IADC

Yeah Roger that I just seen a thread a little down through list.thanks anyway.

Has anyone one tried 2080 Ti's in SLI with VR yet?

2 x 2080ti in SLI for VR Has anyone tried or seen a thread that may have seen someone try VR with two 2080Ti cards in SLI

Yosteff, it sounds like another issue all together. I use to get this problem many versions ago. It might be a corrupt file somewhere. Did it work before? I can only suggest when loading problems occur its best to remove the game and then re install DCS World. Then install 1 Module and try it. If it works install another 1 and try again. Slowly install all the modules you have 1 by one just in case its a corrupt module. Second question what is your PC setup? CPU/GPU/RAM/HDD or SSD

Why have DCS not put on the web site in the news section that there are issues patching from 2.5.1 upward. After sitting around wondering WTF is going on and why cant i find the modules to install I finally found someone who could drag me through a CMD update.

Ok guys thanks for the update. I think old missions just need to be avoided to save stress. Would be easier to rebuild the missions from scratch and use old voice overs around similar tactical values and settings. Appreciate your comments and suggestions as always.

Wassup fellow mission builders, its good to see so many still plugging away at it. As i have been away now for a few years at least, taking a break, it has recently sparked some interest again to get back to the flight stick and maybe knock out a decent mission. With the multitude of aircraft available to fly now what if anyone can tell me is the most popular mix of combat aircraft people are flying in missions? Preference to Terrain? Aircraft mix in missions? Precision pinpoint stuff or ground pounding? Can anyone comment on taking old missions, making some changes and re saving them and if this will now work in later versions of DCS like 2.5? Thanks

New Multi Screen Options Howdy all, its been a few years now since ive played DCS consistently and I would like to know if there is any new innovative ways for setting up 3-4 screens. Can this now be done for a 3 screen setup just by using the GUI in Open Beta 2.5 or are we still having to write lua. files and tweak this and tweak that? As I cannot remember how this is done can anyone point me to a well presented tutorial for 3 screen setup.:helpsmilie: Thanks and happy landings:joystick:

I am gutted by this. He only asked me the other week when I would provide another mission. I have used his voice over help in many missions the last being Rag Tag Redemption. I am now obliged to honor this request for him and hope the community will enjoy it for him. We will meet again on the other side friend. RIP

Ok starting from scratch Can anyone see anything wrong with this.

Please see below

I make my own Helios profiles by clipping and pasting from Gadroc's A10C single touch screen. I add the A10 interface and point everything to the right target line and I get the message that DSC A10 is configured. I have done it this way from the start and it has always worked but not with 1.5. I am thinking maybe the Export Lua. file may be the problem. I did use the Captzeen Lua file configured for DCS 1.5 Would using another profile to build my helios profile conflict with Captzeen Export Lua. ?

Guys after trawling through the posts Im starting to see some similarities with my problem. I am running 3 x 1920x1200 screens and a 4th 1280x1024 touch screen. My main three screens are running Nvidia Surround. According to your posts running NV Surround stops Helios from working on the 4th screen (Analog Gages etc.) I also see that people mention running the config as 1 screen?? Do you mean the 1camera.lua?? Can someone post a screen shot of the Lua file they use for 1 screen. If I try to RUN DCS as 4 separate screens it scrunches everything up to the top of the screen making the UI unusable. Any help would be great

Can any confirm if Helios works with Nvidia Suround? My set up is 3 screens 1920x1200 = (5760 x 1200) as one with Nvidia Surround and then 1 screen on the right side 1280 x 1024 Touch Screen.

Right well that is the shits. What about Helios does that work?

Can anyone confirm if UMFCD is working with 1.5 Beta? Its not on mine all it does for some reason is reset my DCSA10 to Game mode and re adjusts the resolution. Most annoying.

Everything on this program runs fine for me. The only issue I have is when using the MFCD's on a touch screen monitor they tend to move around as I cannot lock them in place once I have selected the size I want them to be . Any help would be appreciated

Works an absolute treat with my helios setup. Couple considerations. Will there be option I later releases to lock the MFD, s in place once you have em where you want? Will be worth every penny once it is released in full. Looking forward to contributing.

Ok thanks will try that...

Re Sizing and Position For some reason the little handle to resize the MFD does not show and I cannot drag them around on the screen. Both MFD seem to be at maximum size blocking 95% of my screen from top to bottom. Is there something I am missing?:pilotfly: Crusty Jim

No one has had any problem with Easy Monitor?

Since the patch before last my Easy Monitor config no longer loads up. If this has been discussed previously can anyone point me too the posts please. PROBLEM: Easy monitor opens up and loads my config file but will not remove MFD's from cockpit in A10 and wont render the MFD's where I set them up in Easy Monitor. Merry Xmas and thanks for any help.

TM sent me some work around options to try and identify the problem with my stick failure. Once I removed the mini dinn port in the gimble where the stick unplugs it was found that one of the little wires had broken free. This was obviously not soldered properly from the get go and finally just parted from its connection. So if you have an issue where the stick loads but does not show up in the game controllers or the stick shows all the buttons are all firing at once then this is the first place to look for problems as I believe several people have experienced the same issue. Unscrew bottom plate, unscrew two screws in the mini dinn port once handle is removed then push the wire through from back to feed out the mini dinn plug so not to pull any wires off that may have been soldered poorly. Check for loose wires.

I have had mine for around 2 years now and it has worked fine with a just a few minor issues. Interesting you had the same issue. When the controller was still being recognized in the windows gaming controller applet, yes all buttons showed as being pressed. It eventually gave up the ghost though and now there is nothing. I can only presume some circuitry went haywire and eventually just burnt out. I am hoping TM will be able to provide me a replacement part so I don't have to send the whole stick back to them. Cheers for your reply though.

Well after having the slew control go down on my throttle and replacing it with a new one from TM now my Joystick is screwed. It started where it appeared all the buttons were activating at the same time then followed by not even working after a few days. The joystick is no longer recognized by windows as a gaming controller so only the rudder pedals and the Throttle show up in the windows test applet. Windows sees the Joystick under devices and printers but not as what its supposed to be. We tried a second Warthog Stick and that worked fine with no issues so its not the drivers. We tried to reset the firmware but again windows does not see it for what it is. Has anyone else experienced this and if so could TM fix it? I have emailed them and await a reply. Cheers