Ich666

It only lends itself to hover attacks, if you let it ;) Of course this is an option, but it will leave you as a sitting duck if someone decides to take a shot at you. I found the tactic of first observing from a hover, then going for a strafing run with Vikhrs and Rockets works quite well, since Rockets are fired at a much smaller distance than Vikhrs are. So while I'm running in I'm always looking for targets in the Shkval, for example AAA or Sams or hard targets => Anything thats not destroyed by Rockets or presents a danger to my chopper. Once you come close you unleash Rocket Hell on them. Strafing runs with unguided rockets are for certain not exclusive to Su-25s, there are enough videos of strafing Hinds out there on the web :)

Its already unavailable in germany... Would you be so kind and not use any copyrighted music in your video next time?

Brainless's explanation is flawed however, since not only the AP gets disabled for a short time, but also your control inputs. In this timespan you have to center your cyclic and rudder (unless you've unchained it from trim) to avoid the phenomenon described in Brainless's post.

The CCIP pipper is usually not visible unless youre using CCIP/CR modes or are in a steep dive/low above the ground.

Did you unbind your Joystick in the Combined Arms Keybinds?

Quite an interesting read, thanks for the upload!

So what does SoftTH do to increase your fps? Im only playing with a single 1980*1080 monitor, but if it gives me a performance boost this seems to be the way to go!

It wont work, because the Mouse Axis of the X-52 isnt recognized as Axis by the game, unless you mess with your registry.

Guys, if he is playing the standalone theres no autoupdater... That said, if you bought A-10C from the Steam sale thats going on at the moment, you need to download DCS World and the A-10C module from the download section on the main page and install that. Steam is only selling the outdated standalone version, but your key will work fine if DCS World asks for it.

For the ministick: Check if its set up like this (only with the Slew keys insted of the view keys) [ATTACH]75060[/ATTACH] For the mouse button on the X-52 and the scroll wheel theres a good chance theyre set up as mouse replacement in the SST. If you want to use them in game you must set those to "Fallback". I hope this solved it.

Did you by any chance enable Force Feedback? Try disabling it and see if it works :) EDIT: Just saw that this is for Game mode. This might only apply to chas's problem.

You can try to swap axes, but really, its easier to just map it in the SST. Im pretty sure I tried everything in this regard, for me the best solution was to just map the view to the Ministick. From what it sounds like, youre trying to get Slew mapped to an Axis because you think its going to give you more precise and accurate slewing. However, this isnt the case here, the Ministick is just an ordinary D-Pad emulating a mouse of whatever buttons you assign it. The results that changing axes gave me were really not worth the effort of messing around in the registry. Sorry if Im drifting off :D You could probably get away by mapping all the Slew keys in DCS World to the buttons you mapped the Ministick to.

Yes. Replace the view keys with the shkval ones and youre good to go. EDIT: The view keys in the picture obviously.

It could be a conflict in your key mapping, check if you have Trim Reset unmapped or mapped to something safe (something you wont touch when firing :) )

What will happen if you add MP? The propeller will try to hold the speed at 3000 RPM, thus will increase its pitch to do this. This increases thrust, as the propeller now moves more air due to its increased pitch, while still having constant RPM. EDIT: Yo-Yo sniped me there. Should really type faster next time ;)

That would however not explain why the Outer Hardpoints and the cannon still fire...

This sounds interesting.

I remember being in that mode once. No idea how I did it, but its awesome, I will take a look at your elaboration when Im coming back for sure, thanks for pointing me in the right direction.

Great Work ED!

http://forums.eagle.ru/showpost.php?p=413295&postcount=8 http://walkarounds.airforce.ru/avia/rus/kamov/ka-50/ Can you give us more details on the possible pricing?

Im having this problem, even though there was a fix apparrently, Im still facing the issues described in the OP and PeterP's excellent description of it.

You should probably read the last two pages before posting... Anyways, Im aware of the fact that we went slightly off-topic, so I suggest we continue here: http://forums.eagle.ru/showthread.php?t=80992&page=13

Thats exactly what was described in the thread i linked and what was supposedly fixed in 1.1.1.1. However it seems to still be a problem, if you tried to trim the russian way youll notice that its nearly impossible in BS2/World, while theres no problem in BS1. From my point of view its working "as intended" in BS1, the helicopter flies much more stable in general. Maybe something with coding knowledge should look into this, its clearly not fixed.

OK, it looks like we're having this Issue: http://forums.eagle.ru/showthread.php?p=1321019#post1321019 Its a shame it never got fixed, today I did a quick test in BS 1 and everything worked flawlessly. This is a problem especially for FFB stick users, since your stick gets really loose when you hold down the trimmer and in combination with the bad framerates this leads to everything but a controlled flight. How about fixing this ED?

Good Idea!