aracas11

Oops My mistake. Nvidia profile inspector was loading the DCS profile on sim launch. Out of the box this profile has frame limit off. I have now set the frame limit to 72 in the Nvidia DCS profile. Now when in the sim menus the fps is 72 I can`t do a test flight at the mo because the quest is flat. I will report back.

Hi All I`m having the same issue. I have a Quest 3 at 72 Hz and the frame rate keeps hunting around from 67 to 75 fps. As soon as the frame rate moves from 72 it stutters. I have a 9800x3d , Palit RTX5090, 64 GB of RAM at 6200, and a Crucial T705 2T. I have noticed that the Nvidia frame rate limiter isn`t working in DCS it did work previously. If I set it to 72 and run the sim in 2D (1080p) I get around 270 fps over Cairo at a 100 feet and 300 fps in the menus. If I then run Port Royal with the limiter on it`s locked at 72 fps. When I turn off the Nvidia limiter and use the in sim one set to 75 in 2D I have 75 fps in the menus and missions. With the in sim limiter set to 75 fps the frame rate in VR is still hunting around and I`m still getting stutters. The 5090 is running at around 64c when in mission and the CPU is well within it`s operating range. The CPU isn`t clocked the GPU is but I get the same result when it`s unclocked. Thanks Dave

Hello Mate Sorry I`ve just done my tax return ! :). It was just an example of a traversing axis using a linear pot. I had thought of making a flexi site doing something similar. Your project sounds great and if I can add anything usefull I will. Good luck.

I thought you might of been interested in the hardware not which module I use it with. But I won`t bother next time.

Hi Hannibal Sounds great I`ve made loads of bits and pieces for control inputs. I currently have a converted paper guillotine with a liniar pot for my FA18 throttle.

I`m having similar problems. I use a combination of two 7 port powered hubs and direct USBs on the motherboard. Sometimes it can drop a device but in the last couple of days it has become very frequent. I thought it might have somthing to do with Windows 10 rather than DCS.

I thought when they said most realistic simulation of a carrier they meant from a pilots perspective. Not a detailed inner workings including radar ops etc.

Hat I`ve programmed it to a hat switch at the mo and it works great.

Make ya own

Fantastic ! Hi all Got my Crosswinds about 14 days ago and have blown my brains out in the Huey. Absolutely fantastic!. Great service. Great product. Thank you very much Milan :pilotfly:

Bear in mind you have to wait quite a while to get pemission to taxing because of the number of flights in front of you. I thought there was still a problem but once all the flights were airborne you will get permission.

YeHa Just played mission 3 after latest update and it played perfectly :gun_rifle:

Hi Guys Gotta chime in here. The seat is fantastic and Andre doessn`t mess about. It couldn`t of got to me quicker if it was dropped off a Bear and if I forget to switch it on the A10 seems lifeless. Thanks Andre great service , great product !.

How about this ? :)

Hey Colyoap Thanks I tried opening the mission in the editor and the campaign bumped me back to mission 2. Cheers Aracas

Mission 3 Hi all. I do my start ups at the beggining of mission 3, I ask for and get permission to start engines from ATC but then I can`t get permission to taxi and my wing man won`t follow me to the runway. I`m using normal comms not easy comms and have no problem contacting tower in 1.5. Many thanks

Hi all Is there a diagram that shows the MOA for the BFT10 Instrument Flight Plan Navigation. Thanks Aracas

Well I passed the emergencies mission and moved onto the instrument landing mission, after umpteen attempts I was about to ace it when the instructor crashes into me on finals ! :(. Shame I didn`t get to my Master Arm and Gun Arm quick enough. Has anyone else had this happen ?.

Thank you very much . Aracas

No I don`t have imortal selected unlimited weapons etc or any of the game modes. I set up a mission in the editor to replicate the emergencies mission and at first only some of the failures occurred. When I set mission options to force failures it played out as planned.

Hi Sabre I`ve passed the BFT08 with a Q rating. I responded to the CDU failure correctly by shutting it down then after four seconds restarting it even though it didn`t shut down on its own in the first place. I then got a responded correctly message and the rest of the mission played out correctly. Thanks Aracas

Thanks Sabre I`ll do that. I`m going to do the whole thing once more from top to bottom anyway once I`ve played through it. Cheers mate Aracas

Hi Sabre Yes it happens in both practice and qual. Great campaign by the way , it has taught me a lot and can`t wait to get on with it :) . All the previous missions both practice and qual have played perfectly and when I reinstalled the campaign I didn`t loose my place. Thanks again.

On watching the video I have noticed the cadet merely shuts down the left engine allows it to cool then initiates a restart. I am shutting down the engine starting the apu then apu power followed by motoring the engine til bellow 150c then initiating a restart .

Hi Sabre I have uninstalled then reinstalled the campaign but still no luck. I pass the left engine shut down and restart it then informs me of impending failures then nothing then it informs me that I failed to respond correctly . Many Thanks Aracas