feetball Posted August 20, 2024 Posted August 20, 2024 (edited) This is what I see. Tried Caucasus, Marianas, and Nevada. Restarted, rebooted etc etc. Steam did update the game when I first started it today. Same with existing missions and new ones. Edited August 20, 2024 by feetball
Solution TKhaos Posted August 20, 2024 Solution Posted August 20, 2024 (edited) Start the game in MT, it's ST that is apparently causing the problem. Just noticed you are on Steam, probably already know how to get there but just in case Click on DCS World in your libriary then either click on the cog on the right side or right click the mouse on DCS World itself and select properties. On the General tab make sure the lauch option is Play MT Preview. Edited August 21, 2024 by TKhaos 2
feetball Posted August 20, 2024 Author Posted August 20, 2024 Da-dum-dumnmmmm! Captain Chaos to the rescue! That worked! Thank you! 1
TKhaos Posted August 20, 2024 Posted August 20, 2024 1 minute ago, feetball said: Da-dum-dumnmmmm! Captain Chaos to the rescue! That worked! Thank you! No problem, was just about to say if that didn't work then check your AV hasn't quarantined anything as they been going a bit loopy recently flagging files
Pleiades Posted August 21, 2024 Posted August 21, 2024 Weird, same issue here, did both recommendations as well as many more, same ocean blue on my maps. Hoping for an update fix.
OlegK Posted August 21, 2024 Posted August 21, 2024 2 часа назад, Pleiades сказал: Weird, same issue here, did both recommendations as well as many more, same ocean blue on my maps. Hoping for an update fix. Yes!!! This problem with all maps and ST and TM modes.
GspotMP Posted August 21, 2024 Posted August 21, 2024 What the.... allmost turned crazy on that (not that I`m crazy allready )! Had the same prob, thought I messed something up by playing arround with some scripts Thanks for the advise, work`s like it should again
ED Team BIGNEWY Posted August 21, 2024 ED Team Posted August 21, 2024 please ensure you are using MT DCS ST DCS is broken currently and will likely be removed from DCS thank you 1 Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status Windows 11, NVIDIA MSI RTX 3090, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 64GB DDR @3200, ASUS ROG Strix Z490-F Gaming, PIMAX Crystal
sirrah Posted August 21, 2024 Posted August 21, 2024 (edited) 7 hours ago, BIGNEWY said: please ensure you are using MT DCS ST DCS is broken currently and will likely be removed from DCS thank you I am using MT and also had this issue yesterday I only opened up the ME very briefly yesterday evening, so I thought it may have been some buffer issue, but reading this, it seems it wasn't. Edit: Tried again today after a quick repair and the map/land textures were showing again Edited August 21, 2024 by sirrah System specs: i7-8700K @stock speed - GTX 1080TI @ stock speed - AsRock Extreme4 Z370 - 32GB DDR4 @3GHz- 500GB SSD - 2TB nvme - 650W PSU HP Reverb G1 v2 - Saitek Pro pedals - TM Warthog HOTAS - TM F/A-18 Grip - TM Cougar HOTAS (NN-Dan mod) & (throttle standalone mod) - VIRPIL VPC Rotor TCS Plus with ALPHA-L grip - Pointctrl & aux banks <-- must have for VR users!! - Andre's SimShaker Jetpad - Fully adjustable DIY playseat - VA+VAICOM - Realsimulator FSSB-R3 ~ That nuke might not have been the best of ideas, Sir... the enemy is furious ~ GUMMBAH
ED Team BIGNEWY Posted August 21, 2024 ED Team Posted August 21, 2024 please attach your dcs log from a session where you have tried we will look for clues. Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status Windows 11, NVIDIA MSI RTX 3090, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 64GB DDR @3200, ASUS ROG Strix Z490-F Gaming, PIMAX Crystal
carbolicus Posted August 21, 2024 Posted August 21, 2024 I've got the same problem since the recent update. Hope it's fixed soon.
carbolicus Posted August 21, 2024 Posted August 21, 2024 Just to confirm, I am launching in MT and still have the problem, totally blue maps and the option for satellite etc at the bottom toolbar is also gone. I verified game files and still a problem.
nehmo Posted August 22, 2024 Posted August 22, 2024 (edited) I'm the Steam user. Game launcher set to MT. I have blue maps in mission editor and in game. Edited August 22, 2024 by nehmo 1
ED Team BIGNEWY Posted August 22, 2024 ED Team Posted August 22, 2024 1 minute ago, nehmo said: I'm the Steam user. Game launcher set to MT. I have blue maps in mission editor and in game. Hi, it will work if MT Preview is selected. Can you attach your dcs log from saved games dcs log folder, it will give us some clues. thank you Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status Windows 11, NVIDIA MSI RTX 3090, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 64GB DDR @3200, ASUS ROG Strix Z490-F Gaming, PIMAX Crystal
-Slim Chance- Posted August 22, 2024 Posted August 22, 2024 (edited) Thankyou, as a total DCS noob just training on the Caucasus map, this was confusing the heck out of me, I thought my AWACS must have been taken out or something. MT fixed it. Edited August 22, 2024 by -Slim Chance-
_Dar Posted August 22, 2024 Posted August 22, 2024 Hey, had this issue two days ago too. Playing with MT Preview did the trick for me. MT_dcs.log MT_no_issue.txt ST_dcs.log ST_issue.txt
sjhorsley Posted August 22, 2024 Posted August 22, 2024 (edited) I guess I don't understand MT thing. Never had steam only the standard install and getting the blue maps after last update. If I go through DCS_updater the maps return but my Tobi head tracker does not activate. If I go direct to the DCS.exe my head tracker activates but then I don't have the maps. I did a full repair scan and it came out fine. UPDATE I figured it out. head tracker was pointing to the DCS.exe file in the bin folder so I had to redirect it to bin-mt folder and copy the headtracker.dll file in the bin folder over to the bin-mt folder as well. Now all seems to work. Everything has always worked fine until this last update. Edited August 22, 2024 by sjhorsley
Edgehog Posted August 22, 2024 Posted August 22, 2024 On 8/20/2024 at 5:13 PM, TKhaos said: Start the game in MT, it's ST that is apparently causing the problem. Just noticed you are on Steam, probably already know how to get there but just in case Click on DCS World in your libriary then either click on the cog on the right side or right click the mouse on DCS World itself and select properties. On the General tab make sure the lauch option is Play MT Preview. Hi, old fart here! What is "MT"??
Rudel_chw Posted August 22, 2024 Posted August 22, 2024 16 minutes ago, Edgehog said: Hi, old fart here! What is "MT"?? MT stands for the multi-thread version of DCS, ST being the traditional Single-thread DCS For work: iMac mid-2010 of 27" - Core i7 870 - 6 GB DDR3 1333 MHz - ATI HD5670 - SSD 256 GB - HDD 2 TB - macOS High Sierra For Gaming: 34" Monitor - Ryzen 3600 - 32 GB DDR4 2400 - nVidia RTX2080 - SSD 1.25 TB - HDD 10 TB - Win10 Pro - TM HOTAS Cougar Mobile: iPad Pro 12.9" of 256 GB
carbolicus Posted August 24, 2024 Posted August 24, 2024 (edited) Getting very frustrated here - I have set Steam launcher to ‘Play MT Preview’, and also tried the ‘Steam VR MT’ option, rebooted PC numerous times and I still have the blue maps. Hence I can’t create meaningful missions now. Being not very computer literate, please can someone explain in simple words if I have to do anything else. Do I have to do something in the bin-mt folder, and if so, what? I have no mods apart from three aircraft, the Hercules, Skyhawk and VSN Mirage. Windows and everything else is completely up to date, and my anti-virus is solely Windows 11 Defender. Most people seem to simply launch with MT Preview and the maps come back. Why not for me? Edited August 24, 2024 by carbolicus
Rudel_chw Posted August 24, 2024 Posted August 24, 2024 2 hours ago, carbolicus said: Being not very computer literate, please can someone explain in simple words if I have to do anything else. I have no experience with the steam version of DCS, try to open a support ticket here: https://www.digitalcombatsimulator.com/en/support/ For work: iMac mid-2010 of 27" - Core i7 870 - 6 GB DDR3 1333 MHz - ATI HD5670 - SSD 256 GB - HDD 2 TB - macOS High Sierra For Gaming: 34" Monitor - Ryzen 3600 - 32 GB DDR4 2400 - nVidia RTX2080 - SSD 1.25 TB - HDD 10 TB - Win10 Pro - TM HOTAS Cougar Mobile: iPad Pro 12.9" of 256 GB
rob10 Posted August 24, 2024 Posted August 24, 2024 8 hours ago, carbolicus said: Getting very frustrated here - I have set Steam launcher to ‘Play MT Preview’, and also tried the ‘Steam VR MT’ option, rebooted PC numerous times and I still have the blue maps. Hence I can’t create meaningful missions now. Being not very computer literate, please can someone explain in simple words if I have to do anything else. Do I have to do something in the bin-mt folder, and if so, what? I have no mods apart from three aircraft, the Hercules, Skyhawk and VSN Mirage. Windows and everything else is completely up to date, and my anti-virus is solely Windows 11 Defender. Most people seem to simply launch with MT Preview and the maps come back. Why not for me? Check that you are actually ending up in MT. On the bottom right corner of the main screen is it showing MULTI-THREAD PREVIEW before the installed version number? If it's not, you're not launching MT for some reason. If it showing that, post your DCS logs because there's something different going on with your problem.
carbolicus Posted August 24, 2024 Posted August 24, 2024 33 minutes ago, rob10 said: Check that you are actually ending up in MT. On the bottom right corner of the main screen is it showing MULTI-THREAD PREVIEW before the installed version number? If it's not, you're not launching MT for some reason. If it showing that, post your DCS logs because there's something different going on with your problem. Yes, it seems that DCS is still only launching for me in ST! I’ve just launched it with both Steam set to ‘MT Preview’, and also using the .exe in the bin-mt folder, and I STILL only get the version number 2.9.7.59263 without ‘MULTI-THREAD PREVIEW’ showing before it. Can anyone tell me how to force DCS to launch in MT? Do I need to change a Windows setting somewhere? Everything else seems to be set correctly!
rob10 Posted August 24, 2024 Posted August 24, 2024 I don't use Steam so I can't help you on that side. I know people using Steam seem to run into this semi-regularly. Check the Steam Support section on here and maybe it'll give you some ideas.
Edgehog Posted August 25, 2024 Posted August 25, 2024 I do get a map in mission editor. However, when flying either in single player instant missions or the mission editor flying my mission I don't. Weird. I do not even get the F10 blue screen as above, with airbases and flying aircraft. I tried a repair but got nothing. Started from my windows explorer and tried the dcs.exe there from bin-mt... same thing.... no go!
Recommended Posts