Tomcat388th

No change for me also slow repair and deleting fxo and shaders but its still playable for so at least thats a plus

amd 5800x3d 64gb 3600 ram 3060 12gb gpu. HP G2 ver 1. In the main menu screen with the fps counter on it shows CPU bound. I have a simple refuel mission f18 fps counter shows cpu bound render thread and cpu main. As for any gains i might of improved 5 fps with my G2. If I swap over to my quest2 it has lost fps and has a bad stutter. In a level turn about every 4 seconds you can see it hesitate. I know my 3060 will be my bottleneck but I'm surprised with the cpu message. dcs.log

Here are my settings but mycpu is a 5800x3d and my ram 3600 the rest is the same as yours and I do run airlink. I will only note what settings I have different from your screen shots Quest2 90 Hz4128x2096 nvida cnt pnl anisotropic filtering Application-controled antialaising mode Enhance the application antialaisning setting 2X DSR factor OFF MFAA OFF Shader cache 10GB Texture Filt Negative lod Clamp Texture Filt Quality VR pre rendered frame 3 Ocululus tool tray Game settings tab Default Super Samp 0 Adaptive gpu scaling on Link Tab Distortion curve high Encode res 3960 Encode bit rate 0 Sharpening enabled Dcs Res of cockpit display 1024 Anisotropic filt 16x SSA 1.5 Pixel Den 1.0 I'm also using the openxr toolkit using FSR upscaling with 90% size and 40% sharpness These setting are pretty well giving me a solid 45fps whether I'm in SP or MP even on 4YA's Syria server. This is using the oculus runtime and the force open xr shortcut for DCS. J

yes just MP SP ok

I have been fighting this for awhile resetting the toolkit helped me for a bit but it started to hang up again in MP hit the fly button and that is as far as i would get. The final fix for me was a slow repair again with removing any extra files box checked.. I backed up my dcs saved games folder and moved it to another folder then deleted the original so DCS could build a new one. For me I believe it vaicom and voice attack getting corrupted with something in my save games folder. I loaded everything back up and I could repeat my problem. Now I'm just running voice attack along with srs and the open xr toolkit. Everything is running really nice now. All my troubles started after this last update I rarely had a problem unless it was self-induced.

yes shutdown before any dcs updates and started before opening dcs to play

That makes sense thank you J

As much as i loved vaicom and voice attack I ended up uninstalling both and just reinstalled voice attack. I would get 3 or 4 good missions then something would get corrupted and start hanging up me loading into multiplayer. If a repair didnt fix it i had to have dcs make a new saved games folder Before this last dcs patch I had 0 issues. I fly the 18 in vr J

No sure where to post this if it need moved no problem. Here latley in MP missions with HMD circle showing my wingman. It will be centered up on them to start with then start drifting away then snap back. Last night I was rejoining on my flight lead, he was right in front of the left canopy bow his circle would drift all the way back to the edge of hud then snap back to him then repeat. No problems with the alignment J

Thanks this sounds like a good option. I also found your post on how to set it up with viacom. Got it mapped to open it up and close. Thanks again J

I know vaicom has this and open kneeboard also.Vaicom breaks IC and open kneeboard is hit or miss for me locks up DCS in MP with VR. When it did work it was nice for Bullseye calls and case 3 info. Thank J

I went from a stock 1080 to a 3060 with my older computer which was a dell workstation xeon3.2 gb and 32gb ram. That rig got me in mid 30's-low 40's fps Single player and MP 30-40's . Med dcs settings. I just recently upgraded my motherboard cpu and ram. AMD 5800X3D,asus b550 prime plus MB, ddr4 3600ram. Now in SP I'm low 40-50's MP it hovers right around 40's. Plus I was ablet to bump up some of the dcs settings still experimenting with that to find the happy medium. This is with a reverb g2 ver1 and using openxr toolkit for tweaking J

I believe I'm fixed after 2 slow repairs with deleting the extra files and a new saved games reload things seem to be working. When it would hang up my SRS radio tab would change from the startup freqs to unknown. Now it changes to the radio set of which ever jet I enter. So I don't know if it was a SRS or DCS that was losing track of things. So fingers crossed for tonights squad mission. Thanks for the input and help J yep update on that and got everything going now thank you

Thank you Edmuss even though I have read this forum a few times trying figuring out my problem I was somehow still getting it backwards.

I have a support ticket started but so far no change have renamed saved games and let dcs reload still the same. Heres latest dcs log dcs.log

The problem started after the openxr update and hotfix had zero problems with MP servers before that. Even our squadron servers are hanging up on me. Getting ready to break out my Quest2 and try it with their runtime and see if it will work or not. No red shield or IC fail. I can enter the sever pick my slot then the briefing screen click fly. Then it hangs on what ever the scenery happens to be at the time

I need some help here when ever I try to go to a mp server when I get to the fly button and click it DCS hangs up with just a desert scene no crash log or anything. I have done a fast repair& slow. tried the different shortcuts. deleted open composit reinstalled it . This last patch and hotfix has tanked my DCS. I have motion reprojection off in open xr and the toolkit(latest version}. My system amd x5800x3d 32gig ram ssd's 3060 and hp reverb g2 ver1. Works fine for SP J

For some reason everytime I close the dcs updater utility the user config file gets corrupted. I'm using it to start vr with the steam vr api render driver for my quest 2 and messing around with the openxr toolkit settings. Is there a command line for this to where I can just make a dcs shortcut and or is there a fix for the udater utility Thanks J

I ran 80hz with max res with my quest2 . Ran across taticalpascal.s you tube vid on his quest 2 setttings. Which is what I copied to try out. For me I found it to be much smoother than having the fps unlocked. with it unlocked I got around 45-50 fps and if you pulled up dcs fps counter it was just a mass of large high and low spikes on the fps and frametime. With the fps locked to 30 the fps is a flat straight line and the frametime is just a small squiggle. My bottle neck for me is my computer being thats its so old and ram speed. take care J

I have both headsets also my G2 is version 1. With the quest 2 and my computer setup I run it at 80hz 1.0 then used the oculas tray tool to lock the fps to 30. Dcs middle of the road settings and on the vr page 1.6 pixel. Cockpit (F18) clear and sharp runs really smooth even in MP. My G2 I have tinkered a lot with it using the open xr tools and openxr toolkit but my latest experiment and settings as goofy as this sounds Open XR tools custom render scale 200 motion repro disabled. I have the openxrtool kit disabled. Dcs settings the same but VR pixel set to .5 As of right now I am really pleased with these setting. I prefer the g2 just for its quick launch. And I dont get to hung up on fps if it running smooth and I can see I'm good J

One thing that helped me was to move the windows task bar to the left or right side. With it at the bottom I was constantly getting outside the window trying to flip switches on the side consoles.

I have yet to get the toolkit to come up with my quest2 . Open xr tools for windows is showing the correct runtime WMR runtime or whatever it called. Skatezilla is showing the right options as the screenshot above a few post. openxr toolkit has a ck mark for opencomposite_dcs. I have ctrl and the arrow keys mapped for changing options And the opencomposite runtime switcher Status shows opencomposite I got it going I set the runtime back to Oculus

Scroll down to my post openxr tools for windows I had the same problem. You have to delete a registry entry and that fixed it

I'll check with fred Thank you again J

Thank you that fixed it for me. When you stated that I had a API layer installed outside of my programs folder. I had open kneeboard installed on a different drive. If I install it in c:\programfiles should everything work or does open kneeboard mess up the opxr registry again. Thanks again J