Jump to content

Recommended Posts

Posted (edited)

I recently tried a Quest 3 as a potential replacement for the trusty G2. Although the cockpit was clearer I found the overall image quality outside worse plus I couldn’t get the same level of smoothness be it wired or with virtual desktop even with a dedicated wired access point after several weeks of tweaking. So I have returned to the G2.

VR can be subjective, I know others opinions will differ but I am very happy the Oasis driver extends the life of my preferred headset.

All working fine here with the Oasis driver and I have successfully upgraded to 24H2 without issues so it also feels good to be on the latest Windows. 

Again maybe against the flow I have always found using SteamVR as the OpenXR runtime smoother, so using SteamVR for the Oasis driver is a benefit for me .

Edited by Baldrick33

AMD 5800X3D · MSI 4080 · Asus ROG Strix B550 Gaming  · HP Reverb Pro · 1Tb M.2 NVMe, 32Gb Corsair Vengence 3600MHz DDR4 · Windows 11 · Thrustmaster TPR Pedals · VIRPIL T-50CM3 Base, Alpha Prime R. VIRPIL VPC Rotor TCS Base. JetSeat

Posted (edited)

Well, I had it working this morning before I left for work but turning it on now, I get a message that SteamVR failed. Specifically, "Oh no! SteamVR has encountered an unexpected problem."

Anyone have any suggestions?

Update: It did eventually start, and I successfully flew on a server. However, after closing DCS and SteamVR, I am now getting a SteamVR error regarding my GPU have trouble communicating with the HMD. I had this during setup, but a fresh install of Steam seemed to fix it. I tried all the available Displayports with no change.

 

Edited by Cab
Posted

Well my experience has been great. I am having better Frametimes in DCS compared to what it was before.. The apache I flew 2 MP Missions and they both were flawless no issues at all..

 

For what I paid for it I am not going to complain at all. Mbucchia is a legend in my mind..

Intel Ultra 265K 5.5GHZ   /  Gigabyte Z890 Aorus Elite  /  MSI 4070Ti Ventus 12GB   /  SoundBlaster Z SoundCard  /  Corsair Vengance 64GB Ram  /  HP Reverb G2  /  Samsung 980 Pro 2TB Games   /  Crucial 512GB M.2 Win 11 Pro 21H2 /  ButtKicker Gamer  /  CoolerMaster TD500 Mesh V2 PC Case

Posted (edited)
12 hours ago, Cab said:

Well, I had it working this morning before I left for work but turning it on now, I get a message that SteamVR failed. Specifically, "Oh no! SteamVR has encountered an unexpected problem."

Anyone have any suggestions?

Update: It did eventually start, and I successfully flew on a server. However, after closing DCS and SteamVR, I am now getting a SteamVR error regarding my GPU have trouble communicating with the HMD. I had this during setup, but a fresh install of Steam seemed to fix it. I tried all the available Displayports with no change.

 

FYI completely uninstalling then reinstalling all Steam software and the Oasis driver got everything working again. I just had a great time in the Contention Cold War server with no issues.

Thanks again @mbucchia

Edited by Cab
  • Like 1
Posted
8 hours ago, Cab said:

FYI completely uninstalling then reinstalling all Steam software and the Oasis driver got everything working again. I just had a great time in the Contention Cold War server with no issues.

Thanks again @mbucchia

@mbucchia I didn't see this reported anywhere else, so I'll write it here. 

Received this error again this morning trying to turn on VR for the first time after PC start:

image.png

After doing some hardware troubleshooting and reinstalling the Oasis driver with no effect, I uninstalled (again) all Steam software using the Revo Uninstaller, then reinstalled Steam and Oasis. To my relief, SteamVR worked again and DCS started in VR with no issues.

Posted

Waiting on a Bluetooth Dongle from Amazon as the G2 controllers won't pair in Windows 11...does Microsoft suck? Ask anyone that has a G2...LOL! Lots of people will be able to play in VR again thanks to Mbucchia!

Posted

I transition to win 11 24h2 via to learn neither my headset (reverb G2) nor rudder paddles (CH/Saitek) are working. The later became usable again after disabling core isolation...

Sorry for sidetracking, bottom line, I converted to Steam VR with the OASIS driver and also found improved average FPS. Since tweaked my setup to have a 20-30% overhead, I maintain my 90 FPS even in more demanding situations as the overhead then just goes down to zero. 

As for the sharpness, I've some distrust in SteamVR reporting it correctly. After also perceivedly seeing a but more blurryness, I set the resolution from 100 to 150% in SteamVR, which didn't have a noticable performance impact, but also little impact on picture sharpness, but I feel risky got me back to WMR standards.

After feeling the improved smoothness from the OASIS/SteamVR combo, I felt daring and increased demand by setting FXAA and MSAA from 2/2 to 16/4. The averaged FPS were maintained, but in the 'extreme' situations, the stutter was more felt than with WMR.

=> I feel that it has been tweaked for higher FPS and reactivity, but at the price of you run out of overhead, the stutters are more noticable. Thus,I would recommend to choose your settings with enough headroom for your targeted FPS, like DCS to that target, and you'll enjoy more smoothness! 

Please take everything with a grain of salt, I transition from Windows 11 23h2 to 24h2, where I found a loss of 20% of performance (repeatedly) for the regular 3Dmark Timespy benchmark, but had slightly better performance in the extreme version of it. So thanks @mbucchia for your devotion to VR, from OpenXR tools to OASIS driver to going against Meta for locking everyone else out!

Posted

Slight problem need help with…Installed the Oasis driver for my old G2. IL-2 runs fine no problems on max settings and 150 res in SteamVR, and runs smooth (thanks Matthieu!). So I tried DCS and it loads ok, but if you try to select multiplayer, quick flight, or mission files, it starts with the intro pic of an airplane and then just gives a little pic that says “Waiting”, and won’t start the action? Tried lower res in SteamVR and in DCS, and still does the Waiting little box and that’s it…??? Help!

Posted
8 hours ago, Thorns said:

Slight problem need help with…Installed the Oasis driver for my old G2. IL-2 runs fine no problems on max settings and 150 res in SteamVR, and runs smooth (thanks Matthieu!). So I tried DCS and it loads ok, but if you try to select multiplayer, quick flight, or mission files, it starts with the intro pic of an airplane and then just gives a little pic that says “Waiting”, and won’t start the action? Tried lower res in SteamVR and in DCS, and still does the Waiting little box and that’s it…??? Help!

You might try here; there is an issue about being stuck. 

Known Issues · mbucchia/Oasis-Driver-for-Windows-Mixed-Reality Wiki · GitHub

 

Posted
8 hours ago, MattM1121 said:

You might try here; there is an issue about being stuck. 

Known Issues · mbucchia/Oasis-Driver-for-Windows-Mixed-Reality Wiki · GitHub

Nice and thanks

Spoiler

Dell XPS 9730, i9-13900H, DDR5 64GB, Discrete GPU: NVIDIA GeForce RTX 4080, 1+2TB M.2 SSD | Thrustmaster Warthog HOTAS + TPR | TKIR5/TrackClipPro | Total Controls Multi-Function Button Box | Dell 32 4K UHD Gaming Monitor G3223Q | Win 11 Pro

 

Posted (edited)

Last couple of tries I am getting vrserver.exe hard error.

Anyone got any fix or info for this?

Thanks in advance

Edited by aceviper
Posted

If you're on the SteamVR Beta (2.13) please opt out for now. There's an issue with it that will be solved shortly. 

  • Thanks 3

I wasn't banned, but this account is mostly inactive and not monitored.

Posted

Hi @mbucchia I don't know if you've had anyone else report this, but I didn't see it described anywhere else here or on Steam.

BLUF Oasis works great for me every time I install it. When done flying, I turn off my headset and SteamVR.

The next time I restart my headset and SteamVR, I consistently get the message below about my GPU having trouble communicating with my headset. After uninstalling/reinstalling Steam/SteamVR/Oasis, it works again. This has happened every time without fail.

Thank you

 

Screenshot 2025-09-03 053504.png

Posted

I stupidly deleted C:\ProgramData\Hololens and now I have a lifeless headset with no driver.

If anyone could upload said file/folder or offer some assistance I would be hugely grateful.

VR is on its last legs with me.

Cost..hoops to jump through...cost to performance ratio.

Never ending drama.

But my wallet stays closed forever to anything related to that company!

Posted
20 minutes ago, aceviper said:

I stupidly deleted C:\ProgramData\Hololens and now I have a lifeless headset with no driver.

If anyone could upload said file/folder or offer some assistance I would be hugely grateful.

VR is on its last legs with me.

Cost..hoops to jump through...cost to performance ratio.

Never ending drama.

But my wallet stays closed forever to anything related to that company!

I just checked and don't have that folder. I only have C:\ProgramData\WindowsHolographicDevices. 

Posted (edited)

Maybe that one if you would be so kind thanks.

edit...the light is on the headset but no picture yet.

Will keep plugging away

 

Edited by aceviper
Posted (edited)
14 minutes ago, aceviper said:

Maybe that one if you would be so kind thanks

 

I don't have a problem with doing that, but I have deleted that folder a couple of times myself and it always gets recreated.

Deleting that folder shouldn't matter, I think. It's one of the steps @mbucchia provides for clearing environment data: Troubleshooting Guide · mbucchia/Oasis-Driver-for-Windows-Mixed-Reality Wiki · GitHub

 

Edited by Cab
  • Like 1
Posted
On 9/10/2025 at 4:27 AM, aceviper said:

Maybe that one if you would be so kind thanks.

edit...the light is on the headset but no picture yet.

Will keep plugging away

 

That folder contains your room data. Having someone else send you theirs will not work  obviously. 

 

If you want to revert to Mixed Reality Portal, follow the "deep cleaning" instructions on the wiki, and reinstall Mixed Reality Portal as well.

I wasn't banned, but this account is mostly inactive and not monitored.

Posted (edited)

Thanks @mbucchia

Just wanted to say everytime I start Steamvr the Oasis addon is blocked due to crash.

Unblock it..restart Steamvr and it blocked again.

Headset not detected but is seen in unlock procedure.

But will try your solution.

Thank you for your time and patience with this idiot.

I initially installed it correctly but with one caveat.

I was getting massive stutters/framedrops looking left and right quickly..they were not present previously prior to Oasis upgrade.

 

ps....am gladly waiting to contribute on your wiki page when this gets bedded in and resolved.

Edited by aceviper
Posted (edited)
On 9/10/2025 at 2:19 AM, Cab said:

The next time I restart my headset and SteamVR, I consistently get the message below about my GPU having trouble communicating with my headset. After uninstalling/reinstalling Steam/SteamVR/Oasis, it works again. This has happened every time without fail.

 

 

 

I have similar issue, but switching to 60 fps and then back again to 90 fps seems to fix it for me..

 

Edited by philstyle
  • Thanks 1

On YouTube: https://www.youtube.com/philstylenz

Storm of War WW2 server website: https://stormofwar.net/

 

Posted

I have two questions. Am using a reverb G2, windows 11.

1. As per the uploaded screenshot. DCS itself does not show in the list of applications under video>per application settings. Do I need to add DCS somehow to this list, or do I use one of those existing apps to set the settings which will apply to DCS?

2. Is there a way to enable a foveated-type rendering now, similar to what we could do with openXR toolkit?

 

null

image.jpeg

On YouTube: https://www.youtube.com/philstylenz

Storm of War WW2 server website: https://stormofwar.net/

 

Posted
2 hours ago, philstyle said:

 

I have similar issue, but switching to 60 fps and then back again to 90 fps seems to fix it for me..

 

I'll try that the next time, thanks.

Posted
4 hours ago, philstyle said:

 

I have similar issue, but switching to 60 fps and then back again to 90 fps seems to fix it for me..

 

 

1 hour ago, Cab said:

I'll try that the next time, thanks.

HERO!!! :yay::thumbup::thumbsup::worthy::punk: THAT WORKED!

Thank you, @mbucchia for all your work on the Oasis app. And thank you @philstyle for carrying me over that last hurdle. The long national nightmare is finally over. 

  • Like 1
Posted (edited)
7 hours ago, philstyle said:

I have two questions. Am using a reverb G2, windows 11.

1. As per the uploaded screenshot. DCS itself does not show in the list of applications under video>per application settings. Do I need to add DCS somehow to this list, or do I use one of those existing apps to set the settings which will apply to DCS?

2. Is there a way to enable a foveated-type rendering now, similar to what we could do with openXR toolkit?

 

null

image.jpeg

In my experience DCS needs to be running for it to show up in the list.

Quadviews does the fixed foveated rendering for the G2 though I could not get it to work with the Oasis driver, the mission would hang on startup. Only tried it briefly, not sure if it is a known issue? Disabling it fixed it.

Edited by Baldrick33

AMD 5800X3D · MSI 4080 · Asus ROG Strix B550 Gaming  · HP Reverb Pro · 1Tb M.2 NVMe, 32Gb Corsair Vengence 3600MHz DDR4 · Windows 11 · Thrustmaster TPR Pedals · VIRPIL T-50CM3 Base, Alpha Prime R. VIRPIL VPC Rotor TCS Base. JetSeat

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...