reported earlier Excessive YAW while mouting TGP.

[LordOrion]

It is already hard to keep the plane straight on the runway while taking-off / landing when in "clean" configuration but when mouting the TPG, keeping it on the runway is really hard since it continuously try slew  to the right (the side owhere th TGP is mounted) and I have to apply an excessive amount of rudder to compensate.

Once in flight the problem is less annoying but I still have to compensate with the trim and from time to time correct the course.

I already saw this issue a lot of time ago (I've just restared with the Viper after some time spent on other planes) and I read somewhere that the problem was reduced in some previous update but IMHO it's still the same if not worse...

• No, there is no double rudder axis assignment: it is assigned to the TFRP pedals only.
• No, there is no pad/other controller connected to my PC except the warthog and TFRP (and M+K obviously).
• No, I don't  need to set a deadzone for the pedals: I alredy did it and it does not help. Moreover I've checked with the input control window (CTRL+ENTER) and the rudder axis is perfectly centered when the problem occurs.

 

Any help?

Edited January 14, 2023 by LordOrion

[silverdevil]

8 minutes ago, LordOrion said:

It is already hard to keep the plane straight on the runway while taking-off / landing when in "clean" configuration but when mouting the TPG, keeping it on the runway is really hard since it continuously try slew  to the right (the side owhere th TGP is mounted) and I have to apply an excessive amount of rudder to compensate.

Once in flight the problem is less annoying but I still have to compensate with the trim and from time to time correct the course.

I already saw this issue a lot of time ago (I've just restared with the Viper after some time spent on other planes) and I read somewhere that the problem was reduced in some previous update but IMHO it's still the same if not worse...

• No, there is no double rudder axis assignment: it is assigned to the TFRP pedals only.
• No, there is no pad/other controller connected to my PC except the warthog and TFRP (and M+K obviously).
• No, I don't  need to set a deadzone for the pedals: I alredy did it and it does not help. Moreover I've checked with the input control window (CTRL+ENTER) and the rudder axis is perfectly centered when the problem occurs.

 

Any help?

 

crosswind? i do not currently have an issue. i used to when i began the F-16 learning. i regularly take off with every hardpoint attached to something. if you think the TGP is making it lean, put the HTS on the other side. you do not have to have HARMs loaded to have it mounted.

Edited January 14, 2023 by silverdevil

[LordOrion]

18 minutes ago, silverdevil said:

crosswind? i do not currently have an issue. i used to when i began the F-16 learning. i regularly take off with every hardpoint attached to something. if you think the TGP is making it lean, put the HTS on the other side. you do not have to have HARMs loaded to have it mounted.

 

Unfortunately no, or at least the wind is not the sole cause of the problem: it occurs with 0knt wind too.

I've created a short video that shows it, just let me load it on YT.

Edited January 14, 2023 by LordOrion

[silverdevil]

2 minutes ago, LordOrion said:

Unfortunately no, the problem occurs with 0knt wind too.

I've created a short video that shows it, just let me load it on YT.

comprendere! i will also do one for comparison for you.

[LordOrion]

14 minutes ago, silverdevil said:

comprendere! i will also do one for comparison for you.

Thank you!

Here is mine:

 

Edited January 14, 2023 by LordOrion

[BIGNEWY]

Hi

we already have a open report for yaw with asymmetric loadouts

thank you