Is RSBN car compatible with RETURN mode?

[Michael-Fr]

Hello,
Is the RSBN car compatible with RETURN mode? Do I then have to assign two frequencies (IN and OUT) and repeat them on the MIG 29's ADF settings?

Do these beacons have to respect spacing limits (at least 10 miles apart, for example)?

And finally, is it beneficial to orient them judiciously when placing them on a map (one direction they transmit better than another)?

Sincerely,
Michael

[Jef Costello]

As far as I know RSBN beacon is similar to a Tacan. I don't think "RETURN" mode works for a RSBN, I suppose you need a PRGM in order to get "RETURN" mode working. 

[NineLine]

As explained in the video, Return mode is based on the aerodrome selected on the NAV panel. The RSBN though can be used to correlate the Point accuracy with the INS (CORR).

Once within range and on course, it will automatically switch to Landing mode, assuming the PRGM units are set up correctly.
 

 

[Michael-Fr]

Indeed, but I am trying to apply this to airfields that do not have them, by implementing the beacon tutorial :

 

 

[Raven (Elysian Angel)]

7 minutes ago, Michael-Fr said:

Indeed, but I am trying to apply this to airfields that do not have them, by implementing the beacon tutorial :

 

 

Works perfectly on my end: I implemented it in one of my own missions yesterday.

[NineLine]

1 hour ago, Michael-Fr said:

Indeed, but I am trying to apply this to airfields that do not have them, by implementing the beacon tutorial :

 

 

Can you share your mission (.miz) we can take a look and see if we can help.

[Michael-Fr]

Mig 29-Kola-test.miz

[edineygomes]

Hi!

I opened your mission here. According to the tutorial, the PRMG Localizer should be at the end of the runway, in the direction you will land, 200 meters from the end of the runway.

Also your DTC is missing the airport RSBN and PRMG data.

I changed your mission as I understood in the tutorial. I couldn't get it to work, but I believe that's it.

However, even following the tutorial, I can't get the system to detect the automatic RSBN via DTC using the return option. If I activate the landing key, it retrieves the RSBN manually.

 

 

Mig 29-Kola-test FIX.miz

Edited 2 hours ago by edineygomes

[Michael-Fr]

My PMRG localizer beacons were indeed misplaced.
I see you've modified the RSBN points in the DTC to match the airport ones.
My approach is different, using the RSBN points from the DTC to define my route as waypoints.
When I switch to airport channels from the cockpit, I manually set the RSBN and PMRG channels for the chosen airport.

I noticed my other mistake was trying to use RETURN mode with my airports 2 or 3; this mode only seems to point to airport 1 programmed on the DTC.
I'll test again.

I am attaching a file of my corrected mission.

Mig 29-Kola-test.miz

And I take advantage of this thread to point out that I do not receive the sound feedback from the glyde and the alignment during landing .. moreover I would like to add an ADF beacon to be able to listen to the morse code emitted by the latter (but I do not know if this is possible, nor how to configure this from the mission editor)

[Raven (Elysian Angel)]

27 minutes ago, Michael-Fr said:

I noticed my other mistake was trying to use RETURN mode with my airports 2 or 3; this mode only seems to point to airport 1 programmed on the DTC.

When you press the Return button, the system automatically switches to Aerodrome 1 yes, but you can manually set it to 2 or 3 by pushing their respective buttons.