TCKnight

Finished. Beautiful. Technical and accurate. Best I've flown to date on DCS. First in, last out.

You can control the size of your paging file. After this, check your RAM settings.

Sorry, but the CBU 105s also work with GPS and ins... in particular the 105s have the WCMD... Wind trim corrector. It is also present in the bomb configuration on the MFD. A wind correction is already set on DCS. I'll leave you a wiki page. https://en.wikipedia.org/wiki/Wind_Corrected_Munitions_Dispenser That said, maybe the 105s aren't the best weapons for this mission? If the wind actually affects its performance too much, isn't it better to use other weapons?. N.B. It's not a polemical post, but it's just to have maximum realism. Also in the Mission Briefing... "Popeye had a weather briefing prepared for us. During the evening the winds have begun to pickup, which has had the benefit of helping clear the majority of the clouds out" ok...i find the solution... The problem is the bombs attached to the paracute after the cluster was opened. Setting a BA 1000, the wind is too strong and moves the charges. I set the BA to 400...target hit.

Stupendo, non vi conoscevo come gruppo. Complimenti.

Here we go again. So mission 9 part 2 is over.Score 100, but with Saint m61. I have a problem with the cbu105. Try with tgp, pre mode, vis mode, they always go off target by a few miles. I thought it was a wind problem, which on missions is also 28 knots, but they are GPS... I have tried other missions in DCS with these weapons and they always hit the target. Is this a part 2 sync issue?? This involves using jdam alone. I noticed that even the targets in ag when engaged with the cannon only moved slightly. I had to end the mission with the cannon. I sweated ahhahaha sorry for the screen orientation...vr....ahahah

"You are number one ...to land, check gear down" cit. Thanks

"*** NOTES TO PLAYER *** This mission will take place in two parts" Hello, first of all congratulations on the campaign. Beautiful. The person writing to you is an old simulator pilot (I'm 42 years old) who spent years on Falcon 4.0. Actually my first sim was f/a18 interceptor on amiga 600 :). I have created many theaters for bms, including "Operation Adriatic Sea". I understand how difficult it can be to please everyone. Now I only use DCS for VR, clearly superior. I flew mission 8 like I hadn't done in a long time.... I finished a shorad threat with the guns.... All excited I read the briefing for the new mix and I got stuck at the end.... in the part I written at the beginning. Why not do a single mission?. I'm used to long flights with the F14, I'm not scared of refueling in flight with the F16. If so, is it possible to enable a unique mix with anyone who wants to try?. Thank you and I look forward to more of your work. By ...Sword 1 -1 out

After the last update DCS only started in 2D. I checked the latest installed applications and there were new drivers for Leap v5.17.1 that works in openxr. I removed the latest drivers and restored the old ones. Everything is working again. Dcs Mt + force VR string. Reverb g2, latest nvidia drivers for 4080FE.

please fix this big bug. I fly with vr... big square everywhere

Hellooooo... I try the first missione...i love I buy, but... i have a big problem. First mission, ramp start ok..but press f10 for the map, dcs go in crash. I play DCS in VR.

I had the same problems with complex missions and ram. I use Liberation a lot. I bought a 3090 24gb, an m2 980 pro where I installed dcs and a virtual memory on a 60gb ssd 850 pro. Flight in VR without problems even for two hours. But this cannot be normal ... DCS also occupies 90 GB of memory during missions

Please give me change dx use … thanks

Same problem here. I have same config, 3600 , ddr4 32gb 3600, nmve for dcs e 3070 @ 8ghz ram e 2030 Vcore. I fly with reverb g2…ss 100% e pd 1.3. All settings high and msAa x2… I have good fps, anche good refresh rate. I can fly only one mission… but I’m a old falcon 4.0 pilot, and restart the sim after mission. Your gfx settings ? Ps I have 35/45 fps… but change for mission and theater.

Salve ragazzi, dopo l’ultimo update ho questo problema . In pratica manca la texture del visore.

After target update [emoji3590]

potete trovarla sul sito bms. https://youtu.be/O3G2v6Zr2-g

DOPPIO POST SCUSATE

ahahaha ...Falcon insegnaa!! hahahaah

ahaha Mago vedo che gli anni passano ma ci sono sempre questi problemi. Giustamente il mondo è bello perchè vario. Comunque new per l'f18 di dcs?=?

Grazie a tutti per i complimenti. Tigre, l'ho postato anche qui, visto che utilizzo attivamente sia a10 dcs che fc3. Credo che tra noi simmers, qualche novità faccia sempre piacere. Ovviamente non c'è nessun fine di lucro, ma semplicemente una passione da condividere. Ciao Mago!! bentrovato:)

Ragazzi volevo segnalarvi che io e un mio amico abbiamo e stiamo finendo di sviluppare un nuovo teatro per falcon 4 bms upd7. Le cose da dire sono tante, ma partendo per ordine trattasi di una rivisitazione completa dei Balcani. Il teatro, infatti si chiamerà Operazione mare Adriatico. Troverete una intelligenza artificiale della campagna rivista, nuovi script per i file TRI, f104 asa con nuovo modello 3d, piste aeroporti in hd, texture terreno in hd, molti oggetti 3d rimodellati e inseriti, pak campagna rivisto, interfaccia utente rivista, e tanto altro. Per adesso siamo in beta. per chi volesse questa è la pagina ufficiale del progetto. Vi lascio alle immagini del teatro che valgono molto di più delle mie parole. https://www.facebook.com/operationadriaticsea1 RILASCIATA LA BETA 0.9 per il link visitate la pagina FB del progetto. Grazie :joystick:

i lost my old logbook!

Kuky, thanks for your reply. I tried with both the a10 sp mp that always having the same problem. I found another difference between mp and sp. The connection to the multy player is this: "C:\Program Files\Eagle Dynamics\DCS World\bin\DCS.exe" --net-mode gui this is the one on the sp "C:\Program Files\Eagle Dynamics\DCS World\bin\DCS_updater.exe" It could be one of these additional strings? OK LAST UPDATE! partly solved... to make it work: 1 Launch Dcsworld 2 entries mission editor and enter a plane piloted any 3 Press on the fly 4 finally the 2nd monitor is ok. 5 Now go back to the main menu and you can use any plane without problems. I remain of the opinion that something has changed in the executable ... for me this is a bug.

Thanks for your reply Dredd.. this configuration Always work, since 2012 :joystick: I try 2405. I have same problem...i don't understand why only single player freeze frame.

Ragazzi io da quando ho installato la 1.2.5 non ho più il supporto regolare del 2o monitor per gli mfd. Ho ricontrollato tutto, eppure non c'è nulla che risolva il problema. Sul forum dcs world mi è stato risposto che non è stato cambiato nulla per i multy monitor, eppure installando la 1.2.2 ritorna a funzionare tutto come prima. In partilcolare se lancio l'eseguibile del dcs world multy player funziona tutto...con il single player il 2o monitor si blocca. Ho fatto dei video.. Single player fail Multy ok! Grazie.