Bahger Posted November 15, 2010 Posted November 15, 2010 (edited) I can't figure out which keys are currently unassigned by the sim I generally map TIR on/off and recenter to my HOTAS but I'm also wondering if you TIR users are using zoom. I'll need to find spare keys for Teamspeak PTT and FRAPS on/off too, so any info re. unused keys would be very welcome. I tried INS AND DEL for FRAPS but there were conflicts. Edited November 15, 2010 by Bahger
ronht Posted November 15, 2010 Posted November 15, 2010 Arrow Up = Recenter Arrow Down = On/Off Then clear them in the options control area of the sim as you don't need them if you have a joystick. The other two arrow keys - left and right can be used for the rest
Bulletstop Posted November 15, 2010 Posted November 15, 2010 Numpad - and numpad / for percision on and off. Bullet I7 4790K running at 4390 with a gigabyte board with 16 gigs of ram with an Asus gtx 660-ti and 2 tb of hard drive space on 2 wd hard drives. A X-65F Hotas with trackir4 and pro combat peddles. A kick butt home built machine unfortunately running a windows 7 OS.
Slammin Posted November 15, 2010 Posted November 15, 2010 cntl-F12=center, cntl-F9=on/off is safe to use. Abit IN9 32x MAX- Kentsfield QX6700 @3520 1.5 vcore watercooled D-Tek Fuzion/PA-160/MCR120/2x MCP655 2x2GB G-Skill 1066 5-5-5-15 2T@1.9vdimm 2x EVGA 580GTX 1.5GB SLI 2x 74GB Sata Raptor Raid0 2x 320GB Hitachi Sata II X-FI Elite Pro Dell U3011 Lian Li V2100B Corsair HX1000
Cali Posted November 15, 2010 Posted November 15, 2010 I use key pad, * precision - on/off + recenter i7-4820k @ 3.7, Windows 7 64-bit, 16GB 1866mhz EVGA GTX 970 2GB, 256GB SSD, 500GB WD, TM Warthog, TM Cougar MFD's, Saitek Combat Pedals, TrackIR 5, G15 keyboard, 55" 4K LED
kylania Posted November 15, 2010 Posted November 15, 2010 Shift+F7 = Presicion TIR Shift+F9 = Pause TIR Shift+F12 = Recenter TIR NumPad 5 = Recenter in game view NumEnter = Recenter Zoom INCR/DECR Slider on Throttle = Zoom Axis Mic Switch Up = PTT [sIGPIC][/sIGPIC] Christmas Cheer - A Landing Practice Mission : Beta Paint Schemes : HOTAS Keyboard Map : Bingo Fuel - A DCS A-10C Movie
Mugenjin Posted November 15, 2010 Posted November 15, 2010 I only need/use TIR Center and Pause: RCtrl+F11 and RCtrl+F12
Loz Posted November 15, 2010 Posted November 15, 2010 Shift+F7 = Presicion TIR Shift+F9 = Pause TIR Shift+F12 = Recenter TIR NumPad 5 = Recenter in game view NumEnter = Recenter Zoom INCR/DECR Slider on Throttle = Zoom Axis Mic Switch Up = PTT These are exactly what I use too. :thumbup: i9 9900x at 5.1 Ghz // ASUS ROG Maximus XI Formula EK Bloc // 64Gb Corsair Vengence 3600Mhz DDR4 Ram // Gigabyte Aorus 3090 Watercooled block//Samsung SM951 M2 x4 SSD // Windows 10 64 Bit //48inch LG48 @ 3840x2160 120Hz//Asus ROG Swift PG35VQ 3440 x 14440 144Hz // TM Warthog HOTAS (Ser. No. 00836) //MFG Crosswind Pedals // TrackIR 5 //Varjo Aero An old pilot is one who remembers when flying was dangerous and sex was safe. My YouTube DCS World Four Screen Videos
Kuky Posted November 15, 2010 Posted November 15, 2010 Numpad * and / for centre and on/off PC specs: Windows 11 Home | Asus TUF Gaming B850-Plus WiFi | AMD Ryzen 7 9800X3D + LC 360 AIO | MSI RTX 5090 LC 360 AIO | 55" Samsung Odyssey Gen 2 | 64GB PC5-48000 DDR5 | 1TB M2 SSD for OS | 2TB M2 SSD for DCS | NZXT C1000 Gold ATX 3.1 1000W | TM Cougar Throttle, Floor Mounted MongoosT-50 Grip on TM Cougar board, MFG Crosswind, Track IR
CrashEd Posted November 15, 2010 Posted November 15, 2010 If you have the new Warthog stick, I read that you can assign button presses rather than keys in v5 of the TIR software. I haven't tried it yet, but it could be another option :)
hassata Posted November 15, 2010 Posted November 15, 2010 Scroll Lock, Alt Scroll Lock, Shift Scroll Lock. [sIGPIC][/sIGPIC]
104th_Crunch Posted November 15, 2010 Posted November 15, 2010 I use one hat from my joystick. Hat Up - Field of View zoom Hat down - FOV zoom back Hat Left - TIR Center Hat left + shift - TIR Pause Hat right - Teamspeak All use directx button presses, not keystrokes. Doing this I could not make a 1 for 1 copy of the actual A-10C stick with my CH stick, but real A-10C pilots don't use TIR and zoom :)
Bahger Posted November 15, 2010 Author Posted November 15, 2010 Thanks guys. Hey Crunch, or any one of you, can you advise me on a small issue with TIR and A-10? I haven't used TIR in about a year now (I have TIR 5) but it looked to me when I fired it up that it updates itself via the user GUI; when I updated this way, A-10 found its way into the games list. However, 2 problems occured: - The Pause, Recenter and Precision commands don't "stick" when I change the key assignments and I have to do it again every time I start TIR. - The above commands, default or changed, work perfectly in the TIR camera screen, whether sent from my keyboard or from my CH HOTAS, but they never work in the sim. I'm wondering if the integrated updater is something minor and maybe I need to uninstall my current, year-old TIR software/drivers the old-fashioned way, in Windows and install the new ones (Beta 5.0?). Can anyone advise? Many thanks.
Mugenjin Posted November 15, 2010 Posted November 15, 2010 Thanks guys. Hey Crunch, or any one of you, can you advise me on a small issue with TIR and A-10? I haven't used TIR in about a year now (I have TIR 5) but it looked to me when I fired it up that it updates itself via the user GUI; when I updated this way, A-10 found its way into the games list. However, 2 problems occured: - The Pause, Recenter and Precision commands don't "stick" when I change the key assignments and I have to do it again every time I start TIR. - The above commands, default or changed, work perfectly in the TIR camera screen, whether sent from my keyboard or from my CH HOTAS, but they never work in the sim. I'm wondering if the integrated updater is something minor and maybe I need to uninstall my current, year-old TIR software/drivers the old-fashioned way, in Windows and install the new ones (Beta 5.0?). Can anyone advise? Many thanks. Just to make sure: Did you save your profile after changing the hotkeys? And make sure the right profile is associated with the game, since hotkeys may be changed according to the profile. Or you can just use 1 profile for every game (tick "exclusive" box).
104th_Crunch Posted November 15, 2010 Posted November 15, 2010 Thanks guys. Hey Crunch, or any one of you, can you advise me on a small issue with TIR and A-10? I haven't used TIR in about a year now (I have TIR 5) but it looked to me when I fired it up that it updates itself via the user GUI; when I updated this way, A-10 found its way into the games list. However, 2 problems occured: - The Pause, Recenter and Precision commands don't "stick" when I change the key assignments and I have to do it again every time I start TIR. - The above commands, default or changed, work perfectly in the TIR camera screen, whether sent from my keyboard or from my CH HOTAS, but they never work in the sim. I'm wondering if the integrated updater is something minor and maybe I need to uninstall my current, year-old TIR software/drivers the old-fashioned way, in Windows and install the new ones (Beta 5.0?). Can anyone advise? Many thanks. For the commands not being saved, I get this as well. Make your changes to the profile, then click the save icon. Then go to games list and select the profile beside the listing for A-10C. Then EXIT the TIR software. Don't start your sim, exit the TIR software then start again to verify changes were saved. Make sure if you have Win 7 64bit or Vista 64 bit that when when you install A-10C, you choose the x86 files to install. The 64-bit version of A-10C is not supported by the TIR software. If you are using a 32-bit operating system, then this is not an issue as the x86 files are installed by default.
Bahger Posted November 15, 2010 Author Posted November 15, 2010 Thanks. I have only attempted to run TIR in the 32-bit A-10 executable, so that would not appear to be the problem. I'm sure the profile saving procedures you guys suggest will cure that issue. Most baffling (and troublesome) is the failure of the TIR commands in-game. I'm probably missing something very obvious, such as installing updated TIR drivers/software in Windows, but I'm hoping that someone can confirm whether this is necessary or if the updater in the TIR GUI covers this.
Recommended Posts