got this behaviour in current stable, which is the same as beta at the moment of writing.The fixes come out in OB and eventually work their way down to stable. Sent from my SM-N960F using Tapatalk Know and use all the capabilities in your airplane. If you don't, sooner or later, some guy who does use them all will kick your ass. — Dave 'Preacher' Pace, USN.
Moody1204 Posted November 20, 2020 Posted November 20, 2020 With last OB as per 11-20-2020 the bug is still present. HSI knob selector only increase in either clockwise or counterclock
RAZBAM_ELMO Posted November 23, 2020 Posted November 23, 2020 With last OB as per 11-20-2020 the bug is still present. HSI knob selector only increase in either clockwise or counterclock understood, tracking. Know and use all the capabilities in your airplane. If you don't, sooner or later, some guy who does use them all will kick your ass. — Dave 'Preacher' Pace, USN.
Chaprot Posted December 5, 2020 Posted December 5, 2020 (edited) I confirm that to date, symptoms persist. Edited December 5, 2020 by Chaprot
Dragon1-1 Posted December 10, 2020 Posted December 10, 2020 Still not fixed, latest OB. Will check again after the 16th.
MisterVince Posted December 12, 2020 Posted December 12, 2020 (edited) I also confirm that this bug is still occuring on last OB. Best regards, Edited December 12, 2020 by MisterVince Kind regards, Vince PC: i5-7300HQ@2,5GHz | nVidia GTX 1050 Ti | 8Gb RAM | 256GB SSD for Windows+DCS | Windows10 Modules: Mirage2000C | AV-8B N/A | MiG-21Bis | F-5E | L-39 | Gazelle | FC3 Combined Arms | Supercarrier NTTR | Persian Gulf
error81 Posted December 17, 2020 Posted December 17, 2020 (edited) hi, "Fixed: HSI knob decreases value" - WORKS WELL THX, Why now it is impossible to increase / decrease the distance(Rho) by one. Only every 5 units (Rho)?? // OCCURRES WHEN I USE THE MOUSE ROLLER Edited December 18, 2020 by error81
Galinette Posted December 19, 2020 Posted December 19, 2020 Hi Razbam, Now, the HSI knob works both directions. But, it changes rho by 15nm steps (instead of 0.1nm...) and theta by somthing like 6° And, that's not the worst : when changing one of those parameters (theta or rho) by some amount, then going to the other parameter, and changing it by a single step, the values jumps out like crazy. As if both values were changed at the same time when turning the knob, but updated on the HSI when changing it by one step. In short: Before last update : HSI offset was usable, but if you needed to decrease rho or theta, you had to increase up to 999nm or 359° and it would cycle back to zero. Not ideal but worked. After last update : even if you are OK with not being able to adjust with more precision than 15nm or 6°, it's basically impossible to set a theta/rho offset due to the coupling between values. TRK attached... hsi-bug.trk
Recommended Posts