eric963

Great script!!! Been having a blast with it. Loaded up the new b5_1 and I get this error when the script tries to load 00057.071 ERROR DCS: Mission script error: : [string "C:\Users\Eric\AppData\Local\Temp\DCS\/~mis00003D88"]:1105: ')' expected (to close '(' at line 1104) near 'then' Removing the ( seems to fix the error.

Had a chance to mess around a little bit more and it seems that Alarm State Red/Green is not working on the US radars.

While testing this script out tonight I ran into a problem and I'm not sure if its me doing something wrong. I made a mission with some red side Russian SAM's and some blue side USA SAM's. I turned on the debug option so I could see what was going on. Flew around a bit and saw the red Russian SAM's blink on and off and it matched what was in the debug window but even thou the debug window was showing that some of the blue Hawk and Patriot sites should have been shut down the were still emitting, I continued to fly around for another 30 minutes and even did some fast forwarding but the blue SAM's never stopped emitting even thou the debug window was saying some of them should have. If anyone can test this and let me know I would appreciate it. Thanks Eric

DCS UH-1H Huey Thanks and Happy Holidays!!!

Thanks MBot!!! Been messing around with this the last 2 hours and it's going to add a new dimension to my missions!!!!

Quick follow-up. We tried what TigersharkBAS suggested and added a few more units to each group we were able to enter those units. Just not the leader unit of that group. Thanks Eric

Any luck with this yet? I ran into the same problem, once I load the mission on the server I start getting the not able to enter vehicle problem also. Single player or thru the ME and all works fine.

Speed, Ran this for a few hours tonight and everything was working just fine. Thanks !!! Eric

Admin commands would be a good idea.

My altitude was pretty low when I was attacking the sites with the 58's. The 58's do not seem top arc up as much as the 25's. As soon as I increased my altitude the 58's started hitting the targets. No problems at all with the 25's. Viper, if the 58's should be hitting the sites when launched below 500m let me know and I'll upload the tracks. Thanks everyone!! Eric

Anyone having any issues with KH-58's always missing Patriot and Hawk radars? Everyone I have fired seems to just overshoot them and impact into the ground just behind them. The 25's are working properly. Was testing with several missions i created with just the Hawk and Patriot sites and my plane. Thanks Eric

Is there anything we can modify so that when we issue a voice command that we don't hear the command being issued by our virtual pilot? Eric

The FC2 manual says "For airfields, if the control tower is destroyed, radio communications will not resume until a M1025 or CP SKP-11 command vehicle is brought into the area." "To prepare for such an event, you can set the mission up so that if the tower is destroyed a mobile command vehicle will be dispatched to the airbase." I can not figure out how to set the trigger for the tower being destroyed in the conditions. Do I need to place a unit near the tower and use the unit dead condition?

During single player play I have been using the VAC software to send voice commands to my wingman. Is there a setting I can change so the game does not say the command I have just given to my wingman? Thanks Eric

I'll be waiting. I sure hope there is not something screwy with my setup.

The default Lock On profile is there but by default it is set to single GPU. You use coolbits and create another profile where you have SLI enabled.

Yep, you have to use coolbits to enable the othe SLI modes. Lets see if anyone else can post some scores. And yes, the machine screams in the other SLI supported games I run.

Ok, I did a fresh Win Xp Pro install with Service Pack 2. Using the Nvidia 71.89 drivers with the most recent version of FRAPS. All tests were done at 1600x1200 using the Mig Intercept. AMD 64 4000+, 2 6800GT's, 2megs ram. Single GPU no AA/AF Avg: 53.338 - Min: 13 - Max: 110 SLI AFR Mode no AA/AF Avg: 29.162 - Min: 8 - Max: 75 SLI AFR2 Mode no AA/AF Avg: 41.194 - Min: 8 - Max: 106 Single GPU at 4AA/8AF Avg: 32.475 - Min: 8 - Max: 109 SLI AFR Mode at 4AA/8AF Avg: 17.330 - Min: 7 - Max: 64 SLI AFR2 Mode at 4AA/8AF Avg: 25.350 - Min: 7 - Max: 108 So as it stands on my SLI system the Single GPU is faster then SLI. Hope to have Lock On 1.1 soon and will test some more then. If any other people have SLI setups please post what your getting. Eric

Running test now will post shortly.

Installed the 76.50 drivers and the Lock On profile in that one is set to Single GPU also. Forced it to AFR SLI mode and same results as before. Eric Here are the Single GPU Intercpet FPS 1600x1200 no AA/AF Avg: 40.540 - Min: 11 - Max: 84 1600x1200 4AA/8AF Avg: 23.697 - Min: 8 - Max: 77

I will download them and give them a try tommorow and let ya know how it goes. Currently using the 71.89 Eric

Ok, I just finished running some test runs and here is what I have to share. First thing I noticed was that on Nvidia's SliZone web site is that Lock On is not listed any more. I know it was last week but it is not up there as of this posting. I ran tests at 1024x768,1280x1024,1600x1200, windowed and full screen with no AA/AF and 4AA/8AF. I used coolbits to allow me to set the profile for Lock-on to use SLI Mode (Nvidia sets the profile to single GPU). I was only able to use the AFR SLI mode (The SFR mode casued graphic errrors, lower half of the screen had a white look to it). There was no FPS increase, SLI mode ran just as fast as Single GPU mode, maybe at most 1 frame slower on the min FPS. As for the Mig intercept Demo, it had the same results, no FPS improvement when in SLI mode. Here are the results from the demo 1600x1200 4AA/8AF Single GPU Avg: 15.344 - Min: 8 - Max: 22 1600x1200 4AA/8AF SLI Mode Avg: 14.952- Min: 7 - Max: 22 1600x1200 no AA/AF Single GPU Avg: 26.397 - Min: 9 - Max: 63 1600x1200 no AA/AF SLI Mode Avg: 26.162 - Min: 9 - Max: 64 If I am able to find out anything usefull about SLI mode with Lock On I will post it here. All tests where with a clean install of 1.02 with no mods. Eric

I might be able to help here. I have a new SLI setup with 2 6800GT's on an AMD 64 4000+. I do not have Lock-On 1.1 yet but I can run some 1.02's for you. Is there a particular demo you want me to run? I'll benchmark with the most recent version of fraps and whatever resoloutions, AA/AF setting you want. Eric