Jump to content

algerad3

Members
  • Posts

    522
  • Joined

  • Last visited

Everything posted by algerad3

  1. Question: in the export .lua did the functions "LoSetSharedTexture(name)" ,"LoRemoveSharedTexture(name)"and "LoUpdateSharedTexture(name)" stop working or get deprecated? With the new engine I tried to get it working and no such luck.... Maybe I am doing something wrong.
  2. on mine, I just adjust it a little. It seems it tweeks out at a certain point. Others have had problems throughout the whole zone. Same with the rotaries. At one small point the jitters arrive just a little past that point they go away.
  3. Drivers are required if I remember correctly. Have mine for many years and even got the mfd to display info for some modules. Love it, I still use the throttle for the mfd in conjunction with my x-65f.
  4. WTF ??????? I saw this thread and wanted to put in my two cents. Went to look up the price as I knew that the Saitek Rudder pedals I got were $90.00. Now I see the going rate is $400.00 New ? That is crazy. http://www.amazon.com/gp/product/B000H67DDY?psc=1&redirect=true&ref_=od_aui_detailpages00 Wha hoppen? Anyways , I have had these pedals for at least 7 years and I love them. Just the right spacing, smooth action, toe brakes etc. No issues. Matter of fact I had two sets, one for home and the other for the boat. Both were good to and for me.
  5. Mad dog , I have same card, it is dx11. Just not as strong as one would expect. Research(post purchase) showed it was similiar to the 4880 in performance. Just less energy use and dx 11. I also responded to your other post in the video section.
  6. I have two 5770's x fired ( took them out). When 1.5 rolled out I was in the same boat. With xfire I did see some gains (about 10-15). I have 16gb mem, I7-930 proc. I decided to upgrade and got two r9-270 (best buy model) and saw mass improvements. In 1.5 flying the ka-50 in the "Clear Tchavili" mission I was seeing 35-40 fps at mission start and pretty much hovered in that range throughout. (x-fire) I am now seeing 100+ fps in dcs 2.0. (settings high with medium traffic). With the new drivers ( which offer no improvement for the 5770 iirc) my frames have improved even more. So, in short newer vid card will/should do wonders for you. Hope this helps.
  7. Question: in the export .lua did the functions "LoSetSharedTexture(name)" ,"LoRemoveSharedTexture(name)"and "LoUpdateSharedTexture(name)" stop working or get deprecated? With the new engine I tried to get it working and no such luck.... Maybe I am doing something wrong.
  8. Normal event. Civ Traffic eats up fps.
  9. please explain with more info. I have throttle quad and will look into this with more info given.
  10. Whargod, Take a look at this: http://forums.eagle.ru/showpost.php?p=2485884&postcount=343 If you peruse the scripts you should be able to get the real time data with a lua script and display on lua console. ANy questions , let me know.
  11. 650w Seems a little low for later upgrades. I run a Core 1-7 930 and have two r9 270's all powered by an corsair 850w ps. All your other parts look good. Think ahead on the psu and when you need to add to the system you will have the power to run it.
  12. Sweet, I knew we would get it figured out. After looking at your signature, Am I getting my hopes up too high? Are you jumping in on this project?
  13. I found the problem, The new drivers for the fip are borked. I had that problem before with another driver build. I removed my current drivers and installed the new drivers and have the same issues. Even the X-52 pro is affected. I also tested the newer version of luafor windows and that works without issues with My good fip drivers, so you are o.k there. Remove your current drivers and Use these drivers and please report back. Saitek_Pro_Flight_Instrument_Panel_7_0_34_109_64_Full_pfw.zip
  14. try this. Maybe , I have given the impression all you have to do is click "Saitek lua , I wrote that while working on the CPIAS.luac script. Try the Cpias script(remove Saiek lua and use CPIAS.lua). double click Cpias.luac and let me know if you get a lua console box on your primary display screen and the picture on the fip. If so, then Cpias will wait for you to start a mission and then inform you when the mission starts to select a gauge ( big bold yellow letters on Fip.) CPIAS.zip
  15. CHSubZero, Let us work our way slowly through this: When you start saitekstart.lua do you see a screen on the fip like the one in my sig?
  16. Give me a minute to think it through and I will help you get it sorted.
  17. Boedha, I just went through that routine with Black shark 2 upgrade. Sine I had removed BS1, I had to reinstall. Run it and then good to go. It did not ask for activation code for BS1. Went to module manager and then installed BS2 without issues.
  18. I thought I had the F86f and Mig 21 ready to go. After double checking I found some errors/issues so soon. The other module; MI8 is work in progress. While the X52 has been a bit neglected(in some planes not really useful) I am looking at what can be incorporated . ( I need to get stick time and learn some of this stuff in the aircraft). That having been said, The last offering for now: the Mig 15. (no x52 functions, again) The radar altimeter is acting funky when you turn it off. When it is on, it works as advertised. Happy flights, I will be devoting time to other endeavors for a bit. :pilotfly: CPIAS MIG15.zip
  19. IS it Christmas Time?????? FW109. X 52 pro : As above ( sorry) Fip: 1 info 2 S1-S2 indicates chosen fuel source, right dial selects fuel source. S5,S6 low fuel lights. 3 info 4 Right dial O2 on /off 5 Left dial pressure set 6 info 7 right dial course set. 8 clock functions 9 info 10 info 11 info 12 info 13 info Install as above. CPIAS Fw190.zip
  20. Some More?????? BF109. X-52 inoperable. Dash is easier to read than the mfd. No real useful functions. FIP:1-4 info only. 5 S1 and S2 on/off select. (another module I have not had stick time with so I was unable to test due to not knowing how to operate) 6 Info 7 Right dial O2 open/close 8 info 9 info 10 Left dial set pressure. 11 Right dial set course. 12 info 13 Clock , knobs and dials marked works as in sim. Install as above. CPIAS BF109.zip
  21. Again ????????? Double whammy here. P51 and T51.(yea, I know) Fip functions pages 1 thru 10 info only 11- reset button marked , functional (press for about 11/2 seconds) 12,13 info only 14 left knob pressure set. 15 course knob marked and working 16 info 17 button start and stop, left knob adjust. X-52 info only ( scrolls) install as above. only one gauge set as they are the same gauges. CPIAS P51 And T51.zip
  22. more !!!!!!! Huey gauges inbound.... saitekuh1h.lua goes into "User\Saved Games\DCS\Scripts"folder. Directoutput huey.lua goes into folder with Directoutput.lua's and CPIAS . Insert Huey gauges into " C:\Program Files\Saitek\DirectOutput" folder. 1 turbine info cluster. S6 test fuel gauge. 2 info only 3 info only 4 knob function is as labeled (see below) 5 info only 6 left knob pressure set 7 knobs as labeled, s1,s2,s5,s6 function select. Active function lit. 8 info 9 info 10 knob as labeled 11 info 12 info X-52 functions All pages radios. Press right wheel to change control options. Active options appear on line three. I have not had a lot of stick time therefore I do not know all of the systems. The rmi is one that I did no test fully,I guessed on the Gs and loc lights. Let me know if not correct. CPIAS HUEY.zip
  23. INCOMING!!!!!!!!!!! For refreshers, here is the install instructions; http://forums.eagle.ru/showpost.php?p=2385283&postcount=336,http://forums.eagle.ru/showpost.php?p=2385297&postcount=337. Now that is out of the way: There is a new export.lua script had to fix some things. A new CPIAS.luac. (FORMERLY saitek.lua) Double click to start script. And Ka 50 gauge set. The gauges and x52 functions and such are the same as before. Fip pages functions: 1 fuel gauge, S1 to test gauges. 2 Apu operations. S6 to select item to start(selected item lights up) S2,S3,S4 starts labeled item. S5 stops apu. 3 Turbine egt. S1 operating test. S2 stopped test. 4 info only 5 info only 6 Abris functions. functions as labeled 7 info only 8 info only 9 hsi (needs work on the dta digital readout. Knobs for labeled functions. S6 to test. lit buttons indicate mode. press unlit to change mode. 10 radar alt. Right knob to adjust safe alt, s6 to test. a little behind after 150 meters. 11 baro alt left knob adjust pressure setting. 12 info only 13 info only 14 wip. (still, my artistic abilities still looking for me.) X-52 pro functions: 1 info only 2 info only 3 info only 4 info only 5 info only 6 radio (r-800 only functions) PRESS right scroll wheel down to change dial control, SCROLL UP or DOWN to change freq values (will figure out and add other radio later) Lights at base of joystick = landing gear status. Export.lua and saitek.lua goes into "User\Saved Games\DCS\Scripts"folder. Directoutput ka50.lua and CPIAS goes into folder with Directoutputa10c. Insert KA 50 gauges into " C:\Program Files\Saitek\DirectOutput" folde CPIAS KA50.zip
  24. I am looking to create a gauge set and readout for Saitek FIP and X52pro. Normally I can find the info needed in "Mainpanel.lua" but I can not find such info for data export anywhere. Am I missing something?
  25. Well back to the land of the living for a short time. Working on A-10,Bf109,F86F,Fw109,Ka50,MIg15,P51,Mig21. The Huey gauge set and MIl28 needs a lot of love. (Making pilot/copilot set) in anticipation of dual cockpit setups. Also have a few new modules to work on , but only after I get those listed above out. Hope you have not thrown out your Saitek gear.
×
×
  • Create New...