alpha7-bravo4

TYVM :thumbup:

THX :thumbup:

Now it make absolute sense :thumbup: Will do that.

Haaa Haaha OMG such an easy solution :megalol:. TYVM :thumbup:

Home Fries ! Really looking forward to the F16 profile. I enjoy CTS since a long time a lot. ATM I'm struggling with the F18 profile. In detail I try to get work the mapping of the Boat Switch as Mastermode. Warthog: Boat Switch as Master Mode Select is set to 1 Script is new compiled but regardless what I try it is mapped to Engine Crank left and Engine Crank right and Engine Crank off. I thougt I can solve it with a look in the scripts but to be honest this is to high for me :doh: Any suggestions what I can do ? alpha7-bravo4 aka alex PS: I use no (zero) MFD's

Hi folks I use ATM a 4 screen setup. 3 Screen for the world view and fourth for the glascockpit with Helios and or Icarus. Does anybody know if it's possible to change the place for the chatbox and the radio messages? For me it seems they are always on fixed coordinates on the defined center viewport.

Great trailer looking forward [emoji41]

Short update I've installed a second OS (Win10) and it seems that it works now :lol: . In my warping software I can set for desktop warping and directx warping different calibration/warping profiles. The software recommandation is not use the multicam calibration/warping profile for the desktop warping. But exactly that was the key in Win10. After I loaded this profile and ignored the warning I've got back my nice warped screen In my Win7 Installation it does still not work. But to be honest it is an 5 year old installation and I'm not sure if there are some bad settings or fragments inside. So I will go on with Win10. In any case ATM it looks good. Unfotunately my USB to VGA converter does not work with Win10. But I've tested the MFCD export instead with an HDMI Display successfull. So for the moment I would say case closed. Thanks for the feedback folks. greets alex

Not really because the monitor.lua file was created by my warping software. useAbsoluteFOV = seems to lock the FOV to the defined value by viewport. About the AbsoluteAnglesShift I can't really say something ATM.

I will try this out and report back the result. Thank you. @BravoYankee4 of course it takes some additional fps but I'm satisfied with the current result.

A very special question about multi cam setup for my home cockpitwith Hi Folks, normally I'm able to solve my things with a lot of reading and try and error engineering but in this case I'm out of ideas and hopefully the community power can help me. Description of my problem: I'm working on a self build cockpit (it's still in a early stage but slowly I make some progress) and at the moment I try to define the exports for the additional displays. So far so good. Now you have to know that my screen setup is a bit special. I use a tripple (ATM maybe later more) projector and multi cam setup. My Screen is a cylindric curved screen (ATM maybe later it will be a partial dome). You can see the dimensions on the posted image below: This is my Windows Screen setup (the right screen is a 800 x 600 display in portrait mode attached via a USB to VGA Converter. The left and main screen contains 3 x Benq Projector connected via a Displayport to HDMI box on a AMD R290x : To get an undistorted image on the curved screen I use a warping and image blend software called Immersive Display Pro with the addtional modul Immersive Calibration Pro. In the calibration software is also a feature which creates a monitor.lua file für DCS. This workes perfect fine and the result is impressive. Here is for example the generated monitor.lua file for my setup look at the special values useAbsoluteFOV = true and useAbsoluteAnglesShift = (I never saw this before) : and now finally my problem as long as I use this monitor setup without any customization all is good but if I try to export a additional display (for tests I use the HDD of the SU27) the perfect screen is broken. What I can say for the moment is that the problem starts when I change the custom resolution in the DCS options in my case from 5760 x 1080 to 6360 x 1080 regardless if I define a MFCD export or not. Here are two links to pictures I've made for a better illustration same settings the only thing I've changed was in the DCS resolution in the options from 5760 x 1080 to 6360 x 1080. The view angle I used for the pictures was intended to illustrate that the perspective works also when you look down or up: 5760 x 1080 perfect aligned and undistorted image 6360 x 1080 corupted image remember I've only changed the resolution in DCS :cry: I've also contacted Fly Elise before I started this post about this issue but the answer was I have to ask ED how I have to define the settings to prevent a aspect ratio change of the main display ^^. I hope really someone can help me. I will wait a bit to see if someone with a similiar setup has a solution if not my next step and last chance will be to open a ticket at ED support. In any case thanks in advance. greets from alpha-bravo aka alex

Here is a very interesting discussion ongoing. (with a lot of explanations) https://www.reddit.com/user/Dragon029?count=26&before=t1_d0r62ye

+1 :thumbup:

+1 [emoji4]

Short info for all which are waiting for their game seat. In my case the last tracking message was send on january 6 until today no message. My game seat was delivered today [emoji4]. Many many thanks to andre for his help and time he invested !!!!! For all wating folks be patient [emoji6]

Thank you for this great guide :thumbup: !

Thank you

Found this thread today. This looks amazing. How can I buy the jetseat? The webshop seems not support english. Andre I've seen in one of the first post that you helped in the past some people to get the seat. I'm here in Austria. Can give me some advice how I can buy a seat ? Thank you [emoji4]

+1 this is a very bad thing for pit builders. Please return the commands! Thank you.

Not 100% sure about this but I guess I noticed on my system (2 x R290x) that clockspeeds of both cards have to match exactly to avoid microstutters. It was more or less a lucky shot but during my experiments with all kind of combinations I reactivated the good old RadeonPro Tool to inject the gpu clockspeed, fps, vram usage , test different vsync settings and so on. Because of this I noticed one card was overclocked and the second not. I guess this was a fragment of an old game profile. Not much time ATM but I did a short test yesterday with the last 1.5 build without RadeonPro and default CCC settings. I use Eyefinity with 5880 x 10xx on triple 24" with AMD CF. Ingame I used the default 1 Monitor setup with recommended settings from the first post. Did a quickstart intercept mission with the F15 and noticed nothing special or in other words solid 60 FPS (I use vsync). Maybe it's worth to check the clockspeed of the gpu's. only my two cent

:pilotfly: Yes me too :thumbup: Donation is done :pilotfly:

Good news [emoji4] and thank you for the link.!

Hi Capt Zeen, thank you for the additional keyboard layouts !! Works Helios with your KA50 Profile with DCS 1.5? I ask because I saw in a other thread that in DCS 1.5 some commands are changed or ATM not available (fortunately a dev posted they will add them again). I dont know ATM if this is also valid for the KA50. But I stopped with the building of my cockpit until it's clear.