derelor Posted June 2, 2011 Posted June 2, 2011 (edited) Hi! This is a list of all typos/errors I found in the training missions that come with v1.1.0.8. I'd like to see them fixed in an upcoming patch. This makes my older post about v1.1.0.7 obsolete. UPDATE: ED has released an updated training mission pack for v1.1.0.8. I'll verify the missions again and update this list. Green font: Fixed in v1.1.0.8 updated TM Red font: Still not fixed in v1.1.0.8 updated TM 1. A-10C Familiarization 1.1 Introduction to the A-10C No errors found 2. Aircraft Operation 2.1 Aircraft Start-Up 1. As the engine spools up, scan the Engine Monitoring Instruments panel to watch the Engine Interstage Turbine (-> two spaces between the words, remove one) Temperature (ITT), ... 2. This (-> two spaces between the words, remove one) will set the flight route to appear on the TAD display. 3. ... and Targeting Enhancement (LASTE) panel of the left (-> two spaces between the words, remove one) console. 4. Taxing (-> Taxiing) out to the runway requires tower permission... (see here) 5. Startup Training mission needs to reflect changes in 1.1.0.8: - explanation for caution missing when left engine reaches 50% core fan RPM (see here for details) - switch from HARS to EGI Updated TM only: labels on, although they are turned off in options 2.2 Takeoff and Basic Handling No errors found 2.3 Navigation 1. In review, the selections of source navigation system on the top row and the type (-> of) navigation points on the bottom row determine ... 2.4 Landing (broken in v1.1.0.8, working again in update) 1. ... radio to the airfield's ATC frequency, (-> two spaces between the words, remove one) configuring the ILS receiver ... 2. ... then Batumi approach, and finally F1 to call Indound (-> inbound)... 3. We need to match the Batumi altimeter reading in teh cockpit (-> remove last three words) in the cockpit to ensure the altitude readings in the pit ... 4. You want (-> to) hit the approach fix at approximately 2,500 ft. 5. If both the donut and an arrow lights (-> light) are on, the speed is only slightly off ... 6. Press the Space Bar key to proced (-> proceed) when ready. 7. Once cleared, press the ESC key (-> two spaces between the words, remove one) to exit the radio menu. 8. The AOA Indexer is indicating your speed is (-> too) high for the approach. 9. When taxing (-> taxiing), avoid holding down the brakes while turning at the same time. 10. ... monitor the range and TTG to "home plate. (-> "home plate".) 3. Combat Employment 3.1 Digital Stores Management System (DSMS) (broken in v1.1.0.8, working again in update) 1. ... you can press the HOTAS DMS LEFT or RIGHT commands, or (-> two spaces between the words, remove one) DELETE and PAGE-DOWN on the keyboard 2. Outside of a malfunction that produces an error, your (-> you) should not have a need to access this page ... 3.2 AN/AAQ-28 LITENING-II 1. I've engaged the auotpilot (-> autopilot) to maintain altitude and heading. 2. OSB-5 (-> 6) toggles LSS mode. OSB-6 (-> 7) selects between Laser, IR Pointer and BOTH designation modes. Text corrected, but sound file also needs to be updated! 3. Press OSB-1 to enter the CTRL (-> CNTL) page ... 4. ... on the keyboard to select FLIR BHOT (black hot) video mode. ... on the keyboard to select white-hot mode. -> according to TGP display the modes are mixed up (or is TGP display wrong?) 3.3 GAU-8/A and Unguided Rockets (broken in v1.1.0.8, working again in update) 1. Press the HOTAS DMS RIGHT command or PAGE-DOWN on the keybaord (-> keyboard) to select the 4,000 ft. Gun Cross sight. 2. The CCIP Gun Reticle also features a numerical indication of the slant range to target in nautical miles (-> two spaces between the words, remove one) below the reticle. 3. Let's bring up CCIP mode to review (-> two spaces between the words, remove one) HUD indication used for unguided rockets. 4. Roll in on the (-> two spaces between the words, remove one) target and strike down upon it... 5. Switch to GUNS mode by pressing the HOTAS Master Mode Buttom (-> Button) ... 3.4 General Purpose Bombs 1. On the Profile Settings page, OSB-20 is used to select the Safe Escape Manuever (-> Maneuver) ... 2. You should set the SEM to either "CLM", "TRN" (turn) or "TLT"(turn level turn) (-> insert space between "TLT" and "(turn level turn")) prior to entering the combat area. 3. The PIBL (-> PBIL) is a theoretical prediction ... 4. Maintain heading for waypoint 2 ("MSN002") ... -> since default waypoint naming apparently changed in 1.1.0.8 WP2 is now called "MSN1" 5. ... that the Solution Cue runs down the PIBL (-> PBIL) and ... 3.5 Precision-Guided Munitions 1. In this lesson, we'll practice using the LITENIING (-> LITENING) ... 2. Range carats (-> carets) are indicated inside the reticle for Maximum and Minimum range. 3. When the range bar is between the Maximum and Minimum Range Carats (-> Carets) of the reticle, ... 3.6 AGM-65 Maverick 1. The DLZ consist (-> consists) of a collection of indicators ... 2. Make the Maverick SOI by pressing the HOTAS Coolie Switch (-> Hat) RIGHT (long) command ... 3. press the HOTAS China Hat AFT (short) command or the C (-> key) on the keyboard. 3.7 Air-to-Air 1. Set the TGP back to Wide FOV (WVOF) (-> WFOV) by pressing ... 2. Slew the TGP to the target and press the HOTAS TMS UP (short) command or LCTR (-> LCTRL) and ... 3.8 Countermeasures 1. - AIR: (-> two spaces between the words, remove one) defense against airborne target threats 2. Monitor the CSMC (-> CMSC) and RWR indications. 3. lesson.lua: name = 'Countermeasures(CMS)', -> name = 'Countermeasures (CMS)' (insert a space before the brackets) Three training missions do not work any more with 1.1.0.8 - but they all work with the training mission update: Landing: input of ILS-frequency (110.30 MHz) not recognized DSMS: manual selection of stations 4 and 8 not recognized GAU-8/A: you are told to set your steerpoint and fly to waypoint-3 ("MSN003"), but WP3 is called "MSN2". mission does not continue from there... Edited June 8, 2011 by derelor 1338 - beyond leet ED Forum rules EN|DE|RU
derelor Posted June 4, 2011 Author Posted June 4, 2011 Added two new typos in Air-to-air training mission 1338 - beyond leet ED Forum rules EN|DE|RU
derelor Posted June 4, 2011 Author Posted June 4, 2011 Added typos for CMS training mission. 1338 - beyond leet ED Forum rules EN|DE|RU
Fakum Posted June 4, 2011 Posted June 4, 2011 Thanks man,,, I got stuck in the DSMS Training, went in a few times to try and figure out what stupid thing I was doing,,, turns out its not me again,,, thanks for the help,,,, Windows 10 Pro - 64 Bit / ASUS ROG Strix B650E-F Gaming / AMD 7800X3D / G.Skill Trident Z5 NEO 64GB DDR5 6000 Ram / SSD M.2 SK hynix Platinum P41 2TB / MSI Gaming GeForce RTX 4090 SUPRIM Liquid X 24G / SteelSeries Arctis 7 Headset /LG-Ultragear 38" IPS LED Ultrawide HD Monitor (3840 x 1600) / Track IR4 / Thrustmaster TPR Pendular Rudder Pedals / Virpil HOTAS VPC Constellation ALPHA-R & VPC MongoosT-50CM3 Throttle
derelor Posted June 5, 2011 Author Posted June 5, 2011 Thanks man,,, I got stuck in the DSMS Training, went in a few times to try and figure out what stupid thing I was doing,,, turns out its not me again,,, thanks for the help,,,, Fixed in the training mission update 1338 - beyond leet ED Forum rules EN|DE|RU
Hanzales Posted June 6, 2011 Posted June 6, 2011 As a beginer I need to say Thanks a lot too! All work around from all of you do the introduction much easier for us who just started learn stuffs around. Keep up your great work. Very glad to be here! CPU: Intel Q9550 @2.83GHz | RAM: 4GB 1066MHz | GPU: Asus GTX 560 Ti | HDD: 1TB SataII | Keyb: Logitech G19 | Mouse: Logitech G9 | Knypl: Logitech G940 | OS: W7HE x64
EvilBivol-1 Posted June 6, 2011 Posted June 6, 2011 Thanks for the tests, derelor. However, flying in the release version of 1.1.0.8, I'm not able to confirm your results regarding labels in Start-Up and the playability of Guns and Rockets. Both work as intended on my end. Would be great if we had a few more players report their findings. - EB [sIGPIC][/sIGPIC] Nothing is easy. Everything takes much longer. The Parable of Jane's A-10 Forum Rules
derelor Posted June 7, 2011 Author Posted June 7, 2011 Thanks for the tests, derelor. However, flying in the release version of 1.1.0.8, I'm not able to confirm your results regarding labels in Start-Up and the playability of Guns and Rockets. Both work as intended on my end. Would be great if we had a few more players report their findings. I tried it several times and even reinstalled the training missions. I have labels turned off in the options menu, but they are shown in the startup training mission (only). 1338 - beyond leet ED Forum rules EN|DE|RU
derelor Posted June 7, 2011 Author Posted June 7, 2011 Guns and Rockets TM works fine, though. You are correct. My mistake was firing rockets first without deselecting the two weapon stations before. Deselecting the stations later will not be recognized then. 1338 - beyond leet ED Forum rules EN|DE|RU
EvilBivol-1 Posted June 7, 2011 Posted June 7, 2011 Could you try running the linked Start-up lesson? I made no changes except saving the mission again in hopes that it locks the options settings, which are loaded in the mission itself. https://rapidshare.com/files/1595193634/A-10C-Training-Start-Up.miz - EB [sIGPIC][/sIGPIC] Nothing is easy. Everything takes much longer. The Parable of Jane's A-10 Forum Rules
derelor Posted June 7, 2011 Author Posted June 7, 2011 Could you try running the linked Start-up lesson? I made no changes except saving the mission again in hopes that it locks the options settings, which are loaded in the mission itself. https://rapidshare.com/files/1595193634/A-10C-Training-Start-Up.miz Thanks! With this version the labels are now off again :-) I switched a few times between the two versions of the startup mission to verify the issue. Thanks for the great support! That's the reason why I bought A-10C twice. 1338 - beyond leet ED Forum rules EN|DE|RU
Winter Posted June 8, 2011 Posted June 8, 2011 Works for me too. thanks S!. A10-C twice? lol... I got LOMAC, FC, Black Shark, A10-C and now FC2 (because A10-C is so good). I'm a ww2 warbird pilot at heart but have been having too much fun in the A10-C. I expect to make a switch to jets as my main obsession. Thanks for the support guys.
derelor Posted June 8, 2011 Author Posted June 8, 2011 List updated to reflect all fixes in the updated training mission pack. Only few red entries remaining :-) Good work! 1338 - beyond leet ED Forum rules EN|DE|RU
kobac Posted June 9, 2011 Posted June 9, 2011 Are these updates we need to install? According to what I see that folders and files we just must to copy to appropriate install directory in the DCS A-10C. [sIGPIC][/sIGPIC]Everything is possible ...
159th_Viper Posted June 9, 2011 Posted June 9, 2011 Are these updates we need to install? According to what I see that folders and files we just must to copy to appropriate install directory in the DCS A-10C. Yes We've prepared updated versions of the training missions for the patched version 1.1.0.8. Besides fixing the broken missions, some minor improvements and adjustments were made to all training missions. You can download the complete new archive here: http://files.digitalcombatsimulator.com/en/59550/ Simply unpack the archive into your .../Training/en folder. You may want to back-up the original just in case. Hope these work well for you. Feedback welcome. Thanks, Novice or Veteran looking for an alternative MP career? Click me to commence your Journey of Pillage and Plunder! [sIGPIC][/sIGPIC] '....And when I get to Heaven, to St Peter I will tell.... One more Soldier reporting Sir, I've served my time in Hell......'
Barrakooda Posted June 10, 2011 Posted June 10, 2011 hmm labels showing up in ramp start mission with labels off in options
EvilBivol-1 Posted June 10, 2011 Posted June 10, 2011 Fixed higher up in this thread: http://forums.eagle.ru/showpost.php?p=1219998&postcount=10 Fixed version will also go into 1.1.0.9. - EB [sIGPIC][/sIGPIC] Nothing is easy. Everything takes much longer. The Parable of Jane's A-10 Forum Rules
Barrakooda Posted June 10, 2011 Posted June 10, 2011 Thx Evil that sorted it, was having issues with rapid & couldnt see the link.
Recommended Posts