Deadman Posted August 9, 2012 Author Share Posted August 9, 2012 (edited) Roger that I appreciate the order Current interested listed members please confirm your intentions to order covers Church CONFIRMED Zlin CONFIRMED Falcon52 CONFIRMED Peyoteros CONFIRMED X3 Rhinox CONFIRMED Rockmonster2au Daryl1586 CONFIRMED Whisky One BruceRobertson CONFIRMED y2kiah CONFIRMED Markeebo JCook CONFIRMED Stano CONFIRMED cichlidfan CONFIRMED X2 Slayer CONFIRMED 15 out of 25 CONFIRMED Your half way there girls better Let your friends know this will be the last run with remove before flight flag ever price have doubled on them. I had to make a decision to purchase enough for 25 units or not used the flags. Well I just spent quite a bit on the flags get the word out I can not have these sitting on a shelf thanks Edited August 9, 2012 by Deadman https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Slayer Posted August 9, 2012 Share Posted August 9, 2012 Deadman you can put me down for 1 set of covers too. Sick of dusting off my WH :P [sIGPIC][/sIGPIC] System Specs Intel I7-3930K, Asrock EXTREME9, EVGA TITAN, Mushkin Chronos SSD, 16GB G.SKILL Ripjaws Z series 2133, TM Warthog and MFD's, Saitek Proflight Combat pedals, TrackIR 5 + TrackClip PRO, Windows 7 x64, 3-Asus VS2248H-P monitors, Thermaltake Level 10 GT, Obutto cockpit Link to comment Share on other sites More sharing options...
Deadman Posted August 9, 2012 Author Share Posted August 9, 2012 (edited) Roger that Slayer I appreciate the order you are on the list Current interested listed members please confirm your intentions to order covers Markeebo Rockmonster2au Whisky One Church CONFIRMED Zlin CONFIRMED Falcon52 CONFIRMED Peyoteros CONFIRMED X3 Rhinox CONFIRMED Daryl1586 CONFIRMED BruceRobertson CONFIRMED y2kiah CONFIRMED JCook CONFIRMED Stano CONFIRMED cichlidfan CONFIRMED X2 Slayer CONFIRMED Runibl CONFIRMED 16 out of 25 CONFIRMED Your half way there girls better Let your friends know this will be the last run with remove before flight flag ever price have doubled on them. I had to make a decision to purchase enough for 25 units or not used the flags. Well I just spent quite a bit on the flags get the word out I can not have these sitting on a shelf thanks __________________ Edited August 9, 2012 by Deadman https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Runibl Posted August 9, 2012 Share Posted August 9, 2012 Missed it the first time around, since i couldn't afford it at the time. So i'm glad to see another run. Count me in for 1 set Runi. "IceCat" Printable A5 F/A-18C Checklist Win 10 Pro 64bit, ASUS Maximus XI Hero, Intel Core I7 9700K @4.7 - 4.9 GHz, Nvidia Asus GeForce GTX 1080TI 11Gb, G.Skill TridentZ RGB DDR4-3200 C16 DC - 32GB (2x(2x8Gb)), Samsung 870 NVME + Multiple Samsung 850 & 860 EVO SSDs, Dell P2414H & U2414H Monitors. Link to comment Share on other sites More sharing options...
Deadman Posted August 9, 2012 Author Share Posted August 9, 2012 (edited) Roger that Runibl I appreciate the order you are on the list Current interested listed members please confirm your intentions to order covers Markeebo Rockmonster2au Whisky One Church CONFIRMED Zlin CONFIRMED Falcon52 CONFIRMED Peyoteros CONFIRMED X3 Rhinox CONFIRMED Daryl1586 CONFIRMED BruceRobertson CONFIRMED y2kiah CONFIRMED JCook CONFIRMED Stano CONFIRMED cichlidfan CONFIRMED X2 Slayer CONFIRMED Runibl CONFIRMED 352nd Persecutor CONFIRMED 16 out of 25 CONFIRMED Your half way there girls better Let your friends know this will be the last run with remove before flight flag ever price have doubled on them. I had to make a decision to purchase enough for 25 units or not used the flags. Well I just spent quite a bit on the flags get the word out I can not have these sitting on a shelf thanks Edited August 9, 2012 by Deadman https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
352nd Persecutor Posted August 9, 2012 Share Posted August 9, 2012 Count me in as well, 1 set. How does one go about placing the order? [sIGPIC][/sIGPIC] A proud member of the 352nd VirtualFighter Group. 18 years strong. Link to comment Share on other sites More sharing options...
Deadman Posted August 9, 2012 Author Share Posted August 9, 2012 (edited) Roger that 352nd Persecutor I appreciate the order you are on the list Please subscribe to the thread for ordering instructions thanks Current interested listed members please confirm your intentions to order covers Markeebo Whisky One Rockmonster2au CONFIRMED Church CONFIRMED Zlin CONFIRMED Falcon52 CONFIRMED Peyoteros CONFIRMED X3 Rhinox CONFIRMED Daryl1586 CONFIRMED BruceRobertson CONFIRMED y2kiah CONFIRMED JCook CONFIRMED Stano CONFIRMED cichlidfan CONFIRMED X2 Slayer CONFIRMED Runibl CONFIRMED 352nd Persecutor CONFIRMED 17 out of 25 CONFIRMED Your half way there girls better Let your friends know this will be the last run!!! The remove before flight flag price have more than doubled. I had to make a decision to purchase enough for 25 units or not used the flags. Well I just spent quite a bit on the flags get the word out I can not have these sitting on a shelf thanks. Edited August 9, 2012 by Deadman https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Dastardly Posted August 9, 2012 Share Posted August 9, 2012 I would like a set Is my callsign "Dastardly" too long? Anyway, put me down for a set~ Link to comment Share on other sites More sharing options...
Deadman Posted August 9, 2012 Author Share Posted August 9, 2012 (edited) Rockmonster2au was missed before and is now on confirmed list. Please subscribe to the thread for ordering instructions thanks Current interested listed members please confirm your intentions to order covers Markeebo Whisky One Rockmonster2au CONFIRMED Church CONFIRMED Zlin CONFIRMED Falcon52 CONFIRMED Peyoteros CONFIRMED X3 Rhinox CONFIRMED Daryl1586 CONFIRMED BruceRobertson CONFIRMED y2kiah CONFIRMED JCook CONFIRMED Stano CONFIRMED cichlidfan CONFIRMED X2 Slayer CONFIRMED Runibl CONFIRMED 352nd Persecutor CONFIRMED Dastardly CONFIRMED 19 out of 25 CONFIRMED Your half way there girls better Let your friends know this will be the last run!!! The remove before flight flag price have more than doubled. I had to make a decision to purchase enough for 25 units or not used the flags. Well I just spent quite a bit on the flags get the word out I can not have these sitting on a shelf thanks. Edited August 9, 2012 by Deadman https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Deadman Posted August 9, 2012 Author Share Posted August 9, 2012 AS posted before the information on embroidery No images or logos. Let wait for the 25 orders before we bring up working with custom fonts at this time . Brush script and Verdana Will be offered for an additional charge normal limit on the call sign length is 9 letter for a top embroidery of the throttle cover, or special 11 letters on special order on the side of the throttle cover for an additional charge. Is my callsign "Dastardly" too long? Anyway, put me down for a set~ https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Deadman Posted August 9, 2012 Author Share Posted August 9, 2012 (edited) Whisky Oneis now on confirmed list. Please subscribe to the thread for ordering instructions thanks Current interested listed members please confirm your intentions to order covers Markeebo Whisky One CONFIRMED Rockmonster2au CONFIRMED Church CONFIRMED Zlin CONFIRMED Falcon52 CONFIRMED Peyoteros CONFIRMED X3 Rhinox CONFIRMED Daryl1586 CONFIRMED BruceRobertson CONFIRMED y2kiah CONFIRMED JCook CONFIRMED Stano CONFIRMED cichlidfan CONFIRMED X2 Slayer CONFIRMED Runibl CONFIRMED 352nd Persecutor CONFIRMED Dastardly CONFIRMED 20 out of 25 CONFIRMED Your half way there girls better Let your friends know this will be the last run!!! The remove before flight flag price have more than doubled. I had to make a decision to purchase enough for 25 units or not used the flags. Well I just spent quite a bit on the flags get the word out I can not have these sitting on a shelf thanks. From post 570 Once there are 25 confirmed orders the member that have ordered will receive a pm with instructions on how to make their order through Pay Pal. If you don't like Pay Pal well that is a problem. I need to check on the curent prices of materials to calculate the cost but it should be in the ranges of a plain cover about $35.00 9 letter top of the throttle $40 and 11 letters Right side of the throttle cover at about $45 do to the extra cost of material and test runs. Shipping will be with USPS first class air mail in and out side of the states out side of the States there is no insurance or tracking but it is the cheapest method of delivery . I have not lost one cover with this type of postage. I will check on current cost and post the rates here Edited August 9, 2012 by Deadman https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
kylania Posted August 9, 2012 Share Posted August 9, 2012 So glad these are back! I have my set already, but I'm definitely sharing this thread with my friends who were so jealous of my covers. :) [sIGPIC][/sIGPIC] Christmas Cheer - A Landing Practice Mission : Beta Paint Schemes : HOTAS Keyboard Map : Bingo Fuel - A DCS A-10C Movie Link to comment Share on other sites More sharing options...
Dastardly Posted August 9, 2012 Share Posted August 9, 2012 (edited) Still would like a set regardless of whether or not I can have it embroidered~ I shared a link as well as a pic on our site Custom covers on the 72nd VFW Edited August 9, 2012 by Dastardly Link to comment Share on other sites More sharing options...
Deadman Posted August 9, 2012 Author Share Posted August 9, 2012 Hey Thanks for spreading the word on these there are only 6 slots left we will let this go over the week end and see what happens Thanks DM https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Deadman Posted August 9, 2012 Author Share Posted August 9, 2012 Dastardly is 9 letters it should fit fine on the top of the throttle or on the right side depending on how much you want to spend on the embroidery Still would like a set regardless of whether or not I can have it embroidered~ https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Dastardly Posted August 9, 2012 Share Posted August 9, 2012 Dastardly is 9 letters it should fit fine on the top of the throttle or on the right side depending on how much you want to spend on the embroidery I have no idea what the costs are...lol! Can you share that info on the first thread folks see? Thanks! :) Link to comment Share on other sites More sharing options...
Deadman Posted August 9, 2012 Author Share Posted August 9, 2012 (edited) I am not sure what post is the first one people see usually the last one for me, and there is no way I can just keep posting it these are just estimates I just have a ruff estimate at this point as posted before Once there are 25 confirmed orders the member that have ordered will receive a pm with instructions on how to make their order through Pay Pal. If you don't like Pay Pal well that is a problem. I need to check on the current prices of materials to calculate the cost but it should be in the ranges of a plain cover about $35.00 9 letter top of the throttle $40 and up to 11 letters on the Right side of the throttle cover at about $45 do to the extra cost of material and test runs. Shipping will be with USPS first class air mail in and out side of the states out side of the States there is no insurance or tracking but it is the cheapest method of delivery . I have not lost one cover with this type of postage. I will check on current cost and post the rates here I have no idea what the costs are...lol! Can you share that info on the first thread folks see? Thanks! :) Edited August 9, 2012 by Deadman https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Dastardly Posted August 9, 2012 Share Posted August 9, 2012 Sounds reasonable to me. I'd like my callsign on mine :D Link to comment Share on other sites More sharing options...
Deadman Posted August 9, 2012 Author Share Posted August 9, 2012 You will have that option when you order https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Deadman Posted August 9, 2012 Author Share Posted August 9, 2012 (edited) Updated Whisky Oneis now on confirmed list. Please subscribe to the thread for ordering instructions thanks Current interested listed members please confirm your intentions to order covers Markeebo Whisky One CONFIRMED Rockmonster2au CONFIRMED Church CONFIRMED Zlin CONFIRMED Falcon52 CONFIRMED Peyoteros CONFIRMED X3 Rhinox CONFIRMED Daryl1586 CONFIRMED BruceRobertson CONFIRMED y2kiah CONFIRMED JCook CONFIRMED Stano CONFIRMED cichlidfan CONFIRMED X2 Slayer CONFIRMED Runibl CONFIRMED 352nd Persecutor CONFIRMED Dastardly CONFIRMED Stubbies2003 CONFIRMED geo111 CONFIRMED Gangster CONFIRMED 23 out of 25 CONFIRMED Your half way there girls better Let your friends know this will be the last run!!! The remove before flight flag price have more than doubled. I had to make a decision to purchase enough for 25 units or not used the flags. Well I just spent quite a bit on the flags get the word out I can not have these sitting on a shelf thanks. From post 570 Once there are 25 confirmed orders the member that have ordered will receive a pm with instructions on how to make their order through Pay Pal. If you don't like Pay Pal well that is a problem. I need to check on the curent prices of materials to calculate the cost but it should be in the ranges of a plain cover about $35.00 9 letter top of the throttle $40 and 11 letters Right side of the throttle cover at about $45 do to the extra cost of material and test runs. Shipping will be with USPS first class air mail in and out side of the states out side of the States there is no insurance or tracking but it is the cheapest method of delivery . I have not lost one cover with this type of postage. I will check on current cost and post the rates here __________________ Edited August 10, 2012 by Deadman https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Stubbies2003 Posted August 10, 2012 Share Posted August 10, 2012 I blame Dastardly on this one. I'll take one with "Stubbies" as the callsign, no quotes obviously. Oh yeah and Dastardly's callsign needs a change. He knows what it REALLY needs to say. :) Link to comment Share on other sites More sharing options...
Dastardly Posted August 10, 2012 Share Posted August 10, 2012 :D Link to comment Share on other sites More sharing options...
geo111 Posted August 10, 2012 Share Posted August 10, 2012 I would like a set of Warthog covers. PayPal is not a problem. PM sent. Link to comment Share on other sites More sharing options...
Deadman Posted August 10, 2012 Author Share Posted August 10, 2012 (edited) Updated Three more now on confirmed list. Please subscribe to the thread for ordering instructions thanks Current interested listed members please confirm your intentions to order covers Markeebo Whisky One CONFIRMED Rockmonster2au CONFIRMED Church CONFIRMED Zlin CONFIRMED Falcon52 CONFIRMED Peyoteros CONFIRMED X3 Rhinox CONFIRMED Daryl1586 CONFIRMED BruceRobertson CONFIRMED y2kiah CONFIRMED JCook CONFIRMED Stano CONFIRMED cichlidfan CONFIRMED X2 Slayer CONFIRMED Runibl CONFIRMED 352nd Persecutor CONFIRMED Dastardly CONFIRMED Stubbies2003 CONFIRMED geo111 CONFIRMED Gangster CONFIRMED HawkMedic126 CONFIRMED 24 out of 25 CONFIRMED There are now 23 orders I will start private messaging instructions on how to order and pay shortly.I will leave ordering open over the week end so Let your friends know this will be the last run!!! Just post here if you want to order and I will contact you through the Private messaging on the form. Once there are 25 confirmed orders the member that have ordered will receive a pm with instructions on how to make their order through Pay Pal. If you don't like Pay Pal well that is a problem. I need to check on the current prices of materials to calculate the cost but it should be in the ranges of a plain cover about $35.00 9 letter top of the throttle $40 and 11 letters Right side of the throttle cover at about $45 do to the extra cost of material and test runs. Shipping will be with USPS first class air mail in and out side of the states out side of the States there is no insurance or tracking but it is the cheapest method of delivery . I have not lost one cover with this type of postage. I will check on current cost and post the rates here __________________ __________________ Edited August 10, 2012 by Deadman https://www.shapeways.com/shops/a-10c-warthog-supplies https://forum.dcs.world/topic/133818-deadmans-cockpit-base-plans/#comment-133824 CNCs and Laser engravers are great but they can't do squat with out a precise set of plans. Link to comment Share on other sites More sharing options...
Peyoteros Posted August 10, 2012 Share Posted August 10, 2012 Yo! Come on people, dust is an enemy of our equipment. This is not a cheapest HOTAS on the market, protect it. NOTE: you don't have to buy these covers every week, once you bought one, it should last you a lifetime, unless you have a dog, house on fire, tornado, tsunami, earthquake, flood, crazy wife, mad kids,... etc. So, quick thinking and order yours like NOW! P.S. this is not a request! "Eagle Dynamics" - simulating human madness since 1991 [sIGPIC][/sIGPIC] ۞ ۞ Link to comment Share on other sites More sharing options...
Recommended Posts