R.MES

Oui depuis la dernière mise à jour il y a 1 mois, de nombreuses touches ont été modifiées (train d'atterrissage, autopilote, portée radar, arrêt moteur, ...) et beaucoup d'autres ajoutées. Cf. ce post : Mais pas de miracle faudra que tu refasses toute ta conf à la main ...

Unfortunately not only for the gear up/down. See this post one month ago :

Thanks for this list ! I allow myself a copy / paste below, it'll be easier for everyone. By the way, unfortunately, the list mentions only the new bindings but not the modified bindings (see my first message) causing a reset in the keyboard / HOTAS shortcuts. On my side, it's OK, I think I found all what I need but I'm surprised to see no official RAZBAM post about that ... Added Axes ---------- Altimeter Calibration HUD Brightness Dashboard U.V. Lights Knob Dashboard Panel Lights Knob Red Flood Lights Knob Console Panel Lights Knob Caution/Advisory Lights Knob White Flood Lights Knob Light Brightnes Control/Test Refuel Lights Brightness Knob Backup ADI Pitch Adjust Knob Radar Gain Dial Target Wingspan Knob RWR Light Brightnes Control VOR/ILS Volume Knob TACAN Volume Knob MAGIC Tone Volume Knob TB APP Volume Knob Marker Signal Volume Knob UHF Radio Volume Knob V/UHF Radio Volume Knob HUD Brightness Dashboard U.V. Lights Knob Dashboard Panel Lights Knob Red Flood Lights Knob Console Panel Lights Knob Casution/Advisory Lights Knob White Flood Lights Knob Light Brightnes Control/Test Refuel Lights Brightness Knob Added binds ----------- Gun Trigger BRM Release Autopilot Standby Mode Inverted Backup Horizon FWD/FORCED, else MID/POWERED Backup Horizon AFT/OFF, else MID/POWERED Backup Horizon AFT/OFF Backup Horizon MID/POWERED Backup Horizon FWD/FORCED FBW RESET NVG Lights Filter ON else OFF FBW G-Limiter AA else CHARGES Master Arm ARMED Master Arm SAFE Backup ADI Uncage Lock Toggle Backup ADI Uncage Lock Pull Backup ADI Pitch Adjust CCW Backup ADI Pitch Adjust CW RADAR POWER CCW RADAR POWER CW HSI VAD - HSI VAD + HSI Mode CCW HSI Mode CW HSI VAD STEP - HSI VAD STEP + BINGO Fuel 1000kg Inc BINGO Fuel 1000kg Dec BINGO Fuel 100kg Inc BINGO Fuel 100kg Dec BINGO Fuel Combo Inc BINGO Fuel Combo Dec Selected Alt FL 100 Inc Selected Alt FL 100 Dec Selected Alt FL 10 Inc Selected Alt FL 10 Dec Selected Alt FL 1 Inc Selected Alt FL 1 Dec Selected Alt Combo FL+10 Selected Alt Combo FL-10 PCN Parameter Selector CCW PCN Parameter Selector CW INS Mode CCW INS Mode CW INS PCN Operational Mode CCW INS PCN Operational Mode CW UHF MODE AR UHF MODE M UHF MODE F1 UHF MODE H UHF MODE Rotate CCW UHF MODE Rotate CW UHF Channel Knob Dec UHF Channel Knob Inc V/UHF MODE OFF V/UHF MODE FF V/UHF MODE HQ V/UHF MODE SV V/UHF MODE DL V/UHF MODE G V/UHF MODE EN V/UHF MODE Rotate CCW V/UHF MODE Rotate CW V/UHF Channel Knob Dec V/UHF Channel Knob Inc V/UHF MEM/CLR V/UHF VLD/XFR V/UHF 1/READ V/UHF 2/SQL V/UHF 3/GR V/UHF 4 V/UHF 5/20/LOW V/UHF 6/TONE V/UHF 7 V/UHF 8/TOD V/UHF 9/ZERO V/UHF 0 V/UHF CONF TACAN CH 1- TACAN CH 1+ TACAN CH 10- TACAN CH 10+ TACAN CH Decrease TACAN CH Increase TACAN CH XY Switch TACAN CH X TACAN CH Y TACAN Mode OFF TACAN Mode REC TACAN Mode TR TACAN Mode AA TACAN Mode Next TACAN Mode Prev TACAN Mode Cycle VOR/ILS Volume Dec VOR/ILS Volume Inc TACAN Volume Dec TACAN Volume Inc MISSILE Volume Dec MISSILE Volume Inc INTERCOM/APPROACH Volume Dec INTERCOM/APPROACH Volume Inc TP/MARKER Volume Dec TP/MARKER Volume Inc UHF RED Volume Dec UHF RED Volume Inc V/UHF GREEN Volume Dec V/UHF GREEN Volume Inc

In this thread : https://forums.eagle.ru/topic/182674-dcs-world-25-changelog-and-updates-of-stable-version/page/2/ Extract : "DCS M-2000C by RAZBAM Simulations Added: New keyboard bindings. See forum entry for complete list. Added: New axes. See forum entry for complete list." I have surely missed something but ... where is this list ? This morning after the DCS update I had the bad surprise to find plenty of broken previous bindings (autopilot on/off, gear up/down, radar range +/-, interior light, engine stop, etc.) ...

Hi VonWerner and thanks for your feedback. I'll change the description to put the liveries into "Saved Games\DCS\Liveries" instead "Saved Games\DCS\Mods\aircraft\Liveries Import\" if it works better.

Hi ! After some investigations, I'm confused ... On my PC, for this skin : - The folder name is "Iraqi Air Force" (the default name when you unzip this livery) - In the "description.lua" file, the last line is name = "Iraqi Mirage" - In the DCS Mission Editor, in the liveries list, the name is "Iraqi Mirage" - when I unzip the .miz files and open the "mission" file (with notepad for example), the livery_id = "iraqi air force" (why ?!?) But in any case, on my PC, it works ! So ... I don't understand the difference with your config and why it's not working for you ... You are at least two in this case ... What about the other players ? So far I don't know what to do ... I'll ask in the "Mission Editor Discussion and Questions" forum maybe but if someone here has an idea ... R.MES

"Blood and Sand : A Mirage Story" is a fictional 5 mission campaign for the Mirage 2000C, fully voiced-over, taking place during Iran–Iraq War. Briefing doc and kneeboard available for each mission. Situation : November 1987. The war has been lasting for more than 7 years. In the sky, Iranian F-14s have no challenger. Despite daring and often successful air fights, the Iraqi Mirages F1EQ can't contest the Tomcat's superiority and must also carry out ground and antiship strikes. But there is good news for Iraq : The two first Mirages 2000 are just coming from France. Link https://www.digitalcombatsimulator.com/en/files/3314265/ Hi everyone ! Here is a new campaign for the Mirage 2000 on the Persian Gulf map. Feel free to comment, ask, report, ... R.MES

Unfortunately, you are far from reality. Mirage 2000-5 can't carry the Meteor. So far only Rafale, Eurofighter, and Gripen can do that (F-35 in project). As far as we know, there is no project to add it on the Mirage 2000 whatever the version or the operator. So honestly, absolutly no chance to see the Meteor on the Razbam Mirage 2000C ...

Hi everyone, I have the same question and for one years there is no answer on this thread ... ...

Campaign completed ! Really thrilling. I'm sure it made me a better F18 pilot. Happy to read you are working on a new campaign, I will keep an eye on it ...

Hi Glyn, First, thank you for this campaign. After the free to play one, I was looking forward playing the sequel. So far (mission 5) I am not disappointed. It's excellent and I really enjoy playing "Ford" again. By the way, I have some remarks : 1- (not specific to this mission) Waypoints of the flight are not showed on the F10 map. I suppose it's the problem described HERE . But in some others missions / campaigns (see the thread), waypoints appear. Do you know why ? 2- I spend several minutes in the official manual to find how to switch to the right "precise" format. The briefing doc says "HSI -> Data -> Act" but it's rather "HSI -> Data -> A/C -> LATLN ..." 3- It's a unimportant detail but Stennis control suggest a CASE I approach despite the bad weather ... I was a bit surprised as I expected a Case II (but no problem to land and the lights on the deck were on)

Any news ? If it's not a bug; could an ED official explain if it is a option in the mission editor (and where) ?

2- Don't see any "black dot labels" in this mission or the 2nd Red Flag mission I played too (by the way great mission also !) 4- You're right, I was slightly on the right of the runway before the left break

Congratulations Sedlo for this strongly built and really interesting mission. I can hardly imagine the amount of work it takes. I played it several times. Overall it works pretty well but I have some comments : 1- The behavior of our wingman is totally insane. I know it's a common DCS problem and not specific to this mission but it's amazing. How is it possible to have so smart AI ... except when the AI is your wingman ? He does anything except what would be useful and finally he reaches bingo fuel and ejects despite 3 tanks and the AAR ?!? Unbelievable ... 2- Labels are disable even after editing the mission and checking the option. I can understand it's less realistic but in real life I don't have a 1920x1080 pixel vision. 3- I suspect some troubles with the AAR F10 option. As I said, I played the mission several times and it seems that if you send your wingman to the tanker or contact it after the question "Would you refuel ... or not ..." but before the message at 10 miles from the tanker, either you have nothing (no F10 message, no F10 option in the menu) or you have the F10 message and the F10 option but very late after refueling. In all cases, if you switch to channel 16 you can follow the mission normally and have the appropriate messages starting at 8h42. 4- I'm a bit confused concerning the landing. The tower requests a left-hand break. For me it's a left turn (to keep the runway in sight on my left) similar to the carrier CASE I. I did that and ... I had a message explaining I've done a right-hand break ... I probably misunderstood something ... 5- Finally I have a question : since the last stable DCS version, in most missions, our own waypoints no longer appear on the F10 map but it's not the case in this mission. Do you know why ? Thanks again for this mission.

Is it a joke ? I'm puzzled ... Because this "bug" doesn't concern all the missions. For instance, in these following missions, we can see our own waypoints : https://www.digitalcombatsimulator.com/fr/files/3312190/ https://www.digitalcombatsimulator.com/fr/files/3312980/ https://www.digitalcombatsimulator.com/fr/files/3312092/ So what's the difference / the option to show or hide the waypoint of the player ???

No news about this bug ?

No problem. I have the Hornet module. I'll try with it.

Too bad :( ... I wanted to try ... Thank you for your quick answer !

It seems this mission is no longer available in the "User files" part ... Is it normal ?

I have the same problem too. But it depends on the mission. For example, with this mission : https://www.digitalcombatsimulator.com/fr/files/3312092/ I can see my waypoints each time I play. I opened it with the mission editor but I see no difference with others missions. No idea ?

I just achieved this campaign. It was great ! :thumbup: A long, intense and really immersive one. I enjoyed all the radio chitchats with the authentic anecdotes about Red Flag as well as the various kind of missions (day, night, escort, interception, bombing, ...) and the scriptwriting effort from start to finish (literally). At the end of mission 16 (during the credits) I realized the voice actors work and the number of people involved. Unfortunatly and as mentionned by others above, I'm a bit irritated by the AI being out of control ... especially when they are your ally. I can't count the times where my allies don't do what they have to do ... Baltic Dragon, I know you are very busy with Raven One and AV-8B but I hope a SoH campaign of the same quality and lentgh ... some day ...

In the ME, select your plane then clic on the tab "..." (just on the right of the radio settings tab) then select "Mount the DDM sensors" option.

It's normal. To use the DDM, you have first to ... mount it on the plane ! On the M2000, the DDM is optional, located (or not) at the rear of the Magic pylons. You can do that in the mission editor. If it's not set in the mission you are playing ... the DDM light in the cockpit goes blinking.

(waiting for the today DCS update ...) No matter the order, all these projects sound good ! For Raven One, I didn't know but I started to read the novel. For the Harrier, I have a special affection because my very first "simulator" was "Jump Jet" in 1985 on Amstrad CPC (click on the jacket below and look carefully at the screenshots !). Since that, I'm totally fond of the Harrier !

I had the same problem one month ago : Edit this mission 1, show "hidden objets" to see the Humvee on the map in front of the IP's M2000 and delete it.