stevie02sky.com Posted February 10, 2021 Posted February 10, 2021 I’ve been trying to use this with varying degrees of success. Watched lots of utube vids. Biggest issue is I keep switching to DMT, then I have to switch tgp back on. It seems the instruction, ‘sensor select aft’ twice isn’t what’s needed to allow tdc control of the pod. Any advice ?
DimSim Posted February 10, 2021 Posted February 10, 2021 (edited) 2x Sensor Select Switch Down (Pressed), not Aft (Back) should toggle from DMT to TPOD. Edited February 10, 2021 by DimSim 1
Longiron Posted February 10, 2021 Posted February 10, 2021 I think he's is using the DMT then going back to pod. From what I can tell the pod will time out in 10sec and go into stow, you then have to punch MFD to bring it back up. Also side note, a rearm will reset the pod and will need a 6min cool down for the flir to come up... annoying to say the least.
dresoccer4 Posted March 1, 2021 Posted March 1, 2021 I'm pressing TDC down twice and TDC aft twice as it says in the tutorial however I cannot get it to switch back to TPOD without using the MFD. has anyone else gotten this to work? Also as far as I can tell selecting "MTC" creates no discernable difference in how tracking works between the sensors. I'm following tutorial exactly but it's not behaving as described Acer Predator Triton 700 || i7-7700HQ || 512GB SSD || 32GB RAM || GTX1080 Max-Q || FFB II and Thrustmaster TWCS Throttle || All DCS Modules
Wisky Posted March 1, 2021 Posted March 1, 2021 MTC is not a working feature yet. TDC depress twice to bring tpod back up only works if the tpod was not in the background for longer than 10 seconds. after 10 seconds it automatically shuts down and you have to use MPCD buttons to start it up again.
dresoccer4 Posted March 1, 2021 Posted March 1, 2021 14 minutes ago, Wisky said: MTC is not a working feature yet. TDC depress twice to bring tpod back up only works if the tpod was not in the background for longer than 10 seconds. after 10 seconds it automatically shuts down and you have to use MPCD buttons to start it up again. yeah still not working for me. ill have TPOD on the MFD, then press SSS aft to get into TV mode, then press TDC twice and nothing happens Acer Predator Triton 700 || i7-7700HQ || 512GB SSD || 32GB RAM || GTX1080 Max-Q || FFB II and Thrustmaster TWCS Throttle || All DCS Modules
Fri13 Posted March 1, 2021 Posted March 1, 2021 28 minutes ago, dresoccer4 said: yeah still not working for me. ill have TPOD on the MFD, then press SSS aft to get into TV mode, then press TDC twice and nothing happens TDC is used to slew the targeting systems around, the TDC Down (as it is vertical grip in the throttle, so it is not Aft) is TDC Action mode. If you want to switch between TPOD and ARBS/TV then you need to use Sensor Select Switch Down 2x (in 0.8 second time period). You enter and exit TPOD control mode by SSS Down 2x. When you get to INS mode after exiting TPOD mode, you can press SSS Aft to open ARBS/LST mode and then second time to get ARBS/TV mode. i7-8700k, 32GB 2666Mhz DDR4, 2x 2080S SLI 8GB, Oculus Rift S. i7-8700k, 16GB 2666Mhz DDR4, 1080Ti 11GB, 27" 4K, 65" HDR 4K.
Recommended Posts