ZQuickSilverZ Posted June 20, 2021 Posted June 20, 2021 I cannot seem to get the sight to move. It is like the thing is locked into place. I have done the following steps as per the manual. Aux Stores Lights (not sure what this actually even does) Turned on my ASP-17VP sight. Turned ASP-17 sight to auto Made sure the weapons selector was on OFF/MSL Switched on the Weapon Safety Switch in the Pilot-Operator cockpit Verified the ATGM sight control was set to OPER Turned on Missile Power Switch Turned on the ATGM sight power and guidance unit panel Turned on the OBSERV (verified doors opened) Selected a missile. I used keyboard commands ;,./ and an axis on my joystick (and yes I did check for conflicting axis inputs). Sometimes the sight will move a bit but then it just snaps back to where it was despite what direction I bump it. Anybody else having this problem? I need, I need, I need... What about my wants? QuickSilver original. "Off with his job" Mr Burns on the Simpsons. "I've seen steering wheels / arcade sticks / flight sticks for over a hundred dollars; why be surprised at a 150 dollar item that includes the complexities of this controller?! It has BLINKY LIGHTS!!" author unknown. These titles are listed in the chronological order I purchased them. [sIGPIC][/sIGPIC]
Northstar98 Posted June 20, 2021 Posted June 20, 2021 Are you waiting a minute or so for the gyros to spin up once you hit the observe switch? Modules I own: F-14A/B, F-4E, Mi-24P, AJS 37, AV-8B N/A, F-5E-3, MiG-21bis, F-16CM, F/A-18C, Supercarrier, Mi-8MTV2, UH-1H, Mirage 2000C, FC3, MiG-15bis, Ka-50, A-10C (+ A-10C II), P-47D, P-51D, C-101, Yak-52, WWII Assets, CA, NS430, Hawk. Terrains I own: South Atlantic, Syria, The Channel, SoH/PG, Marianas. System: GIGABYTE B650 AORUS ELITE AX, AMD Ryzen 5 7600, Corsair Vengeance DDR5-5200 32 GB, NVIDIA GeForce RTX 4070S FE, Western Digital Black SN850X 1 TB (DCS dedicated) & 2 TB NVMe SSDs, Corsair RM850X 850 W, NZXT H7 Flow, MSI G274CV. Peripherals: VKB Gunfighter Mk.II w. MCG Pro, MFG Crosswind V3 Graphite, Logitech Extreme 3D Pro.
clanitho Posted June 20, 2021 Posted June 20, 2021 1 hour ago, ZQuickSilverZ said: I cannot seem to get the sight to move. It is like the thing is locked into place. I have done the following steps as per the manual. Aux Stores Lights (not sure what this actually even does) Turned on my ASP-17VP sight. Turned ASP-17 sight to auto Made sure the weapons selector was on OFF/MSL Switched on the Weapon Safety Switch in the Pilot-Operator cockpit Verified the ATGM sight control was set to OPER Turned on Missile Power Switch Turned on the ATGM sight power and guidance unit panel Turned on the OBSERV (verified doors opened) Selected a missile. I used keyboard commands ;,./ and an axis on my joystick (and yes I did check for conflicting axis inputs). Sometimes the sight will move a bit but then it just snaps back to where it was despite what direction I bump it. Anybody else having this problem? Hello, in Control Settings, go to "Mi-24 Aiming Sight" and remove Joystick, mouse, and rudder axes assignation. After that you can assign what you want to move 9k113 sight. 1 MSI Z97 Gaming 5 - Intel I7 4790K - Artic cooling freezer 7 pro rev 2 - GSKILL 32 Go - SSD Crucial M5 120 go - SSD Crucial 2To - HDD western digital caviar blue 1 TO - Gigabyte GTX 1070 Gaming G1 - Windows 10 home 64 bits
ZQuickSilverZ Posted June 20, 2021 Author Posted June 20, 2021 3 hours ago, Northstar98 said: Are you waiting a minute or so for the gyros to spin up once you hit the observe switch? Yes. 3 hours ago, clanitho said: Hello, in Control Settings, go to "Mi-24 Aiming Sight" and remove Joystick, mouse, and rudder axes assignation. After that you can assign what you want to move 9k113 sight. I already did that. As stated I in my original posts "(and yes I did check for conflicting axis inputs)". I need, I need, I need... What about my wants? QuickSilver original. "Off with his job" Mr Burns on the Simpsons. "I've seen steering wheels / arcade sticks / flight sticks for over a hundred dollars; why be surprised at a 150 dollar item that includes the complexities of this controller?! It has BLINKY LIGHTS!!" author unknown. These titles are listed in the chronological order I purchased them. [sIGPIC][/sIGPIC]
XPACT Posted June 20, 2021 Posted June 20, 2021 3 hours ago, Northstar98 said: Are you waiting a minute or so for the gyros to spin up once you hit the observe switch? That only lasts 10 - 15 seconds
jayst0r Posted June 25, 2021 Posted June 25, 2021 (edited) I have the same Problem. Funny is though when i quit the game it worked shortly. Then I noticed what was going on, even though i cleared out all Axis when setting up somehow, the exis on the Warthog throttle remain maped. Also Saitek Rudder brake axis remain maped but not visiable in ui, same goes for a Button Box with 5 Dials, ... they are all mapped, but i can not unmap them......I tried pressing clear on all of them, but does not matter I think I found the Problem try looking for the M24 Aiming station not mi24 SIM and delete the controls from there. The aiming station in MI24SIm references the lua from the AIming station...:-D hope it helps Edited June 25, 2021 by jayst0r Found the Problem
Recommended Posts