Skulleader

Hi, Yes I know this problem and I've tested on small Mod who change the textures of the propreller but always this problem. In fact with my Spitfire and if I fly over the mountains and I look at right side or left side the trees I loose 30 FPS. If I look forward through the propeller now problem, I have 60 FPS. About my mirors they are OFF... Thanks for your help, best regards. Skull

Hello, My DCS World is v1.5.5 "Stable" version and with the Spitifre when I takeoff of Kutaisi to Batumi and when my Spitfire goes over the mountains and trees at low altitude my FPS drop at 40, when I'm not over the moutains and trees my FPS are 60. Please can you tell me if it's a problem with the Spitfire or DCS ? I ask you this question because if I use the same flight plan with A-10C, Mirage 2000, etc no problem with FPS. One idea ? In advance a great thanks, Skull.

Habu69, It's a real pleasure to help you, conflict with graphic driver why not, I never test this idea. With my GTX 980 I use 365.10 and for the moment I do not installed the last driver from Nvidia "376.33". With my settings I have 60 FPS (50 above cities) but I have few stutters with the last versions of DCS, with all these upgrades it's really hard to find the best settings. Bye, Skull.

Hell guys, Just this little message for thanks Ranger79 because without your incredible Mod our DCS is really poor on the ground. Thanks again, Skull.

I think like Zaelu, I bought your C-101 for his release but since many long month your module is uninstaled from my DCS and I'm not sure that one day I will use it. With the Hawk, C-101 and Mirage 2000 these three are not good for me, very far of other modules...

Habu 69, You have the same problem with Falcon 4 BMS ? It's very strange this problem, tomorrow I send an message to Natural Point forum. Maybe we can have one solution... EDIT: Here my question from Natural Point: https://forums.naturalpoint.com/viewtopic.php?f=60&t=14131 Thanks for your feedback, Skull.

Hi ;) If you edit this file "db_units_ground.lua" you can read all the cargo load for the Mi-8: cargo( "uh1h_cargo", _("uh1h_cargo"), "ab-212_cargo", 100, 1000, {"Cargos"}, 100, 10000 ); cargo( "ammo_cargo", _("ammo_cargo"), "ammo_box_cargo", 1000, 1500, {"Cargos"}, 1000, 2000 ); cargo( "f_bar_cargo", _("f_bar_cargo"), "f_bar_cargo", 823, 823, {"Cargos"}, 823, 823 ); --f_bar_cargo cargo( "m117_cargo", _("m117_cargo"), "m117_cargo", 840, 840, {"Cargos"}, 840, 840 );--m117_cargo cargo( "iso_container", _("iso_container"), "iso_container_cargo", 3800, 4500, {"Cargos"}, 3800, 10000 );--iso_container cargo( "iso_container_small", _("iso_container_small"), "iso_container_small_cargo", 220, 3200, {"Cargos"}, 2200, 10000 );--iso_container_small cargo( "barrels_cargo", _("barrels_cargo"), "barrels_cargo", 480, 480, {"Cargos"}, 100, 480); cargo( "container_cargo", _("container_cargo"), "bw_container_cargo", 100, 1200, {"Cargos"}, 100, 4000 ); --container_cargo cargo("tetrapod_cargo",_("tetrapod_cargo"),"tetrapod_cargo",5000,5000,{"Cargos"}, 5000,5000); cargo("fueltank_cargo",_("fueltank_cargo"),"fueltank_cargo",800, 2400,{"Cargos"},800,5000); cargo("oiltank_cargo",_("oiltank_cargo"),"oiltank_cargo",700, 2300,{"Cargos"},700,5000); cargo("pipes_big_cargo",_("pipes_big_cargo"),"pipes_big_cargo",4815, 4815,{"Cargos"},4815,4815); cargo("pipes_small_cargo",_("pipes_small_cargo"),"pipes_small_cargo",4350, 4350,{"Cargos"},4350,4350); cargo("trunks_small_cargo",_("trunks_small_cargo"),"trunks_small_cargo",5000, 5000,{"Cargos"},5000,5000); cargo("trunks_long_cargo",_("trunks_long_cargo"),"trunks_long_cargo",4747, 4747,{"Cargos"},4747,4747); Also the same informations here: C:\Program Files\Eagle Dynamics\DCS World\Data In this moment I use the Mi-8 with cargos missions and all these loads are available in the Mission Editor. Maybe you have a problem or bug with your DCS Worls, maybe you must repair your DCS ? Bye, Skull.

After many installation of my DCS always this problem... My OS is Windows 8.1. Skull.

Reflected please can you tell me if your mission is available to download ? I really like your farp and I would like to know how you have put all these equipments on the farp. A great thanks in advance. Skull

Hello, Hello, I need your assistance for understand how work the Artificial Horizon with the Spitfire. Before to start the engine the Artificial Horizon is good but after to have started my engine the Artificial Horizon is wrong, not parallel with teh ground. I would like to know if one time inside the cockpit and the battery ON I must wait few minutes for started the engine ? If I create a fast mission where my Spitfire is already in the air the Artificial Horizon work fine (Roll and Pitch) but after one rampstart the Artificial Horizon is wrong. One idea ? In advance a great thanks, Skull.

Thanks Cobra, it's really super !!!

Salut Kamov, Je te souhaite une très bonne année 2017, plein de bonnes choses et surtout la santé ;-) Bye, Skull.

Thanks, it's super...

Great video of the rampstart, please can you tell us if the cockpit will be completely in English because I don't speak Swedish. Thanks in advance, Skull.

Hi, I've pre-order my Viggen these few hours, now wait the official release. I'm so excited because if the Viggen is also beautiful and awesome than Mig-21bis it's the future must to have +1

Spitfire & pilot after the dogfight... EDIT: I would like to thanks the great talent of Snowsniper for his awesome skin +1

Hello, In fact after few tests I found one thing, if the distance between the cargos zone and unhook zone is not too far I can see the red smoke but if these two zones are too far the red smoke is not visible. Here I join you one screenshot where you can see two draws, in the first draw the distance between cargos zone and unhook is 3891 feet no problem I can see the red smoke. In the second draw the distance between the cargos zone and unhook zone is 1174 Nm the red smoke is not visible, so very hard to find the sone for drop my load. Thanks in advance, Skull.

Hello ;) I've created one mission with an unhook zone but after to have take my load I can't see the red smoke on the unhook zone, is it normal ? The distance between my cargo zone and the unhook zone is amost ten kilometers. Please do you have any idea why I can't see the red smoke ? Thanks in advance, Skull.

Zealu I understand you method and it's good for me but since the last update for DCS World 1.5.5.60338.212 we have more sound files into the Russian folder than the English folder, correct ? In fact 55 sound files for Russian voices versus 50 sound files for English voices So for obtain the better voice's informations during the loading's operations the best is the Russian voices or English voices ? Here a screenshot of my DCS who you can see two windows with Russian and English folders: If you have any ideas or solutions please can you inform me ? Thanks in advance, Skull.

Hello again, With DCS 1.5.5.60338.212 "Stable" there's new audio files for the cargo operations, please somebody can translate in English these audio messages from this list ? These audio messages are Russian language: above below cargaison_avulsion cargo_hooked lock_closed normal_height over_the_zone rope_was_taut taut_of_rope You can find these message at the path: Eagle Dynamics\DCS World\Sounds\Speech\Sound\RUS\Mi-8MT\Messages In advance a great thanks, Skull.

Hi Grunf, You're the best, it's perfect. A great thanks for your fast answer. Best regards, Skull.

Hello guys ;) I need you assistance because I would like to translate in French all the messages who used during the cargo operation but few words are not clear for me :cry: Please could you write exactly these messages or words that we can hear here: cargo_five_ground.wav longitudinal_swing.wav ropes_tighten.wav tension_ropes.wav transverse_swing.wav cargo_ropes_normal.wav cargo_ropes_normal_2.wav EDIT, path where you can find these speeches here: C:\Eagle Dynamics\DCS World\Sounds\Speech\Sound\ENG\Mi-8MT\Messages In advance a great thanks, Skull :thumbup:

If I don't say an error this problem or bug exist since the beginning of the Mi-8. Me too I don't like this effect...

For me it's not a problem with Oculus, with my TrackIR I've with many simulator "IL-2, FSX, Ect) and never have this problem. In fact this problem is really recent, from few upgrade. For me when I have this problem I press "ALT + TAB" and everything work fine.

This morning I've installed and reinstalled DCS 1.5.5 but always the same problem with the Mig-21. Just with module...