hitman Posted July 13, 2008 Share Posted July 13, 2008 I never got my hands on em...personally I think it would be nice to have, and I just may have to go get me one of them etch and light pen pads for photoshop soon. I cant get anyone to do the JAWS mod and it would be nice to do so myself...I havent worked with photoshop in damn near 3 years with the exception of my occasional sig. 1 Link to comment Share on other sites More sharing options...
thereminqblank Posted July 13, 2008 Share Posted July 13, 2008 I have the file and I've been doing some work to it. I never said anything because it's slow going for me, as I've never done anything like this before. Also, due to my lack in skills in this area :P what I'm doing is a mix between Deadman's template and the detailing of the original Sim-mod A-10. ie, I'm tracing a whole bunch of stuff and copying bits and pieces like the inside wheel wells, inside air brakes etc. Plus, the Hogbody part of the template has been split into so many layers, it's taking up over 850mb of memory, so every little thing done takes a while in processing time - at least until I can reduce the number of layers. "Unholy Roller" [sIGPIC]http://www.digitalcombatsimulator.com/images/userbars/A-10C_UserBar_01.gif[/sIGPIC] Link to comment Share on other sites More sharing options...
Deadman Posted September 26, 2008 Author Share Posted September 26, 2008 Well Its been a few months and I have a bit of spare time so I thought I would take out the crayons again I will get these packed as soon as I figure out whats wrong with the TGA s. I make in fireworks then apply alpha channels and save in Gimp or get some one to convert them from png to tga for me. Grayed out lines on the numbers just looks weird.I still have to add some textures and sheild and bits so this is a preview :thumbup::pilotfly: https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
arthuro12 Posted September 26, 2008 Share Posted September 26, 2008 Looks a tad too clean.. maybe add some dirt ;) [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
JaNk0 Posted September 26, 2008 Share Posted September 26, 2008 yeah, we want her dirty ;) [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
OldCrow Posted September 26, 2008 Share Posted September 26, 2008 Looks nice! A little weathering and its a winner:thumbup: [sIGPIC]http://www.virtualredarrows.com/member_sigs/vra2012_crow.png[/sIGPIC] Link to comment Share on other sites More sharing options...
Deadman Posted September 26, 2008 Author Share Posted September 26, 2008 I still have to add some textures and shield and bits so this is a preview :thumbup::pilotfly:This means the skins are not finished so lets not start with the ahhh there is no dirt on it that is the last thing on it https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
NotiA10 Posted September 26, 2008 Share Posted September 26, 2008 looks very good mate !!! where is the dirt ? lololololololololol 1 :pilotfly: NotiA10 CoolerMaster HAF RC-932 - Intel Core i7 950 - Arctic Cooling Freezer 7 Pro - Gigabyte GA-X58A-UD3R - Kingston DDR3 6GB - Gigabyte Radeon HD 5870 EF 6 Edition - Western Digital 640GB SATA-III - CoolerMaster 700W - TrackIR Pro 4 - Saitek X52 - Saitek Rudder Pedals - Hotas Warthog Link to comment Share on other sites More sharing options...
Deadman Posted September 26, 2008 Author Share Posted September 26, 2008 Noti don't Piss the Cuban off dam it i jst got the man back to work painting LMAO https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
SuperKungFu Posted September 26, 2008 Share Posted September 26, 2008 this would look awesome when its done, especially that flipper one. [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
wildcat EAF51 Posted September 26, 2008 Share Posted September 26, 2008 very nice yes a little of wornout? [sIGPIC][/sIGPIC] I'm Fighter pilot not a murderer! Link to comment Share on other sites More sharing options...
SuperKungFu Posted September 26, 2008 Share Posted September 26, 2008 Well these are very very early work of the template, of course he's going to add weather effects. [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Deadman Posted September 27, 2008 Author Share Posted September 27, 2008 Sorry this is not template work its Skins and TGA the template is done:thumbup: https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
SuperKungFu Posted September 27, 2008 Share Posted September 27, 2008 yea sorry i meant skin [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Deadman Posted September 27, 2008 Author Share Posted September 27, 2008 IS this enough? the air craft has been weathered layered the body has been faded colors on it so you can see the difference https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
PythonOne Posted September 27, 2008 Share Posted September 27, 2008 IMHO, i think this is great. Finally someone other than Rugg is stepping up to create new skins for Sim-mod A-10. However, i think why everyone wants more weather effects is because the colors needs to be slightly tweaked. For example, the green European skin, i think the colors needs to be tweaked in order to blend in with one another. Like this Also i think the decas should be darker. I think you should match the colors up to Rugg's European skin, same thing with the peanut in your previous pics. However, your flipper seems to be better and also you have better camo patterns. Link to comment Share on other sites More sharing options...
hitman Posted September 27, 2008 Share Posted September 27, 2008 Id like to know how to put the numbers on the wheel wells for my personal skin. Link to comment Share on other sites More sharing options...
Deadman Posted September 27, 2008 Author Share Posted September 27, 2008 The original unweathered Euro3 skin used the colors in your picture. this current picture Euro 1 has an older dark gray in it 26231 instead of the Euro three gray 36081 and as listed in the T.O and taken from the FS color page Sorry fore any confusion. I made the Euro skin in several versions so there is a bit of choice so everyone is not flying the exact aircraft if they don't want to. Decas? do you mean decals? I am not sure what you mean by tweaked? Could you explain? Not sure how i would get Ruggs colors but i could ask. All the colors I have used are listed as the real color used in painting the real aircraft thanks for the input :thumbup: 1 https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
hitman Posted September 28, 2008 Share Posted September 28, 2008 Tweaked as in sun faded. Link to comment Share on other sites More sharing options...
Deadman Posted September 28, 2008 Author Share Posted September 28, 2008 To add numbers for the wheel wells from page 8 of Simmod's pdf included in the down load you need to change the red circle entry from NOMblank.tga to numbersm.tga and you will have numbers on the whellwells. https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Deadman Posted September 28, 2008 Author Share Posted September 28, 2008 Not sure thats why I asked it can mean a lot of different things Tweaked as in sun faded. https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
hitman Posted September 28, 2008 Share Posted September 28, 2008 I dont think even he knew what he was asking, just a rough idea. 1 Link to comment Share on other sites More sharing options...
Deadman Posted September 28, 2008 Author Share Posted September 28, 2008 Let me know if you have any other questions on the number stuff once you start working with it . easy stuff and you can have white numbers on the wheel wells and black or black and white on the tail and under the windsheild https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Deadman Posted October 1, 2008 Author Share Posted October 1, 2008 A little update Finial touch ups on the old 917th wing Hawg Head and choosing shields the 46th and 47th fighter Squadrons did not were shields but they may look good 1 https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
SuperKungFu Posted October 1, 2008 Share Posted October 1, 2008 looking very nice, keep it up. [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Recommended Posts