reactorone Posted November 7, 2011 Share Posted November 7, 2011 (edited) Hi, I redesigned all panels of A10C, I leave to all manufacturers of cockpit. :) this is already a party, I'm working on more, I will update this post. available at this time: - Fuel Panel >> http://www.checksix-forums.com/attachment.php?attachmentid=26895&d=1320523186 - AN/ARC-164 UHF Radio Control Panel >> http://www.checksix-forums.com/attachment.php?attachmentid=26897&d=1320523253 - Auxiliary Lighting Control Panel >> http://www.checksix-forums.com/attachment.php?attachmentid=26910&d=1320599267 - Stability Augmentation System Panel >> http://www.checksix-forums.com/attachment.php?attachmentid=26911&d=1320602580 - Identify Friend or Foe Panel >> http://www.checksix-forums.com/attachment.php?attachmentid=26916&d=1320614502 Update 11/08/2011: - Emergency Flight Control Panel >> http://www.checksix-forums.com/attachment.php?attachmentid=26927&d=1320785437 Update 11/10/2011: - KY-58 Secure Voice Control Panel >> http://www.checksix-forums.com/attachment.php?attachmentid=26950&d=1320951942 Update 11/13/2011 - Armament HUD Control Panel (AHCP) >> http://www.checksix-forums.com/attachment.php?attachmentid=26965&d=1321188666 - Landing Gear and Flap Control Panel >> http://www.checksix-forums.com/attachment.php?attachmentid=26966&d=1321197606 Sorry for my bad English Regards, ReactorOne Edited November 13, 2011 by reactorone 1 Link to comment Share on other sites More sharing options...
agrasyuk Posted November 7, 2011 Share Posted November 7, 2011 thanks. that will come handy :) Anton. My pit build thread . Simple and cheap UFC project Link to comment Share on other sites More sharing options...
underhover Posted November 7, 2011 Share Posted November 7, 2011 WOW Thank you. Regards Pete Link to comment Share on other sites More sharing options...
reactorone Posted November 8, 2011 Author Share Posted November 8, 2011 Thanks a lot! This is the result of fuel for the AN/ARC-164 UHF Radio Control Panel: And hardware controls: :smilewink: Following soon ... Regards, ReactorOne Link to comment Share on other sites More sharing options...
Dropship Pilot Posted November 8, 2011 Share Posted November 8, 2011 You did this by hand? So .. ähhm .. woha! :surprise: Cheers, Stefan Link to comment Share on other sites More sharing options...
-Ice Posted November 8, 2011 Share Posted November 8, 2011 I'm sorry, how did you build these??? - Ice Link to comment Share on other sites More sharing options...
reactorone Posted November 8, 2011 Author Share Posted November 8, 2011 Hi, Updated with the "Emergency Flight Control" Panel, see my first thread for download the file. -Ice >> I'm sorry, how did you build these???Please look here, it's in French but the pictures will explain better than my English. Here: http://www.checksix-forums.com/showthread.php?t=145633 Regards, ReactorOne Link to comment Share on other sites More sharing options...
avlolga Posted November 9, 2011 Share Posted November 9, 2011 reactorone you r doing great work reactorone Link to comment Share on other sites More sharing options...
Necroscope Posted November 9, 2011 Share Posted November 9, 2011 Cool stuf. Thanx! Всех убью, один останусь! Link to comment Share on other sites More sharing options...
jvanes Posted November 9, 2011 Share Posted November 9, 2011 Awesome! ... That looks great! Man, i would love to spent some cash on such panels Keep it up [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
-Ice Posted November 9, 2011 Share Posted November 9, 2011 I see you printed them out, cut them, and glued stuff together. Can you tell me what material did you print them out on? Is that regular photo paper (glossy)? Also can you tell me what material did you glue them to? Thanks! - Ice Link to comment Share on other sites More sharing options...
reactorone Posted November 9, 2011 Author Share Posted November 9, 2011 I print it on a large professional printer (it's my job), then the print is laminated mat. The adhesive used was 3M Comply 40-10. The equipment used for the panels are PVC (Forex) 3mm and 2mm. Hoping you have been informed. Regards, ReactorOne Link to comment Share on other sites More sharing options...
-Ice Posted November 9, 2011 Share Posted November 9, 2011 Let me be sure I got this right: 1. You printed it on a large sheet, then laminated the cut-outs 2. You used 3M Comply 40-10 to glue it 3. You glued the cut-outs to a PVC (Forex) panel Is that correct? What is a PVC (Forex) panel? Any other name for it? Where do you buy it from (stationery store? hobby store? hardware store?)? Is that different from foam board? Thanks for your help! - Ice Link to comment Share on other sites More sharing options...
Swaty Posted November 9, 2011 Share Posted November 9, 2011 Just Excellent reactorone! [sIGPIC][/sIGPIC] My Pit Link to comment Share on other sites More sharing options...
Direwolf5 Posted November 10, 2011 Share Posted November 10, 2011 I believe that here in the states we call that Plexiglass, it is also referred to as cast acrylic. Check here http://rplastics.com/ Link to comment Share on other sites More sharing options...
reactorone Posted November 10, 2011 Author Share Posted November 10, 2011 Hi, Updated with the "KY-58 Secure Voice Control Panel" Panel, see my first thread for download the file. -Ice >> 1. You printed it on a large sheet, then laminated the cut-outs 2. You used 3M Comply 40-10 to glue it 3. You glued the cut-outs to a PVC (Forex) panel Not the forex is not plexiglass. I found this link in England for forex that I use is the same: http://www.thyssenkruppmaterials.co.uk/tgl/pvc-foam-forex-classic.html 1 - I print on 3M 40-10 Comply adhesive, and laminated mat that digital printing. 2 - I cut each printed file and I glue on the PVC. 3 - I cut each PVC in exactly the impression the panel. I would have to do a little tutorial ... but my English is very bad ... :( Regards, ReactorOne Link to comment Share on other sites More sharing options...
Swaty Posted November 10, 2011 Share Posted November 10, 2011 Reactorone, I have just try your idea. The materials are those I had already (not very suitable!) but the outcome is more than satisfiable (for me)! I spent less than two hours for this! Thank you again!! [sIGPIC][/sIGPIC] My Pit Link to comment Share on other sites More sharing options...
avlolga Posted November 10, 2011 Share Posted November 10, 2011 Ice, check this link- how . The PVC in film is not transparent. Link to comment Share on other sites More sharing options...
reactorone Posted November 11, 2011 Author Share Posted November 11, 2011 Reactorone, I have just try your idea. The materials are those I had already (not very suitable!) but the outcome is more than satisfiable (for me)! I spent less than two hours for this! Thank you again!! Beautiful! you used my file to make your panel? I hate to see more. :thumbup: Regards, ReactorOne Link to comment Share on other sites More sharing options...
Swaty Posted November 11, 2011 Share Posted November 11, 2011 Yes! Your file and the tutorial at C6! I would to ask if UHF Radio Control Panel is functional or a print? [sIGPIC][/sIGPIC] My Pit Link to comment Share on other sites More sharing options...
reactorone Posted November 11, 2011 Author Share Posted November 11, 2011 (edited) Hi Swaty, I'm glad you used my files. :thumbup: You should paint it matte black all white slices of your panel, even the holes or pass switches. It will make it much better. UHF radio control panel is functional, but only the knobs and switches associated with an electronic card of your choice (IOCards, XKEY etc. ...). The digital display is a digital printing, but you can put in place a display. Regards, ReactorOne Edited November 11, 2011 by reactorone Link to comment Share on other sites More sharing options...
Swaty Posted November 11, 2011 Share Posted November 11, 2011 Yes, I notice that after finish!lol Next panel will be better! This was a good test! [sIGPIC][/sIGPIC] My Pit Link to comment Share on other sites More sharing options...
reactorone Posted November 13, 2011 Author Share Posted November 13, 2011 Hi, Updated with the " Armament HUD Control (AHCP) " Panel, see my first thread for download the file. Cheers, R1 Link to comment Share on other sites More sharing options...
reactorone Posted November 13, 2011 Author Share Posted November 13, 2011 Updated with the " Landing Gear and Flap Control " Panel, see my first thread for download the file. Cheers, R1 Link to comment Share on other sites More sharing options...
Swaty Posted November 13, 2011 Share Posted November 13, 2011 Thank you! This will be my next! [sIGPIC][/sIGPIC] My Pit Link to comment Share on other sites More sharing options...
Recommended Posts